Environmental Resource Analysts
- Arsenic
- Coliform Bacteria
- Full Homeowner Panel
- Hardness
- Iron and Manganese
- Lead
- Nitrate / Nitrite
Most of Chattahoochee County is on public water. About 100 residents, under 1%, rely on a private well, and testing it is up to them.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
Private wells are rare in Chattahoochee County. The U.S. Geological Survey's 2010 estimate is about 100 people, under 1% of residents, against 14% across Georgia. If yours is one of them, testing and upkeep are up to you.
Private wells in Chattahoochee County follow Georgia's statewide rules, administered by the Georgia Environmental Protection Division and the State Water Well Standards Advisory Council. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.
No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from sewer lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Some counties have their own well rules, which may include a permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.
No statewide requirement. The seller's disclosure only says whether the property is on a well. Some lenders require a water test before closing, and a few county health departments require a well inspection at transfer.
The Department of Public Health and UGA Extension recommend testing a private well for coliform bacteria every year and running the UGA basic water test (pH, hardness, nitrate and about 20 metals including iron, manganese, lead, copper and arsenic) every two to three years. Add radon and uranium in the Piedmont and the mountains, sodium and chloride near the coast, and test again after flooding, well work or a change in taste, color or smell.
Every county has a UGA Cooperative Extension office that sells the UGA water test kits at cost: the basic chemistry test (W1) is $20 and the bacteria test is $40, with results explained by the county agent. Extension and the county health departments also run periodic free or discounted testing days, and several county environmental health offices test bacteria for a small fee.
For a homeowner test, start with Auburn University Soil, Forage and Water Testing Laboratory in Auburn (about 40 miles from the county's population center), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.
2 certified labs within 40 miles of this county
Homeowner samples
No licensed contractor lists Chattahoochee County as a home base or service area yet. To give you more choice, the list below shows the 28 licensed Georgia contractors within 60 miles of the county, nearest first. Most drillers and pump installers travel well beyond their home county, so call and ask whether they cover your address.
28 licensed contractors within 60 miles of this county
License WD000533 Active
License 527 Active
License 657 Active
License 311 Active
License WD000784 Active
License 672 Active
License 15 Active
License 83 Active
License WD000527 Active
License P45 Active
License 524 Active
License 423 Active
We have no county-level well records for Chattahoochee County yet. Statewide, depth varies widely across the state; logs of nearby wells are the best guide. Piedmont and mountain wells are drilled into fractured granite and gneiss with modest yields, Coastal Plain wells draw from the Floridan and Claiborne aquifers, and some coastal and flatwoods wells are shallow surficial wells. Contaminants worth testing for in this part of Georgia include coliform bacteria, acidic corrosive water that pulls lead and copper from plumbing, iron and manganese, and radon and uranium. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Marion County, Stewart County, Harris County, Webster County.
Lab fees: County health departments ($30 bacteria) or the UGA lab through your extension office ($40 bacteria, $12 nitrate, $60 expanded test). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Southeast Health District, UGA Agricultural and Environmental Services Lab, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 100 people, under 1% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
Auburn University Soil, Forage and Water Testing Laboratory in Auburn, about 40 miles from the county's population center. It says it accepts samples from homeowners.
No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from sewer lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Some counties have their own well rules, which may include a permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.
Published lab fees in Georgia: $30 to $40 for a bacteria test and $12 for nitrate (Southeast Health District, UGA Agricultural and Environmental Services Lab). Mail-in kits cost about the same as walking in.