Broward County Environmental Monitoring Laboratory
Homeowner samples
- Arsenic
- Lead
About 19,500 people in Broward County, 1% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
Private wells serve a minority in Broward County: about 19,500 people, 1% of residents, by the U.S. Geological Survey's 2010 estimate, one of the lowest shares in Florida. If yours is one of them, testing and upkeep are up to you.
The rules that apply in Broward County are set at the state level in Florida. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
No statewide water test for a new well. What is required is a well construction permit from your water management district (or the county health department where the district has delegated permitting) before drilling, a licensed water well contractor, construction to the Chapter 62-532 standards (grouted casing, disinfection) with the Department of Health setback of 75 feet from a septic system (Rule 64E-8) and a completion report from the driller. The exception is a delineated area under Chapter 62-524: where groundwater is known to be contaminated, a new drinking water well needs a permit through the county health department and the water is sampled and cleared before the well is used.
No statewide requirement. Some lenders require a water test before closing, and buyers of homes in delineated contamination areas should ask the county health department for the well's file.
The Florida Department of Health recommends a coliform bacteria and nitrate test at least once a year and a lead test every three years, plus arsenic, ethylene dibromide and naturally occurring radionuclides where the county health department advises it. Add hardness, iron, sulfide, sodium and chloride on a first test, and test again after flooding, a hurricane, repairs or any change in taste, color or smell.
The Department of Health's Well Surveillance Program samples private wells near known contamination sites free of charge and notifies owners of the results; if your well is inside a delineated area you may already be on the list. Elsewhere, county health departments give out bottles and instructions and test bacteria and nitrate for about $20 to $30 a sample, or $30 to $40 more if staff collect it.
The nearest certified lab that takes samples from homeowners is Broward County Environmental Monitoring Laboratory in Davie, about 4 miles from the county's population center. 6 certified labs are within 40 miles in all. One of them says it takes samples from homeowners.
6 certified labs within 40 miles of this county
Homeowner samples
Licensed help in Broward County includes Anderson Water Well Drilling and Association Water Well and 33 others. Every listing was matched to the Florida license list; the "verify" link on each profile opens the state lookup.
35 licensed contractors
License 11019 Active
License 11190 Active
License 1215 Active
License 11183 Active
License 11166 Active
License 11054 Active
License 1618 Active
License 1912 Active
License 11057 Active
License 1437 Active
License 11370 Active
License 11022 Active
We have no county-level well records for Broward County yet. Statewide, depth varies widely across the state; logs of nearby wells are the best guide. Most of the state draws from the Floridan aquifer, with shallower surficial wells in parts of the Panhandle and southwest Florida and the Biscayne aquifer under Miami-Dade, Broward and Palm Beach. Contaminants worth testing for in this part of Florida include coliform bacteria, nitrate, hydrogen sulfide and hardness, and iron and tannin-stained water. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Miami-Dade County, Palm Beach County, Hendry County, Martin County.
Lab fees: Bacteria test through a county health department ($17) or direct at the state lab ($40); certified labs set their own nitrate prices. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Florida Department of Health: well water testing, Florida DOH in Indian River County, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 19,500 people, 1% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
Broward County Environmental Monitoring Laboratory in Davie, about 4 miles from the county's population center. It says it accepts samples from homeowners.
No statewide water test for a new well. What is required is a well construction permit from your water management district (or the county health department where the district has delegated permitting) before drilling, a licensed water well contractor, construction to the Chapter 62-532 standards (grouted casing, disinfection) with the Department of Health setback of 75 feet from a septic system (Rule 64E-8) and a completion report from the driller. The exception is a delineated area under Chapter 62-524: where groundwater is known to be contaminated, a new drinking water well needs a permit through the county health department and the water is sampled and cleared before the well is used.
Published lab fees in Florida: $17 to $40 for a bacteria test (Florida Department of Health: well water testing, Florida DOH in Indian River County). Mail-in kits cost about the same as walking in.