Georgia county well guide

Well Water in Hall County, GA: Testing, Contractors and Rules

About 15,472 households in Hall County, 20% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
20%of households on a private well
Share on wells, county vs state
Hall County20%
Georgia average18%
8licensed contractors serve the county
23 mito the nearest certified lab, American Water Services
Nostatewide test required when a home is sold

About one in 5 households in Hall County relies on a private well, around 15,472 homes. Outside the towns with public water, wells are the norm here.

Local rules for wells in Hall County

The rules that apply in Hall County are set at the state level in Georgia. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from property lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Several counties, mostly in north Georgia and around Atlanta, require a well permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.

Water test when a home is soldNot required statewide

No statewide requirement. The seller's disclosure only says whether the property is on a well. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing, and a few county health departments require a well inspection at transfer.

What the state recommends

The Department of Public Health and UGA Extension recommend testing a private well for coliform bacteria every year and running the UGA basic water test (pH, hardness, nitrate and about 20 metals including iron, manganese, lead, copper and arsenic) every two to three years. Add radon and uranium in the Piedmont and the mountains, sodium and chloride near the coast, and test again after flooding, well work or a change in taste, color or smell.

Free or low-cost testingAvailable

Every county has a UGA Cooperative Extension office that sells the UGA water test kits at cost: the basic chemistry test (W1) and the bacteria test (W33) run roughly $30 to $50 each, with results explained by the county agent. Extension and the county health departments also run periodic free or discounted testing days, and several county environmental health offices test bacteria for a small fee.

Getting your water tested near Hall County

The nearest certified lab is American Water Services in Cleveland, about 23 miles from the county center. There are 3 more within 40 miles, listed below with what each tests for.

4 certified labs within 40 miles

Licensed well contractors serving Hall County

Licensed help in Hall County includes Billy Bell Plumbing Inc and C & S Well Pump Service and 6 others. Every listing was matched to the Georgia license list; the "verify" link on each profile opens the state lookup.

Well depth and water chemistry

Well depth and water chemistry in Hall County follow the rock underneath it. Typical wells here run 200 to 500 ft in the fractured granite and gneiss of the Piedmont and north Georgia mountains, where yields are modest; 100 to 400 ft in the Floridan and Claiborne aquifers of the Coastal Plain south of the fall line, deeper (400 to 800 ft) in the southwest; shallow surficial wells of 30 to 100 ft along the coast and in the flatwoods feet. Contaminants worth testing for in this part of Georgia include coliform bacteria (statewide, worst in shallow and older wells), acidic corrosive water that pulls lead and copper from plumbing (piedmont and mountains), iron and manganese (piedmont and coastal plain).

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteria (statewide
  • Worst in shallow and older wells)
  • Acidic corrosive water that pulls lead and copper from plumbing (Piedmont and mountains)
  • Iron and manganese (Piedmont and Coastal Plain)
  • Radon and uranium (Piedmont granite
  • North metro Atlanta counties)
  • Hardness and hydrogen sulfide (Floridan aquifer in south Georgia)
  • Nitrate (southwest Georgia farm country
  • Shallow Coastal Plain wells)
  • Arsenic (locally in the Piedmont and Coastal Plain)
  • Saltwater intrusion (Brunswick and the coastal islands)
  • PFAS near carpet mills in northwest Georgia and near airfields

Neighboring counties: Dawson County, Forsyth County, Jackson County, Banks County.

What well work costs in Hall County

Basic bacteria and nitrate test$25 to $75lab fee, homeowner sample
Full panel lab test$150 to $400metals, VOCs, radiologicals
Well inspection$250 to $550flow, pressure, visual, water test
Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job

National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.

Questions Hall County well owners ask

How many homes in Hall County are on a well?

About 15,472, or 20% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Hall County?

American Water Services in Cleveland, about 23 miles away. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Hall County?

No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from property lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Several counties, mostly in north Georgia and around Atlanta, require a well permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.

What does a well test cost near Hall County?

A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.