Waypoint Analytical
- Coliform Bacteria
About 10,200 people in Paulding County, 7% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
Most of Paulding County is on public water, but a 2010 U.S. Geological Survey estimate counts about 10,200 residents (7%) on private wells, below the Georgia figure of 14%. If yours is one of them, testing and upkeep are up to you.
Private wells in Paulding County follow Georgia's statewide rules, administered by the Georgia Environmental Protection Division and the State Water Well Standards Advisory Council. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.
No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from sewer lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Some counties have their own well rules, which may include a permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.
No statewide requirement. The seller's disclosure only says whether the property is on a well. Some lenders require a water test before closing, and a few county health departments require a well inspection at transfer.
The Department of Public Health and UGA Extension recommend testing a private well for coliform bacteria every year and running the UGA basic water test (pH, hardness, nitrate and about 20 metals including iron, manganese, lead, copper and arsenic) every two to three years. Add radon and uranium in the Piedmont and the mountains, sodium and chloride near the coast, and test again after flooding, well work or a change in taste, color or smell.
Every county has a UGA Cooperative Extension office that sells the UGA water test kits at cost: the basic chemistry test (W1) is $20 and the bacteria test is $40, with results explained by the county agent. Extension and the county health departments also run periodic free or discounted testing days, and several county environmental health offices test bacteria for a small fee.
4 certified labs are within 40 miles of Paulding County, the closest being Waypoint Analytical in Bremen (about 23 miles from the county's population center). None of them lists homeowner samples, so call first or use a mail-in kit from a state-certified lab.
4 certified labs within 40 miles of this county
No licensed contractor lists Paulding County as a home base or service area yet. To give you more choice, the list below shows the 42 licensed Georgia contractors within 60 miles of the county, nearest first. Most drillers and pump installers travel well beyond their home county, so call and ask whether they cover your address.
42 licensed contractors within 60 miles of this county
License P90 Active
License P67 Active
License 9208 Active
License 3116 Active
License 227 Active
License 88 Active
License 4 Active
License 569 Active
License 580 Active
License 512 Active
License 61 Active
License 3144 Active
We have no county-level well records for Paulding County yet. Statewide, depth varies widely across the state; logs of nearby wells are the best guide. Piedmont and mountain wells are drilled into fractured granite and gneiss with modest yields, Coastal Plain wells draw from the Floridan and Claiborne aquifers, and some coastal and flatwoods wells are shallow surficial wells. Contaminants worth testing for in this part of Georgia include coliform bacteria, acidic corrosive water that pulls lead and copper from plumbing, iron and manganese, and radon and uranium. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Douglas County, Cobb County, Polk County, Bartow County.
Lab fees: County health departments ($30 bacteria) or the UGA lab through your extension office ($40 bacteria, $12 nitrate, $60 expanded test). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Southeast Health District, UGA Agricultural and Environmental Services Lab, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 10,200 people, 7% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
Waypoint Analytical in Bremen, about 23 miles from the county's population center. Call first to ask whether they accept homeowner samples.
No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from sewer lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Some counties have their own well rules, which may include a permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.
Published lab fees in Georgia: $30 to $40 for a bacteria test and $12 for nitrate (Southeast Health District, UGA Agricultural and Environmental Services Lab). Mail-in kits cost about the same as walking in.