BMD Services
License NYRD11090 Active
- Well Drilling
- Well Repair
About 5,060 households in Franklin County, 25% of the county, rely on a private well. Nobody tests that water unless the owner does.
About one in 4 households in Franklin County relies on a private well, around 5,060 homes. Outside the towns with public water, wells are the norm here.
The rules that apply in Franklin County are set at the state level in New York. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
No single statewide rule. The driller must be DEC-registered, file a preliminary notice before drilling, disinfect the finished well under NYSDOH Appendix 5-B, and send a well completion report to DEC and to you within 30 days. NYSDOH says a new well should be tested before use for coliform bacteria, nitrate, nitrite, arsenic, lead, iron, manganese, sodium, hardness, pH and turbidity. Many county health departments (Westchester, Rockland, Putnam, Dutchess, Suffolk and others) require a permit and a passing water test before a new well can be used.
No statewide requirement. A few counties and towns require a well test or well inspection when a property changes hands, and FHA, VA and USDA loans usually ask for a bacteria and nitrate test. Check with the county health department.
NYSDOH recommends a coliform bacteria test every year, plus a first-time panel of nitrate, nitrite, arsenic, lead, iron, manganese, sodium, sulfate, hardness, pH, alkalinity and turbidity, then periodic re-testing of whatever showed up. Add radon, uranium, methane or PFAS where they are known in your area.
No statewide free program. Several county health departments run their own ELAP-certified labs and sell low-cost bacteria and nitrate tests (Erie, Monroe, Suffolk, Nassau, Cattaraugus, Chautauqua, Allegany). Others keep a list of local certified labs.
Franklin County has no certified lab within 40 miles, so most owners here test by mail. Order bottles from a certified lab, sample from the cold tap before any treatment, and ship the same day with an ice pack.
No listings yet for this area. Try widening your search.
Licensed help in Franklin County includes BMD Services and Chevalier Drilling Co., Inc and 9 others. Every listing was matched to the New York license list; the "verify" link on each profile opens the state lookup.
11 licensed contractors
License NYRD11090 Active
License NYRD10037 Active
License 4625 Active
License NYRD10233 Active
License NYRD10339 Active
License NYRD11106 Active
License 4492 Active
License NYRD01743 Active
License NYRD11113 Active
License 3185 Active
License NYRD10045 Active
Well depth and water chemistry in Franklin County follow the rock underneath it. Typical wells here run 100 to 400 ft in bedrock across most of upstate; 30 to 150 ft in glacial sand and gravel valleys and on Long Island feet. Contaminants worth testing for in this part of New York include coliform bacteria, nitrate (farm valleys and older septic areas), arsenic (parts of central and western new york), iron and manganese.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Clinton County, St. Lawrence County, Essex County, Hamilton County.
National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.
About 5,060, or 25% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.
There is no certified lab within 40 miles. Use a mail-in kit from a New York certified lab, or the county health department if it collects samples.
No single statewide rule. The driller must be DEC-registered, file a preliminary notice before drilling, disinfect the finished well under NYSDOH Appendix 5-B, and send a well completion report to DEC and to you within 30 days. NYSDOH says a new well should be tested before use for coliform bacteria, nitrate, nitrite, arsenic, lead, iron, manganese, sodium, hardness, pH and turbidity. Many county health departments (Westchester, Rockland, Putnam, Dutchess, Suffolk and others) require a permit and a passing water test before a new well can be used.
A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.