Ohio county well guide

Well Water in Licking County, OH: Testing, Contractors and Rules

About 50,500 people in Licking County, 30% of residents, get their water from a private well. Nobody tests that water unless the owner does.

30%of residents on a private well
Share on private wells
Licking County30%
Ohio16%
13licensed contractors serve the county
15 mito the nearest certified lab, Ohio Department of Agriculture Consumer Protection Laboratory. Call first: it may not take homeowner samples
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

The U.S. Geological Survey's 2010 estimate puts the number of Licking County residents on private wells at about 50,500, or 30%, well above the Ohio figure of 16%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Licking County

The rules that apply in Licking County are set at the state level in Ohio. New wells must be tested before use, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellRequired

Under OAC 3701-28 a permit from the local health district is required before a well is drilled or altered. When the work is done, the owner asks the health district for the final inspection, and a sanitarian collects the water sample: total coliform and E. coli, and the district may also check nitrate. The system is approved only when the sample passes (4 or fewer total coliform per 100 mL and no E. coli for a well without continuous disinfection).

Water test when a home is soldNot required statewide

No statewide requirement. Most local health districts offer a real-estate evaluation of the well on request (a visual inspection plus a bacteria and nitrate sample), and some lenders ask for one. Ask the county health district for its fee and turnaround.

What the state recommends

ODH recommends a total coliform and nitrate test every year, and every time the water changes in taste, color or smell, after flooding, or after any work on the well or pump. Add arsenic, iron and manganese, hardness and sulfate at least once, and PFAS or methane where local conditions call for it.

Free or low-cost testingAvailable

No statewide free program. Several county health districts run their own labs (Erie, Logan, Mahoning, Canton City among them) and sell bacteria and nitrate tests at cost; others sell bottles from a certified lab. OSU Extension fact sheet AEX-315 lists labs that accept samples from homeowners.

Getting your water tested near Licking County

5 certified labs are within 40 miles of Licking County, the closest being Ohio Department of Agriculture Consumer Protection Laboratory in Reynoldsburg (about 15 miles from the county's population center). None of them lists homeowner samples, so call first or use a mail-in kit from a state-certified lab.

Licensed well contractors serving Licking County

Licensed help in Licking County includes A&H Bevard Waterwell Drilling and B Mowrey Drilling, LLC and 11 others. Every listing was matched to the Ohio license list; the "verify" link on each profile opens the state lookup.

Well depth and water chemistry

We have no county-level well records for Licking County yet. Statewide, depth varies widely across the state, from wells in glacial sand and gravel in the northwest and central counties to bedrock wells in the east and south; logs of nearby wells are the best guide. Contaminants worth testing for in this part of Ohio include coliform bacteria, nitrate, arsenic, and iron. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteria
  • NitrateNorthwest and central farm counties
  • ArsenicGlacial aquifers in northwest and central Ohio
  • Iron
  • Manganese
  • Hardness
  • Sulfate and hydrogen sulfideEastern shale and coal country
  • Radium and uraniumSome sandstone and shale wells
  • MethaneNear oil and gas fields

Neighboring counties: Fairfield County, Knox County, Perry County, Franklin County.

Typical well costs: Ohio lab fees and national price ranges

Bacteria test (coliform and E. coli)$45 to $75published Ohio lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: County health department bacteria test: $45 if you collect, $75 if a sanitarian collects (Wayne County). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Wayne County Health Department, HomeGuide cost guides, Angi: cost to shock a well.

Questions Licking County well owners ask

How many people in Licking County use a private well?

The U.S. Geological Survey estimates about 50,500 people, 30% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Licking County?

Ohio Department of Agriculture Consumer Protection Laboratory in Reynoldsburg, about 15 miles from the county's population center. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Licking County?

Under OAC 3701-28 a permit from the local health district is required before a well is drilled or altered. When the work is done, the owner asks the health district for the final inspection, and a sanitarian collects the water sample: total coliform and E. coli, and the district may also check nitrate. The system is approved only when the sample passes (4 or fewer total coliform per 100 mL and no E. coli for a well without continuous disinfection).

What does a well test cost near Licking County?

Published lab fees in Ohio: $45 to $75 for a bacteria test (Wayne County Health Department). Mail-in kits cost about the same as walking in.