Virginia county well guide

Well Water in City of Galax, VA: Testing, Contractors and Rules

About 31 households in City of Galax, 1% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
1%of households on a private well
Share on wells, county vs state
City of Galax1%
Virginia average23%
3licensed contractors serve the county
12 mito the nearest certified lab, Southwest Soils and Water Testing
Nostatewide test required when a home is sold

Most of City of Galax is on public water, but an estimated 31 households still rely on a private well. This page covers the rules, labs and licensed contractors that serve them.

Local rules for wells in City of Galax

Private wells in City of Galax follow Virginia's statewide rules, administered by Virginia Department of Health, Office of Environmental Health Services, through the local health departments. A water test is required when a new well is completed. There is no statewide test requirement when a home is sold, though lenders often ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellRequired

Yes. A private well needs a construction permit from the local health department before drilling, must be built by a DPOR-licensed contractor with the Water Well/Pump specialty to the Private Well Regulations (grouted casing, setbacks of 50 ft from septic tanks and 100 ft from drainfields), and after completion the health department inspects it and requires a bacteriological sample that passes before the well is placed in service. The inspection statement is your record of the well.

Water test when a home is soldNot required statewide

No statewide requirement. The Residential Property Disclosure Act does not require a water test. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample from a certified lab before closing, and buyers can ask the local health department for the well's construction permit and inspection file.

What the state recommends

The Virginia Department of Health and the Virginia Household Water Quality Program recommend a coliform bacteria test every year and nitrate at least every three years, with a broader first test for hardness, iron, manganese, pH, sodium, copper, lead, arsenic and fluoride. Add radon and uranium in the Piedmont and Blue Ridge, sodium and chloride in Coastal Plain wells, and test again after flooding, well work or a change in taste, color or smell.

Free or low-cost testingAvailable

The Virginia Household Water Quality Program (Virginia Tech and Virginia Cooperative Extension) runs county drinking water clinics through the year: you pick up a kit from the Extension office, drop the sample back, and get results for 14 tests (bacteria, nitrate, metals, hardness, pH and more) with an interpretation meeting, for about $65, free in counties with grant funding. Local health departments and the VDACS regional animal health laboratories also run a bacteria test for a small fee.

Getting your water tested near City of Galax

3 certified labs within 40 miles serve City of Galax, starting with Southwest Soils and Water Testing in Hillsville (about 12 miles from the county center). Each card below shows whether the lab takes homeowner samples and which tests it is certified for.

3 certified labs within 40 miles

Licensed well contractors serving City of Galax

3 licensed contractors serve City of Galax, including Claude S Brewer Well Drilling Co and Dixon Construction Company Inc. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

Wells in City of Galax typically reach 100 to 300 ft in the Coastal Plain sands east of I-95; 200 to 500 ft in the fractured rock of the Piedmont; 150 to 400 ft in the limestone valleys of the Shenandoah and Valley and Ridge; 200 to 600 ft in the Blue Ridge and the southwest coalfields. What comes up with the water depends on the aquifer, and across Virginia the usual suspects are coliform bacteria (the most common failure statewide, worst in the piedmont and the valley), hardness (shenandoah valley and other limestone areas), iron and manganese (coastal plain and piedmont). A first full panel tells you which of them apply to your well.

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Coliform bacteria (the most common failure statewide
  • Worst in the Piedmont and the Valley)
  • Hardness (Shenandoah Valley and other limestone areas)
  • Iron and manganese (Coastal Plain and Piedmont)
  • Corrosive low-pH water that pulls lead and copper from plumbing (Piedmont and Blue Ridge)
  • Radon and uranium (Piedmont granite)
  • Sodium
  • Chloride and fluoride (deep Coastal Plain wells)
  • Nitrate (Shenandoah Valley farm country
  • Eastern Shore)
  • Arsenic (locally in the Coastal Plain)
  • PFAS near airfields and military bases

Neighboring counties: Carroll County, Grayson County, Wythe County, Pulaski County.

What well work costs in City of Galax

Bacteria test (coliform and E. coli)$70published Virginia lab fees
Nitrate testIncludedpart of the bacteria test above
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Virginia Household Water Quality Program clinics: $70 covers 14 tests including bacteria and nitrate. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Henrico County, 2026 clinic, HomeGuide cost guides, Angi: cost to shock a well.

Questions City of Galax well owners ask

How many homes in City of Galax are on a well?

About 31, or 1% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to City of Galax?

Southwest Soils and Water Testing in Hillsville, about 12 miles away. Call first to ask whether they accept homeowner samples.

Do I need a permit to drill a well in City of Galax?

Yes. A private well needs a construction permit from the local health department before drilling, must be built by a DPOR-licensed contractor with the Water Well/Pump specialty to the Private Well Regulations (grouted casing, setbacks of 50 ft from septic tanks and 100 ft from drainfields), and after completion the health department inspects it and requires a bacteriological sample that passes before the well is placed in service. The inspection statement is your record of the well.

What does a well test cost near City of Galax?

Published lab fees in Virginia: $70 for a bacteria test that also covers nitrate. Virginia Household Water Quality Program clinics: $70 covers 14 tests including bacteria and nitrate. Mail-in kits cost about the same as walking in.