Tennessee county well guide

Well Water in Lake County, TN: Testing, Contractors and Rules

About 490 people in Lake County, 6% of residents, get their water from a private well. Nobody tests that water unless the owner does.

6%of residents on a private well
Share on private wells
Lake County6%
Tennessee11%
4licensed contractors serve the county
109 mito the nearest certified lab that takes homeowner samples, BAR Laboratory (Brown and Roberts)
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

Private wells serve a minority in Lake County: about 490 people, 6% of residents, by the U.S. Geological Survey's 2010 estimate, below the Tennessee figure of 11%. If yours is one of them, testing and upkeep are up to you.

Local rules for wells in Lake County

The rules that apply in Lake County are set at the state level in Tennessee. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellNot required statewide

No statewide water test and no state permit for a household well. The Water Well Act requires the well to be drilled by a TDEC-licensed water well driller to the rule 0400-45-09 construction standards (steel casing at least 19 ft deep or 5 ft into bedrock, whichever is greater, grouted, ending 6 in above grade with a sanitary seal; 50 ft from septic tanks and drainfields, 10 ft from property lines), and the driller must file a well report with TDEC. A few counties permit wells through the county health department, Shelby County most notably, and some lenders want a bacteria test on a new well.

Water test when a home is soldNot required statewide

No statewide requirement. The Tennessee Residential Property Condition Disclosure asks only whether the water supply is a well and whether the seller knows of problems. Some lenders require a water test before closing.

What the state recommends

TDEC and the Department of Health recommend testing a private well for coliform bacteria every year, and for nitrate, pH, hardness, iron, manganese, lead and copper at least once and again every few years. Add radon and uranium in East Tennessee bedrock wells, arsenic on the Highland Rim and in West Tennessee sands, pesticides in shallow Coastal Plain wells, and test again after flooding, well work or a change in taste, color or smell. Karst wells in Middle and East Tennessee should be retested after heavy rain, when bacteria and turbidity spike.

Free or low-cost testingAvailable

No statewide free program. The Department of Health laboratory in Nashville (and the Knoxville regional laboratory for East Tennessee) tests private well and spring samples for bacteria, nitrate and metals for a modest fee; bottles and forms come through the county health department or the laboratory (615-262-6337). Some county health departments and UT Extension offices run periodic screening days.

Getting your water tested near Lake County

No state-certified lab sits within 40 miles of Lake County, which is common in rural Tennessee. To give you options anyway, the list below shows the 6 closest certified labs, 62 to 140 miles away, with the distance on each one. The nearest that takes samples from homeowners is BAR Laboratory (Brown and Roberts) in Harrisburg, about 109 miles away. At that distance a mail-in kit is the practical route: the lab ships bottles, you sample at the cold kitchen tap and send them back the same day with an ice pack.

Licensed well contractors serving Lake County

Licensed help in Lake County includes Ark-Mo Well Drilling and Service Co., Inc and Ark-Mo Well Drilling Company, Inc and 2 others. Every listing was matched to the Tennessee license list; the "verify" link on each profile opens the state lookup.

Well depth and water chemistry

We have no county-level well records for Lake County yet. Statewide, county medians of residential and farm wells reported to TDEC since 2000 run from 80 ft (Coffee County) to 400 ft (Sullivan and Washington counties): about 240 to 400 ft in East Tennessee, 120 to 250 ft on the Cumberland Plateau, 80 to 300 ft in Middle Tennessee and 90 to 200 ft in West Tennessee. Contaminants worth testing for in this part of Tennessee include coliform bacteria, nitrate, hardness, and iron and manganese. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteriaThe most common failure statewide, worst in karst limestone wells that draw surface water after rain
  • NitrateFarm counties and shallow West Tennessee wells
  • HardnessLimestone across Middle and East Tennessee
  • Iron and manganeseWest Tennessee sands, the Cumberland Plateau and shale wells
  • Hydrogen sulfideShale and deeper limestone wells
  • Turbidity after stormsKarst wells
  • Acidic corrosive water that pulls lead and copper from plumbingPlateau sandstone and Blue Ridge wells
  • Radon and uraniumEast Tennessee crystalline rock and black shale
  • ArsenicLocally on the Highland Rim and in West Tennessee
  • PFAS near airfields and industrial sites

Neighboring counties: Obion County, Dyer County, Weakley County, Lauderdale County.

Typical well costs: Tennessee lab fees and national price ranges

Bacteria test (coliform and E. coli)$40published Tennessee lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$125published Tennessee lab fees
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: Tennessee Tech Water Center: $40 bacteria, $125 basic package with bacteria, minerals and nitrate. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Tennessee Tech Water Center lab, HomeGuide cost guides, Angi: cost to shock a well.

Questions Lake County well owners ask

How many people in Lake County use a private well?

The U.S. Geological Survey estimates about 490 people, 6% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Lake County?

BAR Laboratory (Brown and Roberts) in Harrisburg, about 109 miles from the county's population center. It says it accepts samples from homeowners. Nothing is closer than 40 miles, so ask about mail-in kits.

Do I need a permit to drill a well in Lake County?

No statewide water test and no state permit for a household well. The Water Well Act requires the well to be drilled by a TDEC-licensed water well driller to the rule 0400-45-09 construction standards (steel casing at least 19 ft deep or 5 ft into bedrock, whichever is greater, grouted, ending 6 in above grade with a sanitary seal; 50 ft from septic tanks and drainfields, 10 ft from property lines), and the driller must file a well report with TDEC. A few counties permit wells through the county health department, Shelby County most notably, and some lenders want a bacteria test on a new well.

What does a well test cost near Lake County?

Published lab fees in Tennessee: $40 for a bacteria test (Tennessee Tech Water Center lab). Mail-in kits cost about the same as walking in.