Kentucky county well guide

Well Water in Monroe County, KY: Testing, Contractors and Rules

About 51 households in Monroe County, 1% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
1%of households on a private well
Share on wells, county vs state
Monroe County1%
Kentucky average10%
3licensed contractors serve the county
27 mito the nearest certified lab, IEH – Scottsville
Nostatewide test required when a home is sold

Most of Monroe County is on public water, but an estimated 51 households still rely on a private well. This page covers the rules, labs and licensed contractors that serve them.

Local rules for wells in Monroe County

Private wells in Monroe County follow Kentucky's statewide rules, administered by Kentucky Division of Water, Groundwater Section. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though lenders often ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No statewide water test and no permit or fee for a household well. All work on a well, including plugging it, must be done by a Kentucky certified water well driller to the 401 KAR 6:310 construction standards (grouted casing, sanitary well cap, 50 ft from a septic tank and 70 ft from a drainfield), and the driller must file the well record with the Division of Water and give you a copy within 60 days. A few local health departments ask for a bacteria sample on a new well; lenders usually do.

Water test when a home is soldNot required statewide

No statewide requirement. The Kentucky seller's disclosure form asks whether the water source is a well, spring or cistern and whether there are known problems, nothing more. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing.

What the state recommends

The Division of Water recommends testing a private well, spring or cistern every year for coliform bacteria, and every few years for nitrate, pH, hardness, iron, manganese, lead and copper. Add arsenic in the Jackson Purchase and western coal field, hydrogen sulfide and metals in the eastern coal field, radon in the Bluegrass and Pennyroyal limestone, and test again after flooding, well work or a change in taste, color or smell. Karst wells and springs in the Pennyroyal and Bluegrass should be retested after heavy rain.

Free or low-cost testingAvailable

No statewide free program. Most county and district health departments will collect a private well or cistern sample and send it to the state Division of Laboratory Services in Frankfort for total coliform and E. coli, for a sampling fee of about $50; call the environmental office of your local health department to schedule. UK Cooperative Extension offices run periodic screening events in some counties.

Getting your water tested near Monroe County

2 certified labs within 40 miles serve Monroe County, starting with IEH – Scottsville in Scottsville (about 27 miles from the county center). Each card below shows whether the lab takes homeowner samples and which tests it is certified for.

1 certified labs within 40 miles

Licensed well contractors serving Monroe County

3 licensed contractors serve Monroe County, including Brute LLC and Stantec Consulting Services Inc. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

Wells in Monroe County typically reach 50 to 150 ft in the Bluegrass limestone around Lexington, where yields are small and many homes use cisterns; 100 to 300 ft in the Pennyroyal (Mississippian Plateau) karst of south-central and western Kentucky; 100 to 250 ft in the sandstone and shale of the eastern and western coal fields; 50 to 200 ft in the sands and gravels of the Jackson Purchase west of the Tennessee River. What comes up with the water depends on the aquifer, and across Kentucky the usual suspects are coliform bacteria (the most common failure statewide, worst in karst limestone wells and springs that draw surface water after rain), nitrate (shallow wells in farm country and the purchase), iron and manganese (coal fields and the jackson purchase). A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteria (the most common failure statewide
  • Worst in karst limestone wells and springs that draw surface water after rain)
  • Nitrate (shallow wells in farm country and the Purchase)
  • Iron and manganese (coal fields and the Jackson Purchase)
  • Hydrogen sulfide and methane (shale and coal-bearing rock in the eastern and western coal fields)
  • Hardness (limestone across the Bluegrass and Pennyroyal)
  • Acidic corrosive water that pulls lead and copper from plumbing (coal field wells)
  • Arsenic (locally in western Kentucky)
  • Radon (locally in limestone and black shale)
  • Pesticides (shallow Purchase wells)
  • PFAS near airfields and industrial sites

Neighboring counties: Cumberland County, Metcalfe County, Barren County, Allen County.

What well work costs in Monroe County

Basic bacteria and nitrate test$25 to $75lab fee, homeowner sample
Full panel lab test$150 to $400metals, VOCs, radiologicals
Well inspection$250 to $550flow, pressure, visual, water test
Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job

National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.

Questions Monroe County well owners ask

How many homes in Monroe County are on a well?

About 51, or 1% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Monroe County?

IEH – Scottsville in Scottsville, about 27 miles away. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Monroe County?

No statewide water test and no permit or fee for a household well. All work on a well, including plugging it, must be done by a Kentucky certified water well driller to the 401 KAR 6:310 construction standards (grouted casing, sanitary well cap, 50 ft from a septic tank and 70 ft from a drainfield), and the driller must file the well record with the Division of Water and give you a copy within 60 days. A few local health departments ask for a bacteria sample on a new well; lenders usually do.

What does a well test cost near Monroe County?

A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.