Well Water in Bath County, KY: Testing, Contractors and Rules
About 939 households in Bath County, 19% of the county, rely on a private well. Nobody tests that water unless the owner does.
About one in 5 households in Bath County relies on a private well, around 939 homes. Outside the towns with public water, wells are the norm here.
Local rules for wells in Bath County
The rules that apply in Bath County are set at the state level in Kentucky. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
At a glance
No statewide water test and no permit or fee for a household well. All work on a well, including plugging it, must be done by a Kentucky certified water well driller to the 401 KAR 6:310 construction standards (grouted casing, sanitary well cap, 50 ft from a septic tank and 70 ft from a drainfield), and the driller must file the well record with the Division of Water and give you a copy within 60 days. A few local health departments ask for a bacteria sample on a new well; lenders usually do.
No statewide requirement. The Kentucky seller's disclosure form asks whether the water source is a well, spring or cistern and whether there are known problems, nothing more. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing.
The Division of Water recommends testing a private well, spring or cistern every year for coliform bacteria, and every few years for nitrate, pH, hardness, iron, manganese, lead and copper. Add arsenic in the Jackson Purchase and western coal field, hydrogen sulfide and metals in the eastern coal field, radon in the Bluegrass and Pennyroyal limestone, and test again after flooding, well work or a change in taste, color or smell. Karst wells and springs in the Pennyroyal and Bluegrass should be retested after heavy rain.
No statewide free program. Most county and district health departments will collect a private well or cistern sample and send it to the state Division of Laboratory Services in Frankfort for total coliform and E. coli, for a sampling fee of about $50; call the environmental office of your local health department to schedule. UK Cooperative Extension offices run periodic screening events in some counties.
Getting your water tested near Bath County
Bath County has no certified lab within 40 miles, so most owners here test by mail. Order bottles from a certified lab, sample from the cold tap before any treatment, and ship the same day with an ice pack.
No listings yet for this area. Try widening your search.
Licensed well contractors serving Bath County
No licensed contractor lists Bath County as a home base or service area yet. The finder below searches the whole state; most drillers travel several counties for a job.
No listings yet for this area. Try widening your search.
Well depth and water chemistry
Well depth and water chemistry in Bath County follow the rock underneath it. Typical wells here run 50 to 150 ft in the Bluegrass limestone around Lexington, where yields are small and many homes use cisterns; 100 to 300 ft in the Pennyroyal (Mississippian Plateau) karst of south-central and western Kentucky; 100 to 250 ft in the sandstone and shale of the eastern and western coal fields; 50 to 200 ft in the sands and gravels of the Jackson Purchase west of the Tennessee River. Contaminants worth testing for in this part of Kentucky include coliform bacteria (the most common failure statewide, worst in karst limestone wells and springs that draw surface water after rain), nitrate (shallow wells in farm country and the purchase), iron and manganese (coal fields and the jackson purchase).
Varies by location. Check the state well record search for logs of nearby wells.
- Coliform bacteria (the most common failure statewide
- Worst in karst limestone wells and springs that draw surface water after rain)
- Nitrate (shallow wells in farm country and the Purchase)
- Iron and manganese (coal fields and the Jackson Purchase)
- Hydrogen sulfide and methane (shale and coal-bearing rock in the eastern and western coal fields)
- Hardness (limestone across the Bluegrass and Pennyroyal)
- Acidic corrosive water that pulls lead and copper from plumbing (coal field wells)
- Arsenic (locally in western Kentucky)
- Radon (locally in limestone and black shale)
- Pesticides (shallow Purchase wells)
- PFAS near airfields and industrial sites
Neighboring counties: Montgomery County, Menifee County, Rowan County, Fleming County.
What well work costs in Bath County
National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.
Questions Bath County well owners ask
How many homes in Bath County are on a well?
About 939, or 19% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.
Where is the closest certified lab to Bath County?
There is no certified lab within 40 miles. Use a mail-in kit from a Kentucky certified lab, or the county health department if it collects samples.
Do I need a permit to drill a well in Bath County?
No statewide water test and no permit or fee for a household well. All work on a well, including plugging it, must be done by a Kentucky certified water well driller to the 401 KAR 6:310 construction standards (grouted casing, sanitary well cap, 50 ft from a septic tank and 70 ft from a drainfield), and the driller must file the well record with the Division of Water and give you a copy within 60 days. A few local health departments ask for a bacteria sample on a new well; lenders usually do.
What does a well test cost near Bath County?
A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.