FT Guru’s Laboratory
- Coliform Bacteria
About 35,200 people in Macomb County, 4% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
Private wells serve a minority in Macomb County: about 35,200 people, 4% of residents, by the U.S. Geological Survey's 2010 estimate, one of the lowest shares in Michigan. If yours is one of them, testing and upkeep are up to you.
Michigan's well construction code applies in Macomb County, which means a permit from the local health department, an inspection, and a bacteria sample before use. Selling a home with a well may trigger a county point-of-sale program; the health department can confirm.
Michigan requires new wells to be tested at installation under the well construction code (Part 127 of the Public Health Code). Local health departments issue the permit and require the sample.
No statewide requirement, but several counties run time-of-sale or point-of-sale well and septic evaluation programs. Check the county page.
EGLE recommends testing for coliform bacteria, nitrate and nitrite, fluoride, chloride, sulfate, sodium, hardness, and metals including arsenic, lead, iron, manganese, copper, uranium and others. Bacteria and nitrate yearly; a full chemistry panel every few years or when water changes.
Eight county health departments run their own onsite labs (Washtenaw, Oakland, Kalamazoo, Saginaw, Luce, Mackinac, Alger, Schoolcraft). Residents elsewhere can order a mail-in test through the EGLE Drinking Water Laboratory.
15 certified labs are within 40 miles of Macomb County, the closest being FT Guru’s Laboratory in Clinton Township (about 4 miles from the county's population center). None of them lists homeowner samples, so call first or use a mail-in kit from a state-certified lab.
15 certified labs within 40 miles of this county
Licensed help in Macomb County includes Larry A John Wells & Repair and Reds Well Drilling Inc and 3 others. Every listing was matched to the Michigan license list; the "verify" link on each profile opens the state lookup.
5 licensed contractors
License 50-2535 Active
License 50-2142 Active
License 50-2268, 50-2722 Active
License 50-1719 Active
License 50-2337, 50-2338 Active
Depth varies across Macomb County. Logs of nearby wells, through the state well record search, are the best guide. Contaminants worth testing for in this part of Michigan include arsenic, nitrate, iron, and manganese. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Oakland County, Wayne County, St. Clair County, Lapeer County.
Lab fees: EGLE state lab from October 1, 2026 ($23 bacteria, $41 nitrate and nitrite, partial chemistry $66 plus $13 prep) and district health department labs ($25 each). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: EGLE fee schedule effective 10/1/2026, Central Michigan District Health Department lab, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 35,200 people, 4% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
FT Guru’s Laboratory in Clinton Township, about 4 miles from the county's population center. Call first to ask whether they accept homeowner samples.
Yes. The local health department issues the permit and inspects the well under the Michigan well construction code.
Published lab fees in Michigan: $23 to $25 for a bacteria test and $25 to $41 for nitrate (EGLE fee schedule effective 10/1/2026, Central Michigan District Health Department lab). Fees vary by lab, so ask when you order the kit.