Well Water in Campbell County, KY: Testing, Contractors and Rules
About 1,731 households in Campbell County, 5% of the county, rely on a private well. Nobody tests that water unless the owner does.
Most of Campbell County is on public water, but an estimated 1,731 households still rely on a private well. This page covers the rules, labs and licensed contractors that serve them.
Local rules for wells in Campbell County
Private wells in Campbell County follow Kentucky's statewide rules, administered by Kentucky Division of Water, Groundwater Section. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though lenders often ask for one. The cards below show the details and the official sources.
At a glance
No statewide water test and no permit or fee for a household well. All work on a well, including plugging it, must be done by a Kentucky certified water well driller to the 401 KAR 6:310 construction standards (grouted casing, sanitary well cap, 50 ft from a septic tank and 70 ft from a drainfield), and the driller must file the well record with the Division of Water and give you a copy within 60 days. A few local health departments ask for a bacteria sample on a new well; lenders usually do.
No statewide requirement. The Kentucky seller's disclosure form asks whether the water source is a well, spring or cistern and whether there are known problems, nothing more. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing.
The Division of Water recommends testing a private well, spring or cistern every year for coliform bacteria, and every few years for nitrate, pH, hardness, iron, manganese, lead and copper. Add arsenic in the Jackson Purchase and western coal field, hydrogen sulfide and metals in the eastern coal field, radon in the Bluegrass and Pennyroyal limestone, and test again after flooding, well work or a change in taste, color or smell. Karst wells and springs in the Pennyroyal and Bluegrass should be retested after heavy rain.
No statewide free program. Most county and district health departments will collect a private well or cistern sample and send it to the state Division of Laboratory Services in Frankfort for total coliform and E. coli, for a sampling fee of about $50; call the environmental office of your local health department to schedule. UK Cooperative Extension offices run periodic screening events in some counties.
Getting your water tested near Campbell County
2 certified labs within 40 miles serve Campbell County, starting with Q Laboratories in Cincinnati (about 8 miles from the county center). Each card below shows whether the lab takes homeowner samples and which tests it is certified for.
No listings yet for this area. Try widening your search.
Licensed well contractors serving Campbell County
No licensed contractor lists Campbell County as a home base or service area yet. The finder below searches the whole state; most drillers travel several counties for a job.
No listings yet for this area. Try widening your search.
Well depth and water chemistry
Wells in Campbell County typically reach 50 to 150 ft in the Bluegrass limestone around Lexington, where yields are small and many homes use cisterns; 100 to 300 ft in the Pennyroyal (Mississippian Plateau) karst of south-central and western Kentucky; 100 to 250 ft in the sandstone and shale of the eastern and western coal fields; 50 to 200 ft in the sands and gravels of the Jackson Purchase west of the Tennessee River. What comes up with the water depends on the aquifer, and across Kentucky the usual suspects are coliform bacteria (the most common failure statewide, worst in karst limestone wells and springs that draw surface water after rain), nitrate (shallow wells in farm country and the purchase), iron and manganese (coal fields and the jackson purchase). A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
- Coliform bacteria (the most common failure statewide
- Worst in karst limestone wells and springs that draw surface water after rain)
- Nitrate (shallow wells in farm country and the Purchase)
- Iron and manganese (coal fields and the Jackson Purchase)
- Hydrogen sulfide and methane (shale and coal-bearing rock in the eastern and western coal fields)
- Hardness (limestone across the Bluegrass and Pennyroyal)
- Acidic corrosive water that pulls lead and copper from plumbing (coal field wells)
- Arsenic (locally in western Kentucky)
- Radon (locally in limestone and black shale)
- Pesticides (shallow Purchase wells)
- PFAS near airfields and industrial sites
Neighboring counties: Kenton County, Boone County, Pendleton County, Grant County.
What well work costs in Campbell County
National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.
Questions Campbell County well owners ask
How many homes in Campbell County are on a well?
About 1,731, or 5% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.
Where is the closest certified lab to Campbell County?
Q Laboratories in Cincinnati, about 8 miles away. Call first to ask whether they accept homeowner samples.
Do I need a permit to drill a well in Campbell County?
No statewide water test and no permit or fee for a household well. All work on a well, including plugging it, must be done by a Kentucky certified water well driller to the 401 KAR 6:310 construction standards (grouted casing, sanitary well cap, 50 ft from a septic tank and 70 ft from a drainfield), and the driller must file the well record with the Division of Water and give you a copy within 60 days. A few local health departments ask for a bacteria sample on a new well; lenders usually do.
What does a well test cost near Campbell County?
A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.