Texas county well guide

Well Water in Austin County, TX: Testing, Contractors and Rules

About 14,200 people in Austin County, 50% of residents, get their water from a private well. Nobody tests that water unless the owner does.

50%of residents on a private well
Share on private wells
Austin County50%
Texas7%
33licensed contractors serve the county
30 mito the nearest certified lab, The Texas Water Lab. Call first: it may not take homeowner samples
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.

About 14,200 people in Austin County, 50% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is well above the Texas figure of 7%. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Austin County

Private wells in Austin County follow Texas's statewide rules, administered by the Texas Department of Licensing and Regulation. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No statewide test. The driller must hold a TDLR license, build the well to the 16 TAC Chapter 76 standards (setbacks from septic systems and property lines, cement seal, disinfection) and file a State of Texas Well Report within 60 days. Nobody samples the water unless you do. If your county has a groundwater conservation district, it may require the well to be registered or permitted before drilling; domestic wells on larger tracts are usually exempt from permitting but not from registration.

Water test when a home is soldNot required statewide

No statewide requirement. The seller's disclosure notice only says whether the water comes from a well. Some lenders require a water test before closing, and a few groundwater districts ask for a well inspection when a tract changes hands.

What the state recommends

Texas A&M AgriLife Extension recommends a coliform bacteria test every year, and a nitrate test every year for wells near septic fields, feedlots or farm fields, plus a first-time panel of arsenic, fluoride, total dissolved solids, hardness, iron, manganese, sulfate and pH. Add uranium and gross alpha in the Hill Country and the Panhandle, and PFAS near airfields and military bases. Test again after flooding, repairs or any change in taste, color or smell.

Free or low-cost testingAvailable

The Texas Well Owner Network (Texas A&M AgriLife Extension) runs low-cost screening days around the state for bacteria, nitrate, arsenic and salinity, with results explained at a follow-up meeting. County and city health department labs listed below test for bacteria. The DSHS laboratory in Austin also sells mail-in kits.

Getting your water tested near Austin County

2 certified labs are within 40 miles of Austin County, the closest being The Texas Water Lab in Waller (about 30 miles from the county's population center). None of them lists homeowner samples, so call first or use a mail-in kit from a state-certified lab.

Licensed well contractors serving Austin County

33 licensed contractors list Austin County as a home base or service area, including 1st Choice Water Wells and 3G Drilling. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

We have no county-level well records for Austin County yet. Statewide, depth varies widely across the state, even within one aquifer; logs of nearby wells in the TWDB Submitted Drillers Report database are the best guide. Contaminants worth testing for in this part of Texas include nitrate, arsenic, fluoride, and radium and uranium. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • NitrateHigh Plains, Rolling Plains, Central Texas farm country
  • ArsenicSouthern High Plains, Gulf Coast, Trans-Pecos
  • FluorideWest Texas and the Panhandle
  • Radium and uraniumHickory aquifer around the Llano Uplift, parts of the Ogallala
  • High total dissolved solids and salinityWest and South Texas
  • Coliform bacteria
  • HardnessEdwards and Trinity limestones
  • Iron and manganese and hydrogen sulfideEast Texas
  • PFAS near military airfields

Neighboring counties: Waller County, Colorado County, Washington County, Fort Bend County.

Typical well costs: Texas lab fees and national price ranges

Bacteria test (coliform and E. coli)$20published Texas lab fees
Nitrate test$15published Texas lab fees
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Lab fees: City utility labs charge $20 for bacteria (Wichita Falls, Midland); Texas A&M AgriLife screenings cover bacteria, nitrate and salinity for $15 (a screening, not a certified test). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: City of Wichita Falls, Texas A&M AgriLife well screening, HomeGuide cost guides, Angi: cost to shock a well.

Questions Austin County well owners ask

How many people in Austin County use a private well?

The U.S. Geological Survey estimates about 14,200 people, 50% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.

Where is the closest certified lab to Austin County?

The Texas Water Lab in Waller, about 30 miles from the county's population center. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in Austin County?

No statewide test. The driller must hold a TDLR license, build the well to the 16 TAC Chapter 76 standards (setbacks from septic systems and property lines, cement seal, disinfection) and file a State of Texas Well Report within 60 days. Nobody samples the water unless you do. If your county has a groundwater conservation district, it may require the well to be registered or permitted before drilling; domestic wells on larger tracts are usually exempt from permitting but not from registration.

What does a well test cost near Austin County?

Published lab fees in Texas: $20 for a bacteria test and $15 for nitrate (City of Wichita Falls, Texas A&M AgriLife well screening). The low-cost nitrate option is a screening, not a certified test. Mail-in kits cost about the same as walking in.