Tennessee county well guide

Well Water in Bledsoe County, TN: Testing, Contractors and Rules

About 7,900 people in Bledsoe County, 62% of residents, get their water from a private well. Nobody tests that water unless the owner does.

62%of residents on a private well
Share on private wells
Bledsoe County62%
Tennessee11%
5licensed contractors serve the county
37 mito the nearest certified lab, AIRL, Inc.. Call first: it may not take homeowner samples
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.

Bledsoe County is well country. A 2010 U.S. Geological Survey estimate puts about 7,900 people here, 62% of residents, on private wells, the 2nd highest share in Tennessee. State well records list 1,084 residential and farm wells reported to TDEC since 2000, with a median depth of 240 feet. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Bledsoe County

Private wells in Bledsoe County follow Tennessee's statewide rules, administered by the Tennessee Department of Environment and Conservation, Division of Water Resources. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for a household well. The Water Well Act requires the well to be drilled by a TDEC-licensed water well driller to the rule 0400-45-09 construction standards (steel casing at least 19 ft deep or 5 ft into bedrock, whichever is greater, grouted, ending 6 in above grade with a sanitary seal; 50 ft from septic tanks and drainfields, 10 ft from property lines), and the driller must file a well report with TDEC. A few counties permit wells through the county health department, Shelby County most notably, and some lenders want a bacteria test on a new well.

Water test when a home is soldNot required statewide

No statewide requirement. The Tennessee Residential Property Condition Disclosure asks only whether the water supply is a well and whether the seller knows of problems. Some lenders require a water test before closing.

What the state recommends

TDEC and the Department of Health recommend testing a private well for coliform bacteria every year, and for nitrate, pH, hardness, iron, manganese, lead and copper at least once and again every few years. Add radon and uranium in East Tennessee bedrock wells, arsenic on the Highland Rim and in West Tennessee sands, pesticides in shallow Coastal Plain wells, and test again after flooding, well work or a change in taste, color or smell. Karst wells in Middle and East Tennessee should be retested after heavy rain, when bacteria and turbidity spike.

Free or low-cost testingAvailable

No statewide free program. The Department of Health laboratory in Nashville (and the Knoxville regional laboratory for East Tennessee) tests private well and spring samples for bacteria, nitrate and metals for a modest fee; bottles and forms come through the county health department or the laboratory (615-262-6337). Some county health departments and UT Extension offices run periodic screening days.

Getting your water tested near Bledsoe County

1 certified lab is within 40 miles of Bledsoe County, the closest being AIRL, Inc. in Cleveland (about 37 miles from the county's population center). It does not list homeowner samples, so call first or use a mail-in kit from a state-certified lab.

Licensed well contractors serving Bledsoe County

5 licensed contractors list Bledsoe County as a home base or service area, including David Mills Welll Drilling and Hill Well Drilling. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

In state well records, the median household well in Bledsoe County is 240 feet deep, and the middle half run 160 to 340 feet (1,084 residential and farm wells reported to TDEC since 2000). Contaminants worth testing for in this part of Tennessee include coliform bacteria, nitrate, hardness, and iron and manganese. A first full panel tells you which of them apply to your well.

Typical well depth
Median well240 ft
Most wells160 to 340 ft
Based on1,084 wells

Residential and farm wells reported to TDEC since 2000. "Most wells" is the middle half.

Contaminants to test for
  • Coliform bacteriaThe most common failure statewide, worst in karst limestone wells that draw surface water after rain
  • NitrateFarm counties and shallow West Tennessee wells
  • HardnessLimestone across Middle and East Tennessee
  • Iron and manganeseWest Tennessee sands, the Cumberland Plateau and shale wells
  • Hydrogen sulfideShale and deeper limestone wells
  • Turbidity after stormsKarst wells
  • Acidic corrosive water that pulls lead and copper from plumbingPlateau sandstone and Blue Ridge wells
  • Radon and uraniumEast Tennessee crystalline rock and black shale
  • ArsenicLocally on the Highland Rim and in West Tennessee
  • PFAS near airfields and industrial sites

Neighboring counties: Rhea County, Van Buren County, Sequatchie County, Meigs County.

Typical well costs: Tennessee lab fees and national price ranges

Bacteria test (coliform and E. coli)$40published Tennessee lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$125published Tennessee lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: Tennessee Tech Water Center: $40 bacteria, $125 basic package with bacteria, minerals and nitrate. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Tennessee Tech Water Center lab, HomeGuide cost guides, Angi: cost to shock a well.

Questions Bledsoe County well owners ask

How many people in Bledsoe County use a private well?

The U.S. Geological Survey estimates about 7,900 people, 62% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 1,084 residential and farm wells reported to TDEC since 2000.

Where is the closest certified lab to Bledsoe County?

AIRL, Inc. in Cleveland, about 37 miles from the county's population center. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Bledsoe County?

No statewide water test and no state permit for a household well. The Water Well Act requires the well to be drilled by a TDEC-licensed water well driller to the rule 0400-45-09 construction standards (steel casing at least 19 ft deep or 5 ft into bedrock, whichever is greater, grouted, ending 6 in above grade with a sanitary seal; 50 ft from septic tanks and drainfields, 10 ft from property lines), and the driller must file a well report with TDEC. A few counties permit wells through the county health department, Shelby County most notably, and some lenders want a bacteria test on a new well.

What does a well test cost near Bledsoe County?

Published lab fees in Tennessee: $40 for a bacteria test (Tennessee Tech Water Center lab). Mail-in kits cost about the same as walking in.