Michigan county well guide

Well Water in Marquette County, MI: Testing, Contractors and Rules

About 7,970 households in Marquette County, 30% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
30%of households on a private well
Share on wells, county vs state
Marquette County30%
Michigan average26%
2licensed contractors serve the county
40+ mito a certified lab; mail-in kits recommended
Nostatewide test required when a home is sold

Marquette County has an estimated 7,970 households on private wells, 30% of the county. If you are one of them, testing, treatment and repairs are yours to arrange.

Local rules for wells in Marquette County

Michigan’s well construction code applies in Marquette County, which means a permit from the local health department, an inspection, and a bacteria sample before use. Selling a home with a well may trigger a county point-of-sale program; the health department can confirm.

At a glance

Water test for a new wellRequired

Michigan requires new wells to be tested at installation under the well construction code (Part 127 of the Public Health Code). Local health departments issue the permit and require the sample.

Water test when a home is soldNot required statewide

No statewide requirement, but several counties run time-of-sale or point-of-sale well and septic evaluation programs. Check the county page.

What the state recommends

EGLE recommends testing for coliform bacteria, nitrate and nitrite, fluoride, chloride, sulfate, sodium, hardness, and metals including arsenic, lead, iron, manganese, copper, uranium and others. Bacteria and nitrate yearly; a full chemistry panel every few years or when water changes.

Free or low-cost testingAvailable

Eight county health departments run their own onsite labs (Washtenaw, Oakland, Kalamazoo, Saginaw, Luce, Mackinac, Alger, Schoolcraft). Residents elsewhere can order a mail-in test through the EGLE Drinking Water Laboratory.

Getting your water tested near Marquette County

No state-certified lab sits within 40 miles of the center of Marquette County. That is common in rural Michigan, and the practical answer is a mail-in kit: the lab ships bottles, you sample at the kitchen tap and ship them back cold. The finder below widens the search to the whole state.

No listings yet for this area. Try widening your search.

Licensed well contractors serving Marquette County

2 licensed contractors serve Marquette County, including Hakala Well & Pump Service LLC and Larrys Well and Pump Service. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

What comes up with the water depends on the aquifer. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Arsenic (southeast and thumb region)
  • Nitrate (agricultural areas)
  • Iron
  • Manganese
  • Hardness
  • Coliform bacteria
  • PFAS near known sites

Neighboring counties: Alger County, Delta County, Dickinson County, Baraga County.

What well work costs in Marquette County

Basic bacteria and nitrate test$25 to $75lab fee, homeowner sample
Full panel lab test$150 to $400metals, VOCs, radiologicals
Well inspection$250 to $550flow, pressure, visual, water test
Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job

National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.

Questions Marquette County well owners ask

How many homes in Marquette County are on a well?

About 7,970, or 30% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Marquette County?

There is no certified lab within 40 miles. Use a mail-in kit from a Michigan certified lab, or the county health department if it collects samples.

Do I need a permit to drill a well in Marquette County?

Yes. The local health department issues the permit and inspects the well under the Michigan well construction code.

What does a well test cost near Marquette County?

A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.