Texas Institute for Applied Environmental Research (TIAER)
- Coliform Bacteria
About 3,800 people in Hamilton County, 45% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
About 3,800 people in Hamilton County, 45% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is well above the Texas figure of 7%. Nobody tests, treats or inspects that water unless the owner does.
Private wells in Hamilton County follow Texas's statewide rules, administered by the Texas Department of Licensing and Regulation. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.
No statewide test. The driller must hold a TDLR license, build the well to the 16 TAC Chapter 76 standards (setbacks from septic systems and property lines, cement seal, disinfection) and file a State of Texas Well Report within 60 days. Nobody samples the water unless you do. If your county has a groundwater conservation district, it may require the well to be registered or permitted before drilling; domestic wells on larger tracts are usually exempt from permitting but not from registration.
No statewide requirement. The seller's disclosure notice only says whether the water comes from a well. Some lenders require a water test before closing, and a few groundwater districts ask for a well inspection when a tract changes hands.
Texas A&M AgriLife Extension recommends a coliform bacteria test every year, and a nitrate test every year for wells near septic fields, feedlots or farm fields, plus a first-time panel of arsenic, fluoride, total dissolved solids, hardness, iron, manganese, sulfate and pH. Add uranium and gross alpha in the Hill Country and the Panhandle, and PFAS near airfields and military bases. Test again after flooding, repairs or any change in taste, color or smell.
The Texas Well Owner Network (Texas A&M AgriLife Extension) runs low-cost screening days around the state for bacteria, nitrate, arsenic and salinity, with results explained at a follow-up meeting. County and city health department labs listed below test for bacteria. The DSHS laboratory in Austin also sells mail-in kits.
1 certified lab is within 40 miles of Hamilton County, the closest being Texas Institute for Applied Environmental Research (TIAER) in Stephenville (about 32 miles from the county's population center). It does not list homeowner samples, so call first or use a mail-in kit from a state-certified lab.
1 certified labs within 40 miles of this county
20 licensed contractors list Hamilton County as a home base or service area, including Associated Well Services, Inc and BoreTek LLC. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.
20 licensed contractors
License 59346 Active
License 61447 Active
License 52485 Active
License 56066 Active
License 60094 Active
License 2317 Active
License 58127 Active
License 59313 Active
License 2620 Active
License 60681 Active
License 54176 Active
License 2460 Active
We have no county-level well records for Hamilton County yet. Statewide, depth varies widely across the state, even within one aquifer; logs of nearby wells in the TWDB Submitted Drillers Report database are the best guide. Contaminants worth testing for in this part of Texas include nitrate, arsenic, fluoride, and radium and uranium. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Comanche County, Bosque County, Erath County, Mills County.
Lab fees: City utility labs charge $20 for bacteria (Wichita Falls, Midland); Texas A&M AgriLife screenings cover bacteria, nitrate and salinity for $15 (a screening, not a certified test). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: City of Wichita Falls, Texas A&M AgriLife well screening, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 3,800 people, 45% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
Texas Institute for Applied Environmental Research (TIAER) in Stephenville, about 32 miles from the county's population center. Call first to ask whether they accept homeowner samples.
No statewide test. The driller must hold a TDLR license, build the well to the 16 TAC Chapter 76 standards (setbacks from septic systems and property lines, cement seal, disinfection) and file a State of Texas Well Report within 60 days. Nobody samples the water unless you do. If your county has a groundwater conservation district, it may require the well to be registered or permitted before drilling; domestic wells on larger tracts are usually exempt from permitting but not from registration.
Published lab fees in Texas: $20 for a bacteria test and $15 for nitrate (City of Wichita Falls, Texas A&M AgriLife well screening). The low-cost nitrate option is a screening, not a certified test. Mail-in kits cost about the same as walking in.