Michigan county well guide

Well Water in Kent County, MI: Testing, Contractors and Rules

About 55,149 households in Kent County, 22% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
22%of households on a private well
Share on wells, county vs state
Kent County22%
Michigan average26%
20licensed contractors serve the county
4 mito the nearest certified lab, Prein & Newhof
Nostatewide test required when a home is sold

Kent County has an estimated 55,149 households on private wells, 22% of the county. If you are one of them, testing, treatment and repairs are yours to arrange.

Local rules for wells in Kent County

Michigan’s well construction code applies in Kent County, which means a permit from the local health department, an inspection, and a bacteria sample before use. Selling a home with a well may trigger a county point-of-sale program; the health department can confirm.

At a glance

Water test for a new wellRequired

Michigan requires new wells to be tested at installation under the well construction code (Part 127 of the Public Health Code). Local health departments issue the permit and require the sample.

Water test when a home is soldNot required statewide

No statewide requirement, but several counties run time-of-sale or point-of-sale well and septic evaluation programs. Check the county page.

What the state recommends

EGLE recommends testing for coliform bacteria, nitrate and nitrite, fluoride, chloride, sulfate, sodium, hardness, and metals including arsenic, lead, iron, manganese, copper, uranium and others. Bacteria and nitrate yearly; a full chemistry panel every few years or when water changes.

Free or low-cost testingAvailable

Eight county health departments run their own onsite labs (Washtenaw, Oakland, Kalamazoo, Saginaw, Luce, Mackinac, Alger, Schoolcraft). Residents elsewhere can order a mail-in test through the EGLE Drinking Water Laboratory.

Getting your water tested near Kent County

9 certified labs within 40 miles serve Kent County, starting with F & V Drinking Water Laboratory – Belding in Grand Rapids (in the county). Each card below shows whether the lab takes homeowner samples and which tests it is certified for.

8 certified labs within 40 miles

Prein & Newhof

MI certified

Grand Rapids, MI · Commercial4.1 mi

  • Arsenic
  • Coliform Bacteria
  • Full Homeowner Panel
  • Iron and Manganese
  • Lead
  • Nitrate / Nitrite
  • Uranium
  • Volatile Organic Compounds

Licensed well contractors serving Kent County

19 licensed contractors serve Kent County, including All-Flo Plumbing Llc and Bell Well Drilling, LLC. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

What comes up with the water depends on the aquifer. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Arsenic (southeast and thumb region)
  • Nitrate (agricultural areas)
  • Iron
  • Manganese
  • Hardness
  • Coliform bacteria
  • PFAS near known sites

Neighboring counties: Ottawa County, Allegan County, Barry County, Ionia County.

What well work costs in Kent County

Basic bacteria and nitrate test$25 to $75lab fee, homeowner sample
Full panel lab test$150 to $400metals, VOCs, radiologicals
Well inspection$250 to $550flow, pressure, visual, water test
Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job

National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.

Questions Kent County well owners ask

How many homes in Kent County are on a well?

About 55,149, or 22% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Kent County?

F & V Drinking Water Laboratory – Belding in Grand Rapids, inside the county. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Kent County?

Yes. The local health department issues the permit and inspects the well under the Michigan well construction code.

What does a well test cost near Kent County?

A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.