Maine county well guide

Well Water in Penobscot County, ME: Testing, Contractors and Rules

About 58,400 people in Penobscot County, 38% of residents, get their water from a private well. Nobody tests that water unless the owner does.

38%of residents on a private well
Share on private wells
Penobscot County38%
Maine38%
20licensed contractors serve the county
25 mito the nearest certified lab that takes homeowner samples, ClearWater Laboratory (a division of Acheron Engineering)
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.

The U.S. Geological Survey's 2010 estimate puts the number of Penobscot County residents on private wells at about 58,400, or 38%, close to the Maine figure of 38%. State well records list 4,874 domestic wells in the Maine Geological Survey well database drilled since 2000, with a median depth of 240 feet. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Penobscot County

The rules that apply in Penobscot County are set at the state level in Maine. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for a household well. The well must be drilled by a Maine licensed well drilling company using a licensed driller, to the Commission's construction rules (steel casing at least 20 ft, with at least 10 ft into bedrock recommended, a sanitary cap, and a well cap above grade), and sited under the Commission's setback rules (100 ft from a septic disposal field, 60 ft from a septic tank). The driller files a well completion report with the Maine Geological Survey. A few towns require a bacteria test before a certificate of occupancy, and some lenders do.

Water test when a home is soldNot required statewide

No statewide requirement. Maine's residential property disclosure form asks whether the water supply is a private well, when it was last tested and whether any test found a problem, so a recent test is expected in practice, and some lenders require a water test before closing.

What the state recommends

Maine CDC recommends testing a private well every year for coliform bacteria and nitrate, and every three to five years for arsenic, uranium, radon, fluoride and manganese, the five contaminants Maine's bedrock wells carry most often (about one in ten wells is over the arsenic standard, and radon in water is common). The standard Maine well water kit covers all of these plus lead, iron, hardness and pH. Test again after flooding, well work, hydrofracturing or a change in taste, color or smell.

Free or low-cost testingAvailable

No statewide free program. The state Health and Environmental Testing Laboratory in Augusta sells the standard well water kit through town offices, plumbing supply stores and by mail, with the bacteria, nitrate, arsenic, uranium, fluoride and metals panel, and Maine CDC explains the results. Several counties and tribal health programs run periodic free arsenic screening.

Getting your water tested near Penobscot County

The nearest certified lab that takes samples from homeowners is ClearWater Laboratory (a division of Acheron Engineering) in Newport, about 25 miles from the county's population center. 1 certified lab is within 40 miles in all. One of them says it takes samples from homeowners.

Licensed well contractors serving Penobscot County

Licensed help in Penobscot County includes Carmel Well Drilling Company LLC and Gallants Artesian Wells Inc and 18 others. Every listing was matched to the Maine license list; the "verify" link on each profile opens the state lookup.

Well depth and water chemistry

In state well records, the median household well in Penobscot County is 240 feet deep, and the middle half run 180 to 320 feet (4,874 domestic wells in the Maine Geological Survey well database drilled since 2000). Contaminants worth testing for in this part of Maine include arsenic, radon in water, uranium, and manganese and iron. A first full panel tells you which of them apply to your well.

Typical well depth
Median well240 ft
Most wells180 to 320 ft
Based on4,874 wells

Domestic wells in the Maine Geological Survey well database drilled since 2000. "Most wells" is the middle half.

Contaminants to test for
  • ArsenicNaturally occurring in bedrock across central and southern Maine, worst in the Augusta to Bangor corridor and the midcoast
  • Radon in waterGranitic bedrock statewide, especially the southwest
  • UraniumGranite in the same areas
  • Manganese and ironBedrock and overburden wells
  • FluorideLocally high in bedrock
  • Coliform bacteriaDug wells and older drilled wells
  • Hardness
  • Sodium and chlorideRoad salt near highways, saltwater along the coast
  • NitrateShallow wells in farm country, the Aroostook potato belt
  • PFASNear sludge-spread farmland in Fairfield and central Maine, and airfields

Neighboring counties: Piscataquis County, Waldo County, Hancock County, Somerset County.

Typical well costs: Maine lab fees and national price ranges

Bacteria test (coliform and E. coli)$27published Maine lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$127 to $147published Maine lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: Maine state lab (HETL) kits: $27 bacteria, $42 basic safety test, $127 to $147 standard well and home-sale tests. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Maine HETL test kit store, HomeGuide cost guides, Angi: cost to shock a well.

Questions Penobscot County well owners ask

How many people in Penobscot County use a private well?

The U.S. Geological Survey estimates about 58,400 people, 38% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 4,874 domestic wells in the Maine Geological Survey well database drilled since 2000.

Where is the closest certified lab to Penobscot County?

ClearWater Laboratory (a division of Acheron Engineering) in Newport, about 25 miles from the county's population center. It says it accepts samples from homeowners.

Do I need a permit to drill a well in Penobscot County?

No statewide water test and no state permit for a household well. The well must be drilled by a Maine licensed well drilling company using a licensed driller, to the Commission's construction rules (steel casing at least 20 ft, with at least 10 ft into bedrock recommended, a sanitary cap, and a well cap above grade), and sited under the Commission's setback rules (100 ft from a septic disposal field, 60 ft from a septic tank). The driller files a well completion report with the Maine Geological Survey. A few towns require a bacteria test before a certificate of occupancy, and some lenders do.

What does a well test cost near Penobscot County?

Published lab fees in Maine: $27 for a bacteria test (Maine HETL test kit store). Mail-in kits cost about the same as walking in.