Maryland county well guide

Well Water in Washington County, MD: Testing, Contractors and Rules

About 28,300 people in Washington County, 19% of residents, get their water from a private well. Nobody tests that water unless the owner does.

19%of residents on a private well
Share on private wells
Washington County19%
Maryland13%
9licensed contractors serve the county
12 mito the nearest certified lab that takes homeowner samples, Fredericktowne Labs, Inc
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

About 28,300 people in Washington County, 19% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is well above the Maryland figure of 13%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Washington County

Private wells in Washington County follow Maryland's statewide rules, administered by the Maryland Department of the Environment, Water Supply Program. A water test is required when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellRequired

Yes. A well construction permit from the county health department is required before drilling, the well must be built by a Maryland licensed well driller to COMAR 26.04.04 (grouted casing, 100 ft from a septic tank or drainfield, or 50 ft where the well draws from a confined aquifer, minimum yields by use), and before the house can be occupied the county issues a certificate of potability based on a sample from an MDE-certified lab that passes the county's potability tests, usually bacteria plus a chemical panel. Several counties add tests (Anne Arundel, for example, requires two consecutive passing bacteria tests, one chemical test, and radionuclide, arsenic and cadmium tests where applicable). The driller files the well completion report with the county.

Water test when a home is soldNot required statewide

No statewide requirement. Maryland's residential disclosure asks about the water supply and known problems, and a few counties require a bacteria test or a yield test when a property on a well changes hands (check the county health department). Some lenders require a water test before closing.

What the state recommends

University of Maryland Extension and MDE recommend testing a private well every year for coliform bacteria and nitrate, and every three years for pH, hardness, iron, manganese, lead, copper and total dissolved solids. Add arsenic and radium in the Coastal Plain (the Aquia and Patuxent aquifers under Anne Arundel, Calvert, Prince George's and the Eastern Shore), radon and uranium in the Piedmont, PFAS near Patuxent River, Fort Meade and other airfields, chloride and sodium on the lower Eastern Shore, and test again after flooding, well work or a change in taste, color or smell.

Free or low-cost testingAvailable

No free program. The county health departments do not run labs but will tell you which certified labs serve the county, and several commercial labs on the MDE list (Water Testing Labs of MD, Home Land Labs, Fredericktowne Labs, Certified Water Testing, Chesapeake Environmental) are built around homeowner samples and run the potability panel. University of Maryland Extension's Wells and Septic Systems program runs periodic free screening clinics.

Getting your water tested near Washington County

For a homeowner test, start with Fredericktowne Labs, Inc in Myersville (about 12 miles from the county's population center), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.

Licensed well contractors serving Washington County

9 licensed contractors list Washington County as a home base or service area, including Earth Data Incorporated and Geo-Technology Associates, Inc. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

We have no county-level well records for Washington County yet. Statewide, depth varies widely across the state: fractured crystalline rock in the Piedmont (Montgomery, Howard, Baltimore, Carroll and eastern Frederick counties), where yields are modest and a dry hole is possible; stacked sand aquifers in the Coastal Plain of the Eastern Shore and Southern Maryland; limestone and sandstone in the Hagerstown Valley and the western mountains. Logs of nearby wells, held by the county health department, are the best guide. Contaminants worth testing for in this part of Maryland include coliform bacteria, nitrate, arsenic, and radium. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteriaStatewide, worst in shallow and older wells
  • NitrateEastern Shore farm and poultry country, shallow Columbia aquifer wells
  • ArsenicAquia aquifer in Anne Arundel, Calvert, Prince George's and the upper Eastern Shore
  • RadiumPatuxent and Patapsco aquifers of Anne Arundel and Southern Maryland
  • Radon and uraniumPiedmont granite and gneiss
  • Acidic corrosive water that pulls lead and copper from plumbingPiedmont and Coastal Plain
  • Iron and manganeseCoastal Plain sands
  • HardnessHagerstown Valley limestone
  • Saltwater and sodiumLower Eastern Shore and Bay-front wells
  • PFAS near military airfields and industrial sites

Neighboring counties: Frederick County, Carroll County, Montgomery County, Howard County.

Typical well costs: Maryland lab fees and national price ranges

Bacteria test (coliform and E. coli)$41published Maryland lab fees
Nitrate test$18published Maryland lab fees
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: Maryland state lab fees; a county health department may add a collection fee ($50 in Frederick County). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Maryland Department of Health lab fees, Frederick County Health Department, HomeGuide cost guides, Angi: cost to shock a well.

Questions Washington County well owners ask

How many people in Washington County use a private well?

The U.S. Geological Survey estimates about 28,300 people, 19% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Washington County?

Fredericktowne Labs, Inc in Myersville, about 12 miles from the county's population center. It says it accepts samples from homeowners.

Do I need a permit to drill a well in Washington County?

Yes. A well construction permit from the county health department is required before drilling, the well must be built by a Maryland licensed well driller to COMAR 26.04.04 (grouted casing, 100 ft from a septic tank or drainfield, or 50 ft where the well draws from a confined aquifer, minimum yields by use), and before the house can be occupied the county issues a certificate of potability based on a sample from an MDE-certified lab that passes the county's potability tests, usually bacteria plus a chemical panel. Several counties add tests (Anne Arundel, for example, requires two consecutive passing bacteria tests, one chemical test, and radionuclide, arsenic and cadmium tests where applicable). The driller files the well completion report with the county.

What does a well test cost near Washington County?

Published lab fees in Maryland: $41 for a bacteria test and $18 for nitrate (Maryland Department of Health lab fees, Frederick County Health Department). Mail-in kits cost about the same as walking in.