Tennessee county well guide

Well Water in Johnson County, TN: Testing, Contractors and Rules

About 3,600 people in Johnson County, 20% of residents, get their water from a private well. Nobody tests that water unless the owner does.

20%of residents on a private well
Share on private wells
Johnson County20%
Tennessee11%
5licensed contractors serve the county
20 mito the nearest certified lab, Aqua Tech Service and Consulting. Call first: it may not take homeowner samples
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.

The U.S. Geological Survey's 2010 estimate puts the number of Johnson County residents on private wells at about 3,600, or 20%, well above the Tennessee figure of 11%. State well records list 1,062 residential and farm wells reported to TDEC since 2000, with a median depth of 300 feet. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Johnson County

The rules that apply in Johnson County are set at the state level in Tennessee. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for a household well. The Water Well Act requires the well to be drilled by a TDEC-licensed water well driller to the rule 0400-45-09 construction standards (steel casing at least 19 ft deep or 5 ft into bedrock, whichever is greater, grouted, ending 6 in above grade with a sanitary seal; 50 ft from septic tanks and drainfields, 10 ft from property lines), and the driller must file a well report with TDEC. A few counties permit wells through the county health department, Shelby County most notably, and some lenders want a bacteria test on a new well.

Water test when a home is soldNot required statewide

No statewide requirement. The Tennessee Residential Property Condition Disclosure asks only whether the water supply is a well and whether the seller knows of problems. Some lenders require a water test before closing.

What the state recommends

TDEC and the Department of Health recommend testing a private well for coliform bacteria every year, and for nitrate, pH, hardness, iron, manganese, lead and copper at least once and again every few years. Add radon and uranium in East Tennessee bedrock wells, arsenic on the Highland Rim and in West Tennessee sands, pesticides in shallow Coastal Plain wells, and test again after flooding, well work or a change in taste, color or smell. Karst wells in Middle and East Tennessee should be retested after heavy rain, when bacteria and turbidity spike.

Free or low-cost testingAvailable

No statewide free program. The Department of Health laboratory in Nashville (and the Knoxville regional laboratory for East Tennessee) tests private well and spring samples for bacteria, nitrate and metals for a modest fee; bottles and forms come through the county health department or the laboratory (615-262-6337). Some county health departments and UT Extension offices run periodic screening days.

Getting your water tested near Johnson County

2 certified labs are within 40 miles of Johnson County, the closest being Aqua Tech Service and Consulting in South Boone (about 20 miles from the county's population center). None of them lists homeowner samples, so call first or use a mail-in kit from a state-certified lab.

Licensed well contractors serving Johnson County

Licensed help in Johnson County includes Blue Ridge Waterworks, LLC and Casey’s Well Drilling and 3 others. Every listing was matched to the Tennessee license list; the "verify" link on each profile opens the state lookup.

Well depth and water chemistry

In state well records, the median household well in Johnson County is 300 feet deep, and the middle half run 220 to 420 feet (1,062 residential and farm wells reported to TDEC since 2000). Contaminants worth testing for in this part of Tennessee include coliform bacteria, nitrate, hardness, and iron and manganese. A first full panel tells you which of them apply to your well.

Typical well depth
Median well300 ft
Most wells220 to 420 ft
Based on1,062 wells

Residential and farm wells reported to TDEC since 2000. "Most wells" is the middle half.

Contaminants to test for
  • Coliform bacteriaThe most common failure statewide, worst in karst limestone wells that draw surface water after rain
  • NitrateFarm counties and shallow West Tennessee wells
  • HardnessLimestone across Middle and East Tennessee
  • Iron and manganeseWest Tennessee sands, the Cumberland Plateau and shale wells
  • Hydrogen sulfideShale and deeper limestone wells
  • Turbidity after stormsKarst wells
  • Acidic corrosive water that pulls lead and copper from plumbingPlateau sandstone and Blue Ridge wells
  • Radon and uraniumEast Tennessee crystalline rock and black shale
  • ArsenicLocally on the Highland Rim and in West Tennessee
  • PFAS near airfields and industrial sites

Neighboring counties: Carter County, Sullivan County, Washington County, Unicoi County.

Typical well costs: Tennessee lab fees and national price ranges

Bacteria test (coliform and E. coli)$40published Tennessee lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$125published Tennessee lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: Tennessee Tech Water Center: $40 bacteria, $125 basic package with bacteria, minerals and nitrate. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Tennessee Tech Water Center lab, HomeGuide cost guides, Angi: cost to shock a well.

Questions Johnson County well owners ask

How many people in Johnson County use a private well?

The U.S. Geological Survey estimates about 3,600 people, 20% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 1,062 residential and farm wells reported to TDEC since 2000.

Where is the closest certified lab to Johnson County?

Aqua Tech Service and Consulting in South Boone, about 20 miles from the county's population center. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Johnson County?

No statewide water test and no state permit for a household well. The Water Well Act requires the well to be drilled by a TDEC-licensed water well driller to the rule 0400-45-09 construction standards (steel casing at least 19 ft deep or 5 ft into bedrock, whichever is greater, grouted, ending 6 in above grade with a sanitary seal; 50 ft from septic tanks and drainfields, 10 ft from property lines), and the driller must file a well report with TDEC. A few counties permit wells through the county health department, Shelby County most notably, and some lenders want a bacteria test on a new well.

What does a well test cost near Johnson County?

Published lab fees in Tennessee: $40 for a bacteria test (Tennessee Tech Water Center lab). Mail-in kits cost about the same as walking in.