Texas county well guide

Well Water in Goliad County, TX: Testing, Contractors and Rules

About 1,521 households in Goliad County, 51% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
51%of households on a private well
Share on wells, county vs state
Goliad County51%
Texas average5%
23licensed contractors serve the county
24 mito the nearest certified lab, Victoria County Public Health Department Water Laboratory
Nostatewide test required when a home is sold

Most homes in Goliad County are on a private well: about 1,521 households, 51% of the county. That makes Goliad County one of the places in Texas where the water department is the homeowner.

Local rules for wells in Goliad County

Private wells in Goliad County follow Texas's statewide rules, administered by Texas Department of Licensing and Regulation. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though lenders often ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No statewide test. The driller must hold a TDLR license, build the well to the 16 TAC Chapter 76 standards (setbacks from septic systems and property lines, cement seal, disinfection) and file a State of Texas Well Report within 60 days. Nobody samples the water unless you do. If your county has a groundwater conservation district, it may require the well to be registered or permitted before drilling; domestic wells on larger tracts are usually exempt from permitting but not from registration.

Water test when a home is soldNot required statewide

No statewide requirement. The seller's disclosure notice only says whether the water comes from a well. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from an accredited lab before closing, and a few groundwater districts ask for a well inspection when a tract changes hands.

What the state recommends

Texas A&M AgriLife Extension and TCEQ recommend a coliform bacteria test every year and a nitrate test every year, plus a first-time panel of arsenic, fluoride, total dissolved solids, hardness, iron, manganese, sulfate and pH. Add uranium and gross alpha in the Hill Country and the Panhandle, and PFAS near airfields and military bases. Test again after flooding, repairs or any change in taste, color or smell.

Free or low-cost testingAvailable

The Texas Well Owner Network (Texas A&M AgriLife Extension) runs low-cost screening days around the state, usually $10 to $15 a sample for bacteria, nitrate, arsenic and salinity, with results explained at a follow-up meeting. County and city health department labs listed below sell bacteria tests at cost. The DSHS laboratory in Austin also sells mail-in kits.

Getting your water tested near Goliad County

2 certified labs within 40 miles serve Goliad County, starting with Victoria County Public Health Department Water Laboratory in Victoria (about 24 miles from the county center). Each card below shows whether the lab takes homeowner samples and which tests it is certified for.

2 certified labs within 40 miles

Licensed well contractors serving Goliad County

23 licensed contractors serve Goliad County, including A C Water Well Serv and A C Water Well Service. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

Wells in Goliad County typically reach 100 to 400 ft in the Ogallala on the High Plains; 200 to 800 ft in the Trinity and Edwards limestones of the Hill Country and North Texas; 100 to 600 ft in the Gulf Coast and Carrizo-Wilcox sands of East and South Texas; shallower along river alluvium feet. What comes up with the water depends on the aquifer, and across Texas the usual suspects are nitrate (high plains, rolling plains, central texas farm country), arsenic (southern high plains. A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Nitrate (High Plains
  • Rolling Plains
  • Central Texas farm country)
  • Arsenic (southern High Plains
  • Gulf Coast
  • Trans-Pecos)
  • Fluoride (West Texas and the Panhandle)
  • Radium and uranium (Hickory aquifer around the Llano Uplift
  • Parts of the Ogallala)
  • High total dissolved solids and salinity (West and South Texas)
  • Coliform bacteria
  • Hardness (Edwards and Trinity limestones)
  • Iron and manganese and hydrogen sulfide (East Texas)
  • PFAS near military airfields

Neighboring counties: Victoria County, DeWitt County, Karnes County, Bee County.

What well work costs in Goliad County

Basic bacteria and nitrate test$25 to $75lab fee, homeowner sample
Full panel lab test$150 to $400metals, VOCs, radiologicals
Well inspection$250 to $550flow, pressure, visual, water test
Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job

National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.

Questions Goliad County well owners ask

How many homes in Goliad County are on a well?

About 1,521, or 51% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Goliad County?

Victoria County Public Health Department Water Laboratory in Victoria, about 24 miles away. It accepts homeowner samples.

Do I need a permit to drill a well in Goliad County?

No statewide test. The driller must hold a TDLR license, build the well to the 16 TAC Chapter 76 standards (setbacks from septic systems and property lines, cement seal, disinfection) and file a State of Texas Well Report within 60 days. Nobody samples the water unless you do. If your county has a groundwater conservation district, it may require the well to be registered or permitted before drilling; domestic wells on larger tracts are usually exempt from permitting but not from registration.

What does a well test cost near Goliad County?

A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.