SGS North America Inc. – Dayton
- Certification
- State certified list checked June 11, 2024
- Certified in
- 3 states PA, CO and AZ
- Tests listed
- 4 Arsenic and more
- Homeowner samples
- Yes Mail-in
About SGS North America Inc. – Dayton
SGS North America Inc. – Dayton is a commercial laboratory in Dayton, NJ (Middlesex County). It is on the Pennsylvania, Colorado and Arizona drinking water programs' list of certified laboratories, and we last checked the list on June 11, 2024.
The lab takes samples from homeowners and ships mail-in sample kits.
Accredited by the Pennsylvania Department of Environmental Protection Bureau of Laboratories (lab ID 68-00408) for drinking water analysis. Accredited analytes: .
This profile is built from the official state list of certified drinking water laboratories, checked on June 11, 2024. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.
Certification and services
State certified- Certified by
- Pennsylvania, Colorado and Arizona drinking water programs
- Lab type
- Commercial
- Last verified
- June 11, 2024
Certifications
- Pennsylvania: No. 68-00408 · chem · checked Jun 11, 2024 source
- Colorado: No. NJ00141 · chem · checked Sep 29, 2026 source
- Arizona: No. AZ0786 · Drinking water · checked Oct 8, 2026 source
Listed on the official state certified laboratory list.
How to test your water here
How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.
Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Prices at this lab may differ.
- 1
Call for the right bottles
Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.
- 2
Collect from a cold tap before treatment
Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.
- 3
Keep it cold and deliver within 24 hours
Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.
- 4
Read the report against the standards
Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.
Tests this lab is listed for
From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.
Arsenic
Natural in some bedrock, with no taste or smell. The EPA limit is 0.010 mg/L. Learn more
Lead
Usually from plumbing and older well parts. EPA says there is no safe level. Learn more
PFAS
Forever chemicals. EPA set limits of 4 parts per trillion for PFOA and PFOS. Learn more
Volatile Organic Compounds
Fuel and solvent chemicals from spills and leaking tanks. Learn more
Location
2235 US Route 130, Dayton, NJ 08810
Lab address
Questions about SGS North America Inc. – Dayton
Is SGS North America Inc. – Dayton state certified?
Yes. It is on the Pennsylvania, Colorado and Arizona list of laboratories certified for drinking water testing, last checked June 11, 2024.
What can SGS North America Inc. – Dayton test well water for?
Its listing covers arsenic, lead, pfas and volatile organic compounds. Call to confirm prices and which tests it runs for private well owners.
Can I bring my own well water sample?
Yes, the listing says it takes homeowner samples and ships mail-in kits. Get the right bottle from the lab first, especially for bacteria.
How do I contact SGS North America Inc. – Dayton?
Call (732) 329-0200 and visit the lab's website. The address is 2235 US Route 130, Dayton, NJ 08810.

