Lincoln County Environmental Health Lab
About 46 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples
- Coliform Bacteria
About 19,800 people in Stevens County, 45% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
About 19,800 people in Stevens County, 45% of residents, rely on a private well, according to a 2010 U.S. Geological Survey estimate. That is the 3rd highest share in Washington. Nobody tests, treats or inspects that water unless the owner does.
Private wells in Stevens County follow Washington's statewide rules, administered by the Washington Department of Ecology, Well Construction and Licensing Program. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.
No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.
No statewide requirement. The seller disclosure form (Form 17) only asks whether the property is on a well and whether the water has been tested. Some lenders require a water test before closing, and a few counties require a well inspection or water test when a property with a well changes hands.
The Washington Department of Health recommends testing a private well for coliform bacteria and nitrate every year, retesting nitrate in 6 months if it is 5 mg/L or higher, and testing for arsenic at least twice, once in summer and once in winter. Add hardness, iron, manganese, fluoride, uranium and radon on a first panel, PFAS near military airfields and fire training sites, and test again after flooding, a change in taste, color or smell, or any work on the well.
No statewide free testing. A few local programs test for free or at cost: the Whatcom Conservation District tests nitrate in the Sumas-Blaine aquifer, the Lower Yakima Valley groundwater program tests nitrate in that area, and several county health departments and conservation districts run testing days. The Department of Health says free nitrate and coliform testing is available inside set boundaries of the Lower Yakima Valley and western Benton County. Otherwise, county health laboratories run coliform and nitrate tests for a fee, and Ecology's lab list marks which labs accept samples from the public.
No state-certified lab sits within 40 miles of Stevens County, which is common in rural Washington. To give you options anyway, the list below shows the 6 closest certified labs, 46 to 115 miles away, with the distance on each one. The nearest that takes samples from homeowners is Lincoln County Environmental Health Lab in Davenport, about 46 miles away. At that distance a mail-in kit is the practical route: the lab ships bottles, you sample at the cold kitchen tap and send them back the same day with an ice pack.
6 certified labs, the closest to this county (none within 40 miles)
About 46 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples
About 47 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples
About 48 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples
About 50 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples
About 82 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples
About 115 miles away, outside the 40-mile range. Ask about mail-in sample kits.
22 licensed contractors list Stevens County as a home base or service area, including A&H Well Services LLC and Beardslee Drilling LLC. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.
22 licensed contractors
License 3448 Active
License 2905 Active
License 337 Active
License 2843 Active
License 3258 Active
License 1971 Active
License 2321 Active
License 3335 Active
License 3280 Active
License 2871 Active
License 3478 Active
License 3184 Active
We have no county-level well records for Stevens County yet. Statewide, depth varies widely across the state; logs of nearby wells in Ecology's well report map are the best guide. Contaminants worth testing for in this part of Washington include arsenic, nitrate, coliform bacteria, and iron and manganese. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Pend Oreille County, Ferry County, Spokane County, Lincoln County.
Lab fees: Washington DOH list of certified labs; the Thurston County water lab charges $32 for each test. Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Washington DOH nitrate and coliform labs, Thurston County water lab, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 19,800 people, 45% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
Lincoln County Environmental Health Lab in Davenport, about 46 miles from the county's population center. It says it accepts samples from homeowners. Nothing is closer than 40 miles, so ask about mail-in kits.
No statewide water test from Ecology. What the state requires is a notice of intent and fee filed with Ecology at least 72 hours before drilling, a licensed water well driller, construction to the chapter 173-160 WAC standards (100 ft from septic drainfields, surface seal, a well tag) and a well report filed within 30 days. The test comes in through the county: to get a building permit on a well, most counties ask for proof of potable water, which usually means a coliform bacteria and nitrate test from an accredited lab, and some add arsenic. Check with your county health department before the well is drilled.
Published lab fees in Washington: $21 to $55 for a bacteria test and $21 to $55 for nitrate (Washington DOH nitrate and coliform labs, Thurston County water lab). Mail-in kits cost about the same as walking in.