AIRL, Inc.
- Arsenic
- Coliform Bacteria
- Full Homeowner Panel
- Hardness
- Iron and Manganese
- Lead
- Nitrate / Nitrite
About 6,700 people in Walker County, 10% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
Most of Walker County is on public water, but a 2010 U.S. Geological Survey estimate counts about 6,700 residents (10%) on private wells, below the Georgia figure of 14%. If yours is one of them, testing and upkeep are up to you.
Private wells in Walker County follow Georgia's statewide rules, administered by the Georgia Environmental Protection Division and the State Water Well Standards Advisory Council. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.
No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from sewer lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Some counties have their own well rules, which may include a permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.
No statewide requirement. The seller's disclosure only says whether the property is on a well. Some lenders require a water test before closing, and a few county health departments require a well inspection at transfer.
The Department of Public Health and UGA Extension recommend testing a private well for coliform bacteria every year and running the UGA basic water test (pH, hardness, nitrate and about 20 metals including iron, manganese, lead, copper and arsenic) every two to three years. Add radon and uranium in the Piedmont and the mountains, sodium and chloride near the coast, and test again after flooding, well work or a change in taste, color or smell.
Every county has a UGA Cooperative Extension office that sells the UGA water test kits at cost: the basic chemistry test (W1) is $20 and the bacteria test is $40, with results explained by the county agent. Extension and the county health departments also run periodic free or discounted testing days, and several county environmental health offices test bacteria for a small fee.
1 certified lab is within 40 miles of Walker County, the closest being AIRL, Inc. in Cleveland (about 35 miles from the county's population center). It does not list homeowner samples, so call first or use a mail-in kit from a state-certified lab.
1 certified labs within 40 miles of this county
No licensed contractor lists Walker County as a home base or service area yet. To give you more choice, the list below shows the 14 licensed Georgia contractors within 60 miles of the county, nearest first. Most drillers and pump installers travel well beyond their home county, so call and ask whether they cover your address.
14 licensed contractors within 60 miles of this county
License P121 Active
License P9 Active
License 628 Active
License 439 Active
License P110 Active
License 431 Active
License 735 Active
License 533 Active
License 544 Active
License 239 Active
License 3116 Active
License P120 Active
We have no county-level well records for Walker County yet. Statewide, depth varies widely across the state; logs of nearby wells are the best guide. Piedmont and mountain wells are drilled into fractured granite and gneiss with modest yields, Coastal Plain wells draw from the Floridan and Claiborne aquifers, and some coastal and flatwoods wells are shallow surficial wells. Contaminants worth testing for in this part of Georgia include coliform bacteria, acidic corrosive water that pulls lead and copper from plumbing, iron and manganese, and radon and uranium. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Catoosa County, Dade County, Whitfield County, Chattooga County.
Lab fees: County health departments ($30 bacteria) or the UGA lab through your extension office ($40 bacteria, $12 nitrate, $60 expanded test). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Southeast Health District, UGA Agricultural and Environmental Services Lab, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 6,700 people, 10% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
AIRL, Inc. in Cleveland, about 35 miles from the county's population center. Call first to ask whether they accept homeowner samples.
No statewide water test and no state permit for an individual household well. The Water Well Standards Act requires the well to be drilled by a licensed water well contractor to the state construction standards (grouted casing, 10 ft from sewer lines, 50 ft from septic tanks and 100 ft from drainfields), and the contractor must disinfect it and give you a well record. Some counties have their own well rules, which may include a permit and a bacteriological test through the county environmental health office before the well is used, so check with your county.
Published lab fees in Georgia: $30 to $40 for a bacteria test and $12 for nitrate (Southeast Health District, UGA Agricultural and Environmental Services Lab). Mail-in kits cost about the same as walking in.