Arizona county well guide

Well Water in Yuma County, AZ: Testing, Contractors and Rules

About 11,000 people in Yuma County, 6% of residents, get their water from a private well. Nobody tests that water unless the owner does.

6%of residents on a private well
Share on private wells
Yuma County6%
Arizona4%
5licensed contractors serve the county
3 mito the nearest certified lab, Eurofins Microbiology Laboratories (Yuma). Call first: it may not take homeowner samples
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.

Most of Yuma County is on public water, but a 2010 U.S. Geological Survey estimate counts about 11,000 residents (6%) on private wells, above the Arizona figure of 4%. State well records list 1,574 household wells in the ADWR Well Registry drilled since 1990, with a median depth of 200 feet. If yours is one of them, testing and upkeep are up to you.

Local rules for wells in Yuma County

Private wells in Yuma County follow Arizona's statewide rules, administered by the Arizona Department of Water Resources. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No state water test. ADWR requires a Notice of Intention to Drill ($100 for most home wells) and a licensed driller, and on lots of 5 acres or less the county or local health department signs off on the notice.

Water test when a home is soldNot required statewide

No state requirement. The standard real estate well addendum has the buyer's inspector test the water only if water quality matters to the buyer, and escrow files the change of well ownership with ADWR. Some lenders require a test.

What the state recommends

New wells: arsenic, coliform bacteria, fluoride, lead, nitrate, total dissolved solids and uranium. Every year: coliform bacteria and nitrate. Every 5 years: arsenic, fluoride and uranium (ADHS). See the full list by region below.

Free or low-cost testingAvailable

No statewide free program. Testing is done by ADHS licensed commercial labs; a bacteria test runs about $55 at one lab.

Getting your water tested near Yuma County

2 certified labs are within 40 miles of Yuma County, the closest being Eurofins Microbiology Laboratories (Yuma) in Yuma (about 3 miles from the county's population center). None of them lists homeowner samples, so call first or use a mail-in kit from a state-certified lab.

Licensed well contractors serving Yuma County

5 licensed contractors list Yuma County as a home base or service area, including Aqua 2000 Water Well & Drilling Services, LLC and Nicklaus Engineering, Inc. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

In state well records, the median household well in Yuma County is 200 feet deep, and the middle half run 180 to 220 feet (1,574 household wells in the ADWR Well Registry drilled since 1990). Contaminants worth testing for in this part of Arizona include arsenic, fluoride, uranium, and nitrate. A first full panel tells you which of them apply to your well.

Typical well depth
Median well200 ft
Most wells180 to 220 ft
Based on1,574 wells

Household wells in the ADWR Well Registry drilled since 1990. "Most wells" is the middle half.

Contaminants to test for
  • ArsenicAbout 1 in 5 groundwater sites over the 10 ppb limit
  • FluorideOften above 1 ppm
  • UraniumNaturally occurring, mainly in the north
  • NitrateFarms and septic systems
  • Coliform bacteriaSeptic leaks and animal waste
  • High total dissolved solids
  • SeleniumSan Simon River and Yuma County rivers
  • Hexavalent chromiumAround Kingman

Neighboring counties: La Paz County, Maricopa County, Pinal County, Mohave County.

Typical well costs: national price ranges

Bacteria test (coliform and E. coli)$10 to $60state, county and university lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: HomeGuide cost guides, Angi: cost to shock a well.

Questions Yuma County well owners ask

How many people in Yuma County use a private well?

The U.S. Geological Survey estimates about 11,000 people, 6% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 1,574 household wells in the ADWR Well Registry drilled since 1990.

Where is the closest certified lab to Yuma County?

Eurofins Microbiology Laboratories (Yuma) in Yuma, about 3 miles from the county's population center. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Yuma County?

No state water test. ADWR requires a Notice of Intention to Drill ($100 for most home wells) and a licensed driller, and on lots of 5 acres or less the county or local health department signs off on the notice.

What does a well test cost near Yuma County?

Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Mail-in kits cost about the same as walking in.