North Carolina county well guide

Well Water in Granville County, NC: Testing, Contractors and Rules

About 25,800 people in Granville County, 43% of residents, get their water from a private well. Nobody tests that water unless the owner does.

43%of residents on a private well
Share on private wells
Granville County43%
North Carolina23%
10licensed contractors serve the county
21 mito the nearest certified lab that takes homeowner samples, RTI International
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

About 25,800 people in Granville County, 43% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is well above the North Carolina figure of 23%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Granville County

Granville County Environmental Health issues well permits and, under North Carolina law, every new well must be tested within 30 days of completion before it is used for drinking. The county office also collects samples for the State Laboratory for a set fee, which is usually the cheapest route for a routine test.

At a glance

Water test for a new wellRequired

Every newly constructed private well must be tested within 30 days of completion by the State Laboratory of Public Health or a certified lab before it is used for drinking water.

Water test when a home is soldNot required statewide

No statewide requirement at sale. Some lenders require a test.

What the state recommends

Every year: total and fecal coliform bacteria plus a wellhead inspection. Every 2 years: heavy metals, nitrate and nitrite, lead and copper. Every 5 years: pesticides and volatile organic compounds. Retest after repairs, flooding, a change in water quality, or when an infant or pregnant person is in the home.

Free or low-cost testingAvailable

County health departments collect samples and send them to the State Laboratory of Public Health at set fees that vary by county.

Getting your water tested near Granville County

For a homeowner test, start with RTI International in Durham (about 21 miles from the county's population center), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.

Licensed well contractors serving Granville County

10 licensed contractors list Granville County as a home base or service area, including Breedlove Construction Inc and Clear Water Well Drilling, LLC. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

Depth varies across Granville County. Logs of nearby wells, through the state well record search, are the best guide. Contaminants worth testing for in this part of North Carolina include lead, arsenic, iron, and manganese. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Lead
  • Arsenic
  • Iron
  • Manganese
  • Low pHCorrosive water
  • Coliform bacteria
  • Radon

Neighboring counties: Vance County, Franklin County, Person County, Durham County.

Typical well costs: North Carolina lab fees and national price ranges

Bacteria test (coliform and E. coli)$75published North Carolina lab fees
Nitrate test$75published North Carolina lab fees
Broad panel (metals and minerals)$175published North Carolina lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: County health departments set their own fees: $75 per kit in Moore County; $175 first-timer package in Wake County, plus a $50 trip fee if staff collect. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Moore County fee schedule, Wake County well water testing, HomeGuide cost guides, Angi: cost to shock a well.

Questions Granville County well owners ask

How many people in Granville County use a private well?

The U.S. Geological Survey estimates about 25,800 people, 43% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Granville County?

RTI International in Durham, about 21 miles from the county's population center. It says it accepts samples from homeowners.

Do I need a permit to drill a well in Granville County?

Yes. County Environmental Health issues the permit, and the new well must be tested within 30 days of completion.

What does a well test cost near Granville County?

Published lab fees in North Carolina: $75 for a bacteria test and $75 for nitrate (Moore County fee schedule, Wake County well water testing). County-collected samples sent to the State Laboratory are often cheaper.