Well Water in Adair County, MO: Testing, Contractors and Rules
About 6 households in Adair County, 0% of the county, rely on a private well. Nobody tests that water unless the owner does.
Wells are the exception in Adair County: about 6 households, under 1% of the county, are on a private well. Being in the minority means less local help, so this page gathers what applies.
Local rules for wells in Adair County
The rules that apply in Adair County are set at the state level in Missouri. New wells must be tested before use, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
At a glance
No permit for the owner, but the well must be built by a Missouri permitted well installation contractor to the 10 CSR 23-3 standards for its drilling area (Missouri has 13 drilling areas with different minimum casing depths, grouted casing, 50 ft from a septic tank and 100 ft from a lagoon or drainfield), and the contractor must disinfect the well, take a water sample for bacteria after construction and file a well certification report with the Missouri Geological Survey within 60 days. The State Public Health Laboratory's New Well Series (pH, fluoride, chloride, nitrate, sulfate, iron, manganese and lead) is the usual chemistry check on a new well.
No statewide requirement. The Missouri seller's disclosure asks only whether the water supply is a private well and whether the seller knows of problems. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing.
The Department of Health and Senior Services recommends testing a private well every year for coliform bacteria, and every few years for nitrate, pH, hardness, iron, manganese, lead and copper (the State Public Health Laboratory's minerals, nutrients and metals panel covers all of these plus arsenic and uranium). Add radon and radium in the Ozarks, lead and cadmium in the Old Lead Belt and Viburnum Trend mining districts, sulfate and chloride in deep northern wells, pesticides in shallow Bootheel wells, and test again after flooding, well work or a change in taste, color or smell. Karst wells and springs in the Ozarks should be retested after heavy rain.
No free program, but the cheapest state lab in the country: the State Public Health Laboratory tests a private well or cistern sample for total coliform and E. coli for a $10 handling fee. Pick up the kit from your local public health agency or district health office, collect the sample and hand it back for the lab's free statewide overnight courier. Chemistry panels cost more and are ordered through the same agency or the Bureau of Environmental Epidemiology (573-751-6102).
Getting your water tested near Adair County
Adair County has no certified lab within 40 miles, so most owners here test by mail. Order bottles from a certified lab, sample from the cold tap before any treatment, and ship the same day with an ice pack.
No listings yet for this area. Try widening your search.
Licensed well contractors serving Adair County
No licensed contractor lists Adair County as a home base or service area yet. The finder below searches the whole state; most drillers travel several counties for a job.
No listings yet for this area. Try widening your search.
Well depth and water chemistry
Well depth and water chemistry in Adair County follow the rock underneath it. Typical wells here run 300 to 800 ft in the Ozark dolomite of southern and central Missouri, the deepest domestic wells in the Midwest; 400 to 700 ft around St. Louis and in the counties along the Missouri River; 100 to 300 ft on the Springfield Plateau; 30 to 100 ft in the glacial till of northern Missouri, where yields are small and water is poor enough that most homes are on rural water districts; 60 to 200 ft in the alluvium of the Bootheel and the Missouri River bottoms. Contaminants worth testing for in this part of Missouri include coliform bacteria (the most common failure statewide, worst in ozark karst wells and springs after rain), nitrate (shallow wells in farm country, the bootheel and northern missouri).
Varies by location. Check the state well record search for logs of nearby wells.
- Coliform bacteria (the most common failure statewide
- Worst in Ozark karst wells and springs after rain)
- Nitrate (shallow wells in farm country
- The Bootheel and northern Missouri)
- Hardness (dolomite across the Ozarks)
- Iron and manganese (glacial till
- Alluvium and Bootheel sands)
- Radon and radium (locally in the Ozark aquifer)
- Lead
- Cadmium and zinc (Old Lead Belt
- Viburnum Trend and Tri-State mining districts)
- Sulfate
- Chloride and sodium (deep bedrock wells in northern and western Missouri)
- Arsenic (locally)
- Pesticides (shallow Bootheel and river-bottom wells)
- PFAS near airfields and industrial sites
Neighboring counties: Schuyler County, Knox County, Macon County, Sullivan County.
What well work costs in Adair County
National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.
Questions Adair County well owners ask
How many homes in Adair County are on a well?
About 6, or 0% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.
Where is the closest certified lab to Adair County?
There is no certified lab within 40 miles. Use a mail-in kit from a Missouri certified lab, or the county health department if it collects samples.
Do I need a permit to drill a well in Adair County?
No permit for the owner, but the well must be built by a Missouri permitted well installation contractor to the 10 CSR 23-3 standards for its drilling area (Missouri has 13 drilling areas with different minimum casing depths, grouted casing, 50 ft from a septic tank and 100 ft from a lagoon or drainfield), and the contractor must disinfect the well, take a water sample for bacteria after construction and file a well certification report with the Missouri Geological Survey within 60 days. The State Public Health Laboratory's New Well Series (pH, fluoride, chloride, nitrate, sulfate, iron, manganese and lead) is the usual chemistry check on a new well.
What does a well test cost near Adair County?
A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.