Bio Chem Lab, Inc.
- Arsenic
- Coliform Bacteria
- Iron and Manganese
- Lead
- Nitrate / Nitrite
About 3,500 people in McLennan County, 1% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
Most of McLennan County is on public water, but a 2010 U.S. Geological Survey estimate counts about 3,500 residents (1%) on private wells, below the Texas figure of 7%. If yours is one of them, testing and upkeep are up to you.
Private wells in McLennan County follow Texas's statewide rules, administered by the Texas Department of Licensing and Regulation. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.
No statewide test. The driller must hold a TDLR license, build the well to the 16 TAC Chapter 76 standards (setbacks from septic systems and property lines, cement seal, disinfection) and file a State of Texas Well Report within 60 days. Nobody samples the water unless you do. If your county has a groundwater conservation district, it may require the well to be registered or permitted before drilling; domestic wells on larger tracts are usually exempt from permitting but not from registration.
No statewide requirement. The seller's disclosure notice only says whether the water comes from a well. Some lenders require a water test before closing, and a few groundwater districts ask for a well inspection when a tract changes hands.
Texas A&M AgriLife Extension recommends a coliform bacteria test every year, and a nitrate test every year for wells near septic fields, feedlots or farm fields, plus a first-time panel of arsenic, fluoride, total dissolved solids, hardness, iron, manganese, sulfate and pH. Add uranium and gross alpha in the Hill Country and the Panhandle, and PFAS near airfields and military bases. Test again after flooding, repairs or any change in taste, color or smell.
The Texas Well Owner Network (Texas A&M AgriLife Extension) runs low-cost screening days around the state for bacteria, nitrate, arsenic and salinity, with results explained at a follow-up meeting. County and city health department labs listed below test for bacteria. The DSHS laboratory in Austin also sells mail-in kits.
2 certified labs are within 40 miles of McLennan County, the closest being Bio Chem Lab, Inc. in West (about 15 miles from the county's population center). None of them lists homeowner samples, so call first or use a mail-in kit from a state-certified lab.
2 certified labs within 40 miles of this county
20 licensed contractors list McLennan County as a home base or service area, including Brandon Shane Berry and Brien Water Wells. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.
20 licensed contractors
License 61979 Active
License 1750 Active
License 50472 Active
License 59886 Active
License 60621 Active
License 59660 Active
License 54576 Active
License 61874 Active
License 59643 Active
License 59904 Active
License 52692 Active
License 1551 Active
We have no county-level well records for McLennan County yet. Statewide, depth varies widely across the state, even within one aquifer; logs of nearby wells in the TWDB Submitted Drillers Report database are the best guide. Contaminants worth testing for in this part of Texas include nitrate, arsenic, fluoride, and radium and uranium. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Falls County, Bosque County, Hill County, Limestone County.
Lab fees: City utility labs charge $20 for bacteria (Wichita Falls, Midland); Texas A&M AgriLife screenings cover bacteria, nitrate and salinity for $15 (a screening, not a certified test). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: City of Wichita Falls, Texas A&M AgriLife well screening, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 3,500 people, 1% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
Bio Chem Lab, Inc. in West, about 15 miles from the county's population center. Call first to ask whether they accept homeowner samples.
No statewide test. The driller must hold a TDLR license, build the well to the 16 TAC Chapter 76 standards (setbacks from septic systems and property lines, cement seal, disinfection) and file a State of Texas Well Report within 60 days. Nobody samples the water unless you do. If your county has a groundwater conservation district, it may require the well to be registered or permitted before drilling; domestic wells on larger tracts are usually exempt from permitting but not from registration.
Published lab fees in Texas: $20 for a bacteria test and $15 for nitrate (City of Wichita Falls, Texas A&M AgriLife well screening). The low-cost nitrate option is a screening, not a certified test. Mail-in kits cost about the same as walking in.