Verified license

E2CR Inc

Baltimore, MD · Baltimore CountyWell drilling and pump installation

Call (410) 737-9100
License status
Active
checked September 30, 2026
License number
MWD161, MGD173, JGD122, MGD175
Maryland record
Services
6
Geothermal and more

About E2CR Inc

E2CR Inc is a well drilling and pump installation contractor based in Baltimore, MD (Baltimore County). The Maryland licensing program lists license MWD161, MGD173, JGD122, MGD175 as active, and we last checked the record on September 30, 2026.

The state record covers geothermal, pump installation, pump repair, well abandonment, well drilling and well repair.

This profile is built from public state license records checked on September 30, 2026. Well Water Insider does not rate or endorse contractors. Own this business? Claim the profile to add photos, hours and a description.

License record

Verified against state records
License number
MWD161, MGD173, JGD122, MGD175
License type
Well drilling and pump installation
Status
Active
Expires
June 1, 2027
Last verified
September 30, 2026

Check this license yourself on the official Maryland lookup.

What the state record says

License details

  • Maryland licensees at this company on the State Board of Well Drillers roster: Edward Hill
  • MWD161, master well driller, general)
  • Brian K. Siwinski Sr. (MGD173, master well driller, geotechnical)
  • Darrell Gough (JGD122, journeyman well driller, geotechnical)
  • Darrell W. Gough Jr. (MGD175, master well driller, geotechnical
  • Licenses run through June 1, 2027.
  • Wells themselves need a county health department permit under COMAR 26.04.04.

How licensing works

  • Maryland licenses the individual under Title 13 of the Environment Article and COMAR 26.05.
  • A master well driller may construct, repair and abandon water wells (the water supply specialization is limited to water wells, the general one includes geothermal and other wells) and install pumps, a pump installer may install and repair pumps and pitless units, and a water conditioner installer may install treatment equipment.

Services

What the Maryland record says E2CR Inc is licensed or registered to do.

Geothermal

Drilling closed-loop boreholes for ground-source heat pumps.

Pump Installation

Setting a new submersible or jet pump with the pressure tank, switch and controls.

Pump Repair

Tracking down low pressure, short cycling or no water, then repairing or replacing parts of the pump system.

Well Abandonment

Sealing an unused well to state standards so it cannot carry surface water down into the aquifer.

Well Drilling

Drilling a new private well, setting the casing and grouting it the way state rules require.

Well Repair

Fixing casings, caps, pitless adapters and other parts of an existing well.

Want to compare more than one quote?

Send one free request and hear back from up to 3 licensed well contractors near Baltimore.

Service area

Based in Baltimore County, Maryland.

Approximate location (Baltimore County)

Well water in Baltimore County

Useful context before you call a contractor here.

People on wells7%of residents in Baltimore County, about 57,500 people (USGS estimate, 2010)
Test at home saleNot requiredNo statewide rule in Maryland, but some local areas require one.
Open the Baltimore County well guide

Typical costs for these services

National ranges to help you read a quote. They are not prices from E2CR Inc; ask for a written estimate.

Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself
National 2026 ranges. Sources, checked September 2026: HomeGuide cost guides and Angi.

Certified labs nearby

Test your water before and after any work on the well.

All labs near here

Before you hire

  1. 1

    Confirm the license

    Look up license MWD161, MGD173, JGD122, MGD175 on the Maryland state lookup and make sure it is active for the work you need. Open the Maryland lookup.

  2. 2

    Get a written estimate

    Ask for the scope, parts, depth or pump size, permit fees and warranty in writing. Compare two or three quotes for big jobs.

  3. 3

    Ask about permits and the well log

    New wells and many repairs are reported to the state. Ask who files the paperwork and for a copy of the well log.

  4. 4

    Test the water after the work

    Any work on a well can disturb bacteria. Test for coliform bacteria once the job is done.

Questions about E2CR Inc

Is E2CR Inc licensed?

Yes. The Maryland record shows license MWD161, MGD173, JGD122, MGD175 (well drilling and pump installation) with the status "active", last checked on September 30, 2026. You can confirm it on the state lookup.

What services does E2CR Inc offer?

The state record lists geothermal, pump installation, pump repair, well abandonment, well drilling and well repair. Call to confirm they take on your type of job.

What areas does E2CR Inc serve?

The business is based in Baltimore County (Baltimore, MD).

How do I contact E2CR Inc?

Call (410) 737-9100 and visit their website. The address on the state record is 1405-A Parker Rd, Baltimore, MD 21227.

Other licensed contractors near Baltimore

Carroll Water LLC

Verified license

Cockeysville, MD · Baltimore County

License MWD553, JWD417, PI0074, WCI050 Active

  • Pump Installation
  • Pump Repair
  • Water Treatment
  • Well Abandonment
  • Well Drilling
  • Well Repair

Free quotes

Get quotes from licensed local pros

Your request goes to Well Water Insider’s network of licensed well contractors near you, not to E2CR Inc. To contact E2CR Inc directly, call (410) 737-9100.

Free, with no obligation. See our Privacy Policy and Terms.