New York county well guide

Well Water in Fulton County, NY: Testing, Contractors and Rules

About 20,500 people in Fulton County, 37% of residents, get their water from a private well. Nobody tests that water unless the owner does.

37%of residents on a private well
Share on private wells
Fulton County37%
New York10%
8licensed contractors serve the county
25 mito the nearest certified lab, Pace Analytical Services, LLC-Ballston Spa. Call first: it may not take homeowner samples
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

About 20,500 people in Fulton County, 37% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is well above the New York figure of 10%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Fulton County

Private wells in Fulton County follow New York's statewide rules, administered by the NYS Department of Environmental Conservation. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No single statewide rule. The driller must be DEC-registered, file a preliminary notice before drilling, disinfect the finished well under NYSDOH Appendix 5-B, and send a well completion report to DEC and to you when the well is done. NYSDOH says a new well should be tested before use for coliform bacteria, nitrate, nitrite, arsenic, lead, iron, manganese, sodium, hardness, pH and turbidity. Some county health departments require a permit and a passing water test before a new well can be used.

Water test when a home is soldNot required statewide

No statewide requirement. A few counties and towns require a well test or well inspection when a property changes hands, and some lenders ask for a bacteria and nitrate test. Check with the county health department.

What the state recommends

NYSDOH recommends a coliform bacteria test every year, plus a first-time panel of nitrate, nitrite, arsenic, lead, iron, manganese, sodium, sulfate, hardness, pH, alkalinity and turbidity, then periodic re-testing of whatever showed up. Add radon, uranium, methane or PFAS where they are known in your area.

Free or low-cost testingAvailable

No statewide free program. Several county health departments run their own ELAP-certified labs and sell low-cost bacteria and nitrate tests (Erie, Monroe, Suffolk, Nassau, Cattaraugus, Chautauqua, Allegany). Others keep a list of local certified labs.

Getting your water tested near Fulton County

4 certified labs are within 40 miles of Fulton County, the closest being Pace Analytical Services, LLC-Ballston Spa in Ballston Spa (about 25 miles from the county's population center). None of them lists homeowner samples, so call first or use a mail-in kit from a state-certified lab.

Licensed well contractors serving Fulton County

8 licensed contractors list Fulton County as a home base or service area, including Adirondack Mechanical Corp and Keyser/Claverack Well & Pump Serv, LLC. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

We have no county-level well records for Fulton County yet. Statewide, depth varies widely across the state, from wells in glacial sand and gravel valleys and on Long Island to deep bedrock wells upstate; logs of nearby wells are the best guide. Contaminants worth testing for in this part of New York include coliform bacteria, nitrate, arsenic, and iron and manganese. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteria
  • NitrateFarm valleys and older septic areas
  • ArsenicParts of central and western New York
  • Iron and manganese
  • HardnessLimestone country
  • Sodium and chlorideRoad salt
  • Sulfate and hydrogen sulfideShale areas
  • Radon and uraniumSouthern Tier and Adirondack bedrock
  • MethaneSouthern Tier shale
  • PFASHoosick Falls, Newburgh and other hot spots
  • Barium and fluorideWestern New York

Neighboring counties: Montgomery County, Schenectady County, Saratoga County, Schoharie County.

Typical well costs: New York lab fees and national price ranges

Bacteria test (coliform and E. coli)$32published New York lab fees
Nitrate test$80published New York lab fees
Broad panel (metals and minerals)$384 to $583published New York lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: Westchester County lab fees ($32.10 bacteria, $80.25 nitrate, well packages $383.51 and $583.10). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Westchester County lab fee schedule, HomeGuide cost guides, Angi: cost to shock a well.

Questions Fulton County well owners ask

How many people in Fulton County use a private well?

The U.S. Geological Survey estimates about 20,500 people, 37% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Fulton County?

Pace Analytical Services, LLC-Ballston Spa in Ballston Spa, about 25 miles from the county's population center. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Fulton County?

No single statewide rule. The driller must be DEC-registered, file a preliminary notice before drilling, disinfect the finished well under NYSDOH Appendix 5-B, and send a well completion report to DEC and to you when the well is done. NYSDOH says a new well should be tested before use for coliform bacteria, nitrate, nitrite, arsenic, lead, iron, manganese, sodium, hardness, pH and turbidity. Some county health departments require a permit and a passing water test before a new well can be used.

What does a well test cost near Fulton County?

Published lab fees in New York: $32 for a bacteria test and $80 for nitrate (Westchester County lab fee schedule). Mail-in kits cost about the same as walking in.