K & W Laboratories, LLC
NC certified
- Coliform Bacteria
- Hardness
- Nitrate / Nitrite
North Carolina county well guide
Well Water in Anson County, NC: Testing, Contractors and Rules
About 3,447 households in Anson County, 34% of the county, rely on a private well. Nobody tests that water unless the owner does.
of households on a private well
Share on wells, county vs state
0licensed contractors serve the county
33 mito the nearest certified lab, K & W Laboratories, LLC
Nostatewide test required when a home is sold
About one in 3 households in Anson County relies on a private well, around 3,447 homes. Outside the towns with public water, wells are the norm here.
Local rules for wells in Anson County
In North Carolina the county is the front door: Anson County Environmental Health permits the well, requires the 30-day test on a new well, and will collect a sample for the State Laboratory of Public Health for a county fee. The state’s testing schedule is in the cards below.
At a glance
Water test for a new wellRequired
Every newly constructed private well must be tested within 30 days of completion by the State Laboratory of Public Health or a certified lab before it is used for drinking water.
Water test when a home is soldNot required statewide
No statewide requirement at sale. Lenders (FHA, VA, USDA) usually require a test.
What the state recommends
Every year: total and fecal coliform bacteria plus a wellhead inspection. Every 2 years: heavy metals, nitrate and nitrite, lead and copper. Every 5 years: pesticides and volatile organic compounds. Retest after repairs, flooding, a change in water quality, or when an infant or pregnant person is in the home.
Free or low-cost testingAvailable
County health departments collect samples and send them to the State Laboratory of Public Health at set fees that vary by county (often $30 to $100 per panel).
Getting your water tested near Anson County
Anson County has no certified lab within 40 miles, so most owners here test by mail. Order bottles from a certified lab, sample from the cold tap before any treatment, and ship the same day with an ice pack.
1 certified labs within 40 miles
Licensed well contractors serving Anson County
No licensed contractor lists Anson County as a home base or service area yet. The finder below searches the whole state; most drillers travel several counties for a job.
No listings yet for this area. Try widening your search.
Well depth and water chemistry
Well depth and water chemistry in Anson County follow the rock underneath it. Depth varies across the county; the state well record search shows logs for nearby wells.
Typical well depth
Varies by location. Check the state well record search for logs of nearby wells.
Contaminants to test for
- Lead
- Arsenic
- Iron
- Manganese
- Low pH (corrosive water)
- Coliform bacteria
- Radon
Neighboring counties: Richmond County, Stanly County, Union County, Montgomery County.
What well work costs in Anson County
Basic bacteria and nitrate test$25 to $75lab fee, homeowner sample
Full panel lab test$150 to $400metals, VOCs, radiologicals
Well inspection$250 to $550flow, pressure, visual, water test
Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job
National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.
Questions Anson County well owners ask
How many homes in Anson County are on a well?
About 3,447, or 34% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.
Where is the closest certified lab to Anson County?
There is no certified lab within 40 miles. Use a mail-in kit from a North Carolina certified lab, or the county health department if it collects samples.
Do I need a permit to drill a well in Anson County?
Yes. County Environmental Health issues the permit, and the new well must be tested within 30 days of completion.
What does a well test cost near Anson County?
A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. County-collected samples sent to the State Laboratory are often cheaper.