North Carolina county well guide

Well Water in Currituck County, NC: Testing, Contractors and Rules

About 10,500 people in Currituck County, 44% of residents, get their water from a private well. Nobody tests that water unless the owner does.

44%of residents on a private well
Share on private wells
Currituck County44%
North Carolina23%
5licensed contractors serve the county
30 mito the nearest certified lab, Jennings-Thompson Laboratories, Inc.. Call first: it may not take homeowner samples
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

About 10,500 people in Currituck County, 44% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is well above the North Carolina figure of 23%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Currituck County

Currituck County Environmental Health issues well permits and, under North Carolina law, every new well must be tested within 30 days of completion before it is used for drinking. The county office also collects samples for the State Laboratory for a set fee, which is usually the cheapest route for a routine test.

At a glance

Water test for a new wellRequired

Every newly constructed private well must be tested within 30 days of completion by the State Laboratory of Public Health or a certified lab before it is used for drinking water.

Water test when a home is soldNot required statewide

No statewide requirement at sale. Some lenders require a test.

What the state recommends

Every year: total and fecal coliform bacteria plus a wellhead inspection. Every 2 years: heavy metals, nitrate and nitrite, lead and copper. Every 5 years: pesticides and volatile organic compounds. Retest after repairs, flooding, a change in water quality, or when an infant or pregnant person is in the home.

Free or low-cost testingAvailable

County health departments collect samples and send them to the State Laboratory of Public Health at set fees that vary by county.

Getting your water tested near Currituck County

3 certified labs are within 40 miles of Currituck County, the closest being Jennings-Thompson Laboratories, Inc. in Virginia Beach (about 30 miles from the county's population center). None of them lists homeowner samples, so call first or use a mail-in kit from a state-certified lab.

Licensed well contractors serving Currituck County

5 licensed contractors list Currituck County as a home base or service area, including J. P. Enterprise and Ronnie E Keeter. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

Depth varies across Currituck County. Logs of nearby wells, through the state well record search, are the best guide. Contaminants worth testing for in this part of North Carolina include lead, arsenic, iron, and manganese. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Lead
  • Arsenic
  • Iron
  • Manganese
  • Low pHCorrosive water
  • Coliform bacteria
  • Radon

Neighboring counties: Camden County, Pasquotank County, Perquimans County, Gates County.

Typical well costs: North Carolina lab fees and national price ranges

Bacteria test (coliform and E. coli)$75published North Carolina lab fees
Nitrate test$75published North Carolina lab fees
Broad panel (metals and minerals)$175published North Carolina lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: County health departments set their own fees: $75 per kit in Moore County; $175 first-timer package in Wake County, plus a $50 trip fee if staff collect. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Moore County fee schedule, Wake County well water testing, HomeGuide cost guides, Angi: cost to shock a well.

Questions Currituck County well owners ask

How many people in Currituck County use a private well?

The U.S. Geological Survey estimates about 10,500 people, 44% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Currituck County?

Jennings-Thompson Laboratories, Inc. in Virginia Beach, about 30 miles from the county's population center. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Currituck County?

Yes. County Environmental Health issues the permit, and the new well must be tested within 30 days of completion.

What does a well test cost near Currituck County?

Published lab fees in North Carolina: $75 for a bacteria test and $75 for nitrate (Moore County fee schedule, Wake County well water testing). County-collected samples sent to the State Laboratory are often cheaper.