Oregon county well guide

Well Water in Multnomah County, OR: Testing, Contractors and Rules

Most of Multnomah County is on public water. About 7,100 residents, under 1%, rely on a private well, and testing it is up to them.

7,100people on private wells, under 1% of the county
359household wells in state records since 2000
24licensed contractors serve the county
4 mito the nearest certified lab that takes homeowner samples, Columbia Laboratories Inc.
Yesstatewide test required when a home is sold

Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.

Private wells are rare in Multnomah County. The U.S. Geological Survey's 2010 estimate is about 7,100 people, under 1% of residents, against 14% across Oregon. State well records list 359 new domestic wells reported to OWRD since 2000, with a median depth of 240 feet. If yours is one of them, testing and upkeep are up to you.

Local rules for wells in Multnomah County

The rules that apply in Multnomah County are set at the state level in Oregon. The state does not require a test on a new well, and a test is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellNot required statewide

No statewide water test on a new well. The well must be built by an OWRD-licensed, bonded water supply well constructor (or by the landowner under a Landowner's Water Well Permit) to the OAR 690-210 standards, with a start card filed and the fee paid before drilling, a metal well ID tag attached, and a well report filed with OWRD within 30 days. Setbacks are 50 ft from a septic tank and 100 ft from a drainfield. Some counties ask for a bacteria test before a building permit is finaled, and some lenders do.

Water test when a home is soldRequired

Yes. Oregon's Domestic Well Testing Act (ORS 448.271, OAR 333-061-0305 to 0335) requires the seller of a property with a domestic well to have the water tested by an ORELAP-accredited lab for arsenic, nitrate and total coliform bacteria, give the results to the buyer and report them to the Oregon Health Authority within 90 days of the sale. It is one of only a handful of state laws in the country that require a private well test at transfer.

What the state recommends

The Oregon Health Authority recommends testing a domestic well every year for coliform bacteria and nitrate, and every three to five years for arsenic (found across the Willamette Valley, the Tualatin basin, Lane County and Klamath and Lake counties), plus pH, hardness, iron, manganese, lead and copper once. Add uranium and radon in Lane County and the Cascade foothills, and test again after flooding, well work or a change in taste, color or smell. In the Southern Willamette Valley and Lower Umatilla Basin Groundwater Management Areas, nitrate is the test that matters most.

Free or low-cost testingAvailable

No statewide free program. The OSU Extension Well Water Program runs free nitrate screening clinics around the state and publishes testing guidance, and Oregon Health Authority's Domestic Well Safety Program (971-673-0440) helps owners read results. The Lower Umatilla Basin (Morrow and Umatilla counties) has state-funded free nitrate testing and water delivery for affected wells. Otherwise OHA puts bacteria and nitrate tests at about $20 to $40 each and arsenic at $25 to $45.

Getting your water tested near Multnomah County

The nearest certified lab that takes samples from homeowners is Columbia Laboratories Inc. in Portland, about 4 miles from the county's population center. 6 certified labs are within 40 miles in all. 6 of them say they take samples from homeowners.

Licensed well contractors serving Multnomah County

Licensed help in Multnomah County includes All Seasons Well Drilling and Alpine Resources and 22 others. Every listing was matched to the Oregon license list; the "verify" link on each profile opens the state lookup.

Well depth and water chemistry

In state well records, the median household well in Multnomah County is 240 feet deep, and the middle half run 160 to 420 feet (359 new domestic wells reported to OWRD since 2000). Contaminants worth testing for in this part of Oregon include arsenic, nitrate, coliform bacteria, and iron and manganese. A first full panel tells you which of them apply to your well.

Typical well depth
Median well240 ft
Most wells160 to 420 ft
Based on359 wells

New domestic wells reported to OWRD since 2000. "Most wells" is the middle half.

Contaminants to test for
  • ArsenicNaturally occurring across the Willamette Valley, the Tualatin basin, Lane County, the Klamath and Lake basins and parts of central Oregon
  • NitrateSouthern Willamette Valley, Lower Umatilla Basin and Northern Malheur groundwater management areas, and shallow wells in farm country
  • Coliform bacteriaStatewide, worst in shallow and older wells
  • Iron and manganeseValley alluvium and coastal sands
  • HardnessBasalt and limestone areas
  • Uranium and radonLane County granite and Cascade foothills
  • Hydrogen sulfideDeep basalt wells
  • Sodium and boronSome Willamette Valley aquifers
  • PFAS near airfields and industrial sites

Neighboring counties: Clackamas County, Washington County, Columbia County, Yamhill County.

Typical well costs: Oregon lab fees and national price ranges

Bacteria test (coliform and E. coli)$20 to $40published Oregon lab fees
Nitrate test$20 to $40published Oregon lab fees
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: Oregon Health Authority estimates; arsenic runs $25 to $45. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Oregon Health Authority testing recommendations, HomeGuide cost guides, Angi: cost to shock a well.

Questions Multnomah County well owners ask

How many people in Multnomah County use a private well?

The U.S. Geological Survey estimates about 7,100 people, under 1% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 359 new domestic wells reported to OWRD since 2000.

Where is the closest certified lab to Multnomah County?

Columbia Laboratories Inc. in Portland, about 4 miles from the county's population center. It says it accepts samples from homeowners.

Do I need a permit to drill a well in Multnomah County?

No statewide water test on a new well. The well must be built by an OWRD-licensed, bonded water supply well constructor (or by the landowner under a Landowner's Water Well Permit) to the OAR 690-210 standards, with a start card filed and the fee paid before drilling, a metal well ID tag attached, and a well report filed with OWRD within 30 days. Setbacks are 50 ft from a septic tank and 100 ft from a drainfield. Some counties ask for a bacteria test before a building permit is finaled, and some lenders do.

What does a well test cost near Multnomah County?

Published lab fees in Oregon: $20 to $40 for a bacteria test and $20 to $40 for nitrate (Oregon Health Authority testing recommendations). Mail-in kits cost about the same as walking in.