Eurofins Port St. Lucie
- Coliform Bacteria
About 11,749 households in St. Lucie County, 10% of the county, rely on a private well. Nobody tests that water unless the owner does.
About 11,749 homes in St. Lucie County are on a private well. That is 10% of households, enough that every township has well owners and few of them have had the water tested recently.
The rules that apply in St. Lucie County are set at the state level in Florida. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
No statewide water test for a new well. What is required is a well construction permit from your water management district (or the county health department where the district has delegated permitting) before drilling, a licensed water well contractor, construction to the Chapter 62-532 standards (setbacks from septic systems, grouted casing, disinfection) and a completion report from the driller. The exception is a delineated area under Chapter 62-524: where groundwater is known to be contaminated, a new drinking water well needs a permit through the county health department and the water is sampled and cleared before the well is used.
No statewide requirement. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing, and buyers of homes in delineated contamination areas should ask the county health department for the well's file.
The Florida Department of Health recommends a coliform bacteria and nitrate test at least once a year and a lead test every three years, plus arsenic, ethylene dibromide and naturally occurring radionuclides where the county health department advises it. Add hardness, iron, sulfide, sodium and chloride on a first test, and test again after flooding, a hurricane, repairs or any change in taste, color or smell.
The Department of Health's Well Surveillance Program samples private wells near known contamination sites free of charge and notifies owners of the results; if your well is inside a delineated area you may already be on the list. Elsewhere, county health departments give out bottles and instructions and test bacteria and nitrate for about $20 to $30 a sample, or $30 to $40 more if staff collect it.
The nearest certified lab is Eurofins Port St. Lucie in Port St. Lucie, in the county. There are 2 more within 40 miles, listed below with what each tests for.
3 certified labs within 40 miles
Homeowner samples
Licensed help in St. Lucie County includes A&c Well Drilling and Absolute Water Service, Inc and 11 others. Every listing was matched to the Florida license list; the "verify" link on each profile opens the state lookup.
13 licensed contractors
License 2273 Active
License 11247 Active
License 2928 Active
License 11329 Active
License 11259 Active
License 11343 Active
License 11134 Active
License 2399 Active
License 11352 Active
License 11320 Active
License 11024 Active
License 7124 Active
Well depth and water chemistry in St. Lucie County follow the rock underneath it. Typical wells here run 20 to 80 ft in the surficial aquifer of the Panhandle, the Suwannee valley and southwest Florida; 100 to 400 ft in the Floridan aquifer across north and central Florida; 60 to 150 ft in the Biscayne aquifer of Miami-Dade, Broward and Palm Beach. Contaminants worth testing for in this part of Florida include coliform bacteria (shallow surficial wells, wells flooded by storms), nitrate (suwannee basin, agricultural areas).
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Martin County, Indian River County, Okeechobee County, Palm Beach County.
National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.
About 11,749, or 10% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.
Eurofins Port St. Lucie in Port St. Lucie, inside the county. Call first to ask whether they accept homeowner samples.
No statewide water test for a new well. What is required is a well construction permit from your water management district (or the county health department where the district has delegated permitting) before drilling, a licensed water well contractor, construction to the Chapter 62-532 standards (setbacks from septic systems, grouted casing, disinfection) and a completion report from the driller. The exception is a delineated area under Chapter 62-524: where groundwater is known to be contaminated, a new drinking water well needs a permit through the county health department and the water is sampled and cleared before the well is used.
A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.