Washington county well guide

Well Water in Franklin County, WA: Testing, Contractors and Rules

About 4,730 households in Franklin County, 13% of the county, rely on a private well. Nobody tests that water unless the owner does.

Labs within 40 milesLicensed contractors
13%of households on a private well
Share on wells, county vs state
Franklin County13%
Washington average14%
23licensed contractors serve the county
<1 mito the nearest certified lab, RJ Lee Group, Inc. Columbia Basin Analytical Laboratories
Nostatewide test required when a home is sold

About 4,730 homes in Franklin County are on a private well. That is 13% of households, enough that every township has well owners and few of them have had the water tested recently.

Local rules for wells in Franklin County

The rules that apply in Franklin County are set at the state level in Washington. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellNot required statewide

No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.

Water test when a home is soldNot required statewide

No statewide requirement. The seller disclosure form (Form 17) only asks whether the property is on a well and whether the water has been tested. FHA, VA and USDA loans normally require a bacteria, nitrate and lead sample before closing, and a few counties require a well inspection or water test when a property with a well changes hands.

What the state recommends

The Washington Department of Health recommends testing a private well for coliform bacteria every year and for nitrate every three years, and a first-time test for arsenic, which is common in Washington groundwater. Add hardness, iron, manganese, fluoride, uranium and radon on a first panel, PFAS near military airfields and fire training sites, and test again after flooding, a change in taste, color or smell, or any work on the well.

Free or low-cost testingAvailable

No statewide free testing. A few local programs test for free or at cost: the Whatcom Conservation District tests nitrate in the Sumas-Blaine aquifer, the Lower Yakima Valley groundwater program tests nitrate in that area, and several county health departments and conservation districts run testing days. Otherwise, county health laboratories run a coliform test for roughly $25 to $50 and a nitrate test for a little more, and Ecology's lab list marks which labs accept samples from the public.

Getting your water tested near Franklin County

The nearest certified lab is RJ Lee Group, Inc. Columbia Basin Analytical Laboratories in Pasco, in the county, and it accepts samples from homeowners. There are 5 more within 40 miles, listed below with what each tests for.

5 certified labs within 40 miles

Licensed well contractors serving Franklin County

Licensed help in Franklin County includes AMERICAN DRILLING (Central Region) and Bernard W Volk and 21 others. Every listing was matched to the Washington license list; the "verify" link on each profile opens the state lookup.

Well depth and water chemistry

Well depth and water chemistry in Franklin County follow the rock underneath it. Typical wells here run 60 to 250 ft in the glacial deposits of the Puget Sound lowland and the Columbia River valleys; 150 to 500 ft in the basalt of the Columbia Plateau and the Yakima and Walla Walla valleys; 100 to 400 ft in the fractured rock of the Cascade and Okanogan foothills, where yields are low. Contaminants worth testing for in this part of Washington include arsenic (puget sound lowland, whatcom, snohomish and pierce counties, parts of the columbia plateau).

Typical well depth

Varies by location. Check the state well record search for logs of nearby wells.

Contaminants to test for
  • Arsenic (Puget Sound lowland
  • Whatcom
  • Snohomish and Pierce counties
  • Parts of the Columbia Plateau)
  • Nitrate (Sumas-Blaine aquifer in Whatcom County
  • Lower Yakima Valley
  • The Columbia Basin
  • Spokane-Rathdrum valley)
  • Coliform bacteria (shallow wells and dug wells west of the Cascades)
  • Iron and manganese (glacial deposits around Puget Sound)
  • Hardness (Columbia Plateau basalt)
  • Uranium and radon (Okanogan and Spokane County granite)
  • Fluoride and sodium (deep basalt wells)
  • Saltwater intrusion (island and coastal wells in San Juan
  • Island
  • Kitsap and Jefferson counties)
  • PFAS near military bases and airfields

Neighboring counties: Benton County, Adams County, Walla Walla County, Columbia County.

What well work costs in Franklin County

Basic bacteria and nitrate test$25 to $75lab fee, homeowner sample
Full panel lab test$150 to $400metals, VOCs, radiologicals
Well inspection$250 to $550flow, pressure, visual, water test
Submersible pump replacement$1,200 to $4,500parts and labor
Pressure tank replacement$400 to $1,200installed
Whole-house treatment system$800 to $6,000softener, iron filter, UV, RO
New well drilled$5,500 to $25,000about $25 to $65 per foot
Shock chlorination$80 to $300or about $20 as a DIY job

National ranges from published 2025 to 2026 contractor pricing. Local quotes vary with depth, access and materials.

Questions Franklin County well owners ask

How many homes in Franklin County are on a well?

About 4,730, or 13% of households, based on Census housing data and state well surveys. The share is highest outside the towns with public water.

Where is the closest certified lab to Franklin County?

RJ Lee Group, Inc. Columbia Basin Analytical Laboratories in Pasco, inside the county. It accepts homeowner samples.

Do I need a permit to drill a well in Franklin County?

No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.

What does a well test cost near Franklin County?

A bacteria and nitrate test runs $25 to $75 at most certified labs; a full panel with metals is $150 to $400. Mail-in kits cost about the same as walking in.