Pacific County DCD WQ Laboratory
Homeowner samples
- Coliform Bacteria
About 1,700 people in Clatsop County, 5% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.
Most of Clatsop County is on public water, but a 2010 U.S. Geological Survey estimate counts about 1,700 residents (5%) on private wells, below the Oregon figure of 14%. State well records list 303 new domestic wells reported to OWRD since 2000, with a median depth of 100 feet. If yours is one of them, testing and upkeep are up to you.
Private wells in Clatsop County follow Oregon's statewide rules, administered by the Oregon Water Resources Department, Well Construction and Compliance Section. No water test is required by the state when a new well is completed. A test is also required when a home with a well is sold. The cards below show the details and the official sources.
No statewide water test on a new well. The well must be built by an OWRD-licensed, bonded water supply well constructor (or by the landowner under a Landowner's Water Well Permit) to the OAR 690-210 standards, with a start card filed and the fee paid before drilling, a metal well ID tag attached, and a well report filed with OWRD within 30 days. Setbacks are 50 ft from a septic tank and 100 ft from a drainfield. Some counties ask for a bacteria test before a building permit is finaled, and some lenders do.
Yes. Oregon's Domestic Well Testing Act (ORS 448.271, OAR 333-061-0305 to 0335) requires the seller of a property with a domestic well to have the water tested by an ORELAP-accredited lab for arsenic, nitrate and total coliform bacteria, give the results to the buyer and report them to the Oregon Health Authority within 90 days of the sale. It is one of only a handful of state laws in the country that require a private well test at transfer.
The Oregon Health Authority recommends testing a domestic well every year for coliform bacteria and nitrate, and every three to five years for arsenic (found across the Willamette Valley, the Tualatin basin, Lane County and Klamath and Lake counties), plus pH, hardness, iron, manganese, lead and copper once. Add uranium and radon in Lane County and the Cascade foothills, and test again after flooding, well work or a change in taste, color or smell. In the Southern Willamette Valley and Lower Umatilla Basin Groundwater Management Areas, nitrate is the test that matters most.
No statewide free program. The OSU Extension Well Water Program runs free nitrate screening clinics around the state and publishes testing guidance, and Oregon Health Authority's Domestic Well Safety Program (971-673-0440) helps owners read results. The Lower Umatilla Basin (Morrow and Umatilla counties) has state-funded free nitrate testing and water delivery for affected wells. Otherwise OHA puts bacteria and nitrate tests at about $20 to $40 each and arsenic at $25 to $45.
For a homeowner test, start with Pacific County DCD WQ Laboratory in South Bend (about 39 miles from the county's population center), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.
1 certified labs within 40 miles of this county
Homeowner samples
10 licensed contractors list Clatsop County as a home base or service area, including A J Gaunt and Son and Alpine Resources. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.
10 licensed contractors
License 1538 Active
License 2017, 2036, 2054, 2071, 2023 Active
License 1646 Active
License 2043, 2048 Active
License 1917, 1920 Active
License 1430 Active
License 999999 Active
License 1975 Active
License 1480 Active
License 2046, 10699, 2108 Active
In state well records, the median household well in Clatsop County is 100 feet deep, and the middle half run 60 to 140 feet (303 new domestic wells reported to OWRD since 2000). Contaminants worth testing for in this part of Oregon include arsenic, nitrate, coliform bacteria, and iron and manganese. A first full panel tells you which of them apply to your well.
New domestic wells reported to OWRD since 2000. "Most wells" is the middle half.
Neighboring counties: Tillamook County, Columbia County, Washington County, Yamhill County.
Lab fees: Oregon Health Authority estimates; arsenic runs $25 to $45. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Oregon Health Authority testing recommendations, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 1,700 people, 5% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 303 new domestic wells reported to OWRD since 2000.
Pacific County DCD WQ Laboratory in South Bend, about 39 miles from the county's population center. It says it accepts samples from homeowners.
No statewide water test on a new well. The well must be built by an OWRD-licensed, bonded water supply well constructor (or by the landowner under a Landowner's Water Well Permit) to the OAR 690-210 standards, with a start card filed and the fee paid before drilling, a metal well ID tag attached, and a well report filed with OWRD within 30 days. Setbacks are 50 ft from a septic tank and 100 ft from a drainfield. Some counties ask for a bacteria test before a building permit is finaled, and some lenders do.
Published lab fees in Oregon: $20 to $40 for a bacteria test and $20 to $40 for nitrate (Oregon Health Authority testing recommendations). Mail-in kits cost about the same as walking in.