Alliance Technical Group, LLC-Akron (formerly Summit Env. Tech.)
Homeowner samples · Mail-in kits
- Arsenic
- Hardness
- Iron and Manganese
- Lead
- Nitrate / Nitrite
- Pesticides
- PFAS
- Uranium
- Volatile Organic Compounds
About 1,823,000 people in Ohio get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.
The short version: About 1.8 million Ohioans, 16% of residents, drink from a private well (USGS estimate, 2010). The rules are written in Columbus, but the permit, the inspection and the first water sample all come from your county health district. Once that sample passes, nobody tests the water again unless you do.
| Ohio at a glance | |
|---|---|
| Permit to drill a home well | Yes, from your local health district, before a well is drilled, deepened, replaced or altered |
| Who can drill it | A contractor registered with ODH for well construction |
| Water test for a new well | Required: total coliform and E. coli, collected by a health district sanitarian. Nitrate may be checked too |
| Water test when a home sells | Not required statewide (some lenders ask for one) |
| Biggest natural concern | Arsenic in the northwest and central glacial aquifers. Iron, manganese and sulfur in the east and south |
| Typical household well depth | Depth varies widely across the state. Logs of nearby wells are the best guide |
| Where to test | A health district lab or an Ohio EPA certified lab |
Ohio handles wells differently from most of its neighbors. Here’s who does what:
| Agency | What it handles |
|---|---|
| Ohio Department of Health (ODH), Private Water Systems Program | Writes the private water system rules (OAC 3701-28) and registers every contractor who drills wells, sets pumps, installs treatment or seals old wells |
| Local health districts | Issue the permit before a well is drilled or altered, inspect it when it is finished, collect the water sample that decides whether the system is approved, and run real estate evaluations on request |
| Ohio Department of Natural Resources, Division of Geological Survey | Keeps the well logs drillers have filed since 1945 and puts them online by county and address |
| Ohio EPA | Certifies the labs that test drinking water |
Once the system is approved, the water quality is your responsibility. Water tests are not required after that.
OAC 3701-28 covers the permit, the inspection and one required test. Here’s how it works:
After approval, testing is up to you. Here’s where the state stands:
Under OAC 3701-28 a permit from the local health district is required before a well is drilled or altered. When the work is done, the owner asks the health district for the final inspection, and a sanitarian collects the water sample: total coliform and E. coli, and the district may also check nitrate. The system is approved only when the sample passes (4 or fewer total coliform per 100 mL and no E. coli for a well without continuous disinfection).
No statewide requirement. Most local health districts offer a real-estate evaluation of the well on request (a visual inspection plus a bacteria and nitrate sample), and some lenders ask for one. Ask the county health district for its fee and turnaround.
ODH recommends a total coliform and nitrate test every year, and every time the water changes in taste, color or smell, after flooding, or after any work on the well or pump. Add arsenic, iron and manganese, hardness and sulfate at least once, and PFAS or methane where local conditions call for it.
No statewide free program. Several county health districts run their own labs (Erie, Logan, Mahoning, Canton City among them) and sell bacteria and nitrate tests at cost; others sell bottles from a certified lab. OSU Extension fact sheet AEX-315 lists labs that accept samples from homeowners.
Two problems follow geology across the state, and the glacial line is the dividing point. Find your area below.
| Region | Typical household well | What to expect |
|---|---|---|
| Glaciated northwest and central counties | Often in buried sand and gravel | Naturally occurring arsenic in wells drawing from buried sand and gravel. The same farm country puts nitrate into shallow wells. |
| East and south of the glacial line | In shale and coal-measure sandstone | Iron, manganese, sulfate and the rotten egg smell of hydrogen sulfide, sometimes with radium or uranium. |
| Eastern oil and gas counties | In bedrock | Wells near oil and gas fields should be checked for methane. |
Depth varies widely across the state. Logs of nearby wells are the best guide, and your ODNR well log shows the depth of yours. Our well record finder links to them.
Hard water is nearly universal in Ohio, and coliform bacteria can show up anywhere.
This combines ODH’s guidance with Ohio State University Extension’s fact sheet on household well testing.
| Test | How often | Who needs it |
|---|---|---|
| Total coliform and nitrate | Every year | Every well |
| pH and total dissolved solids (or conductivity) | Every year, with the bacteria and nitrate test | Every well |
| Arsenic | At least once, and regularly if it shows up | Every well, especially in the northwest and central glacial counties |
| Iron, manganese, hardness and sulfate | At least once, and before you buy treatment equipment | Every well, especially east and south of the glacial line |
| Lead, copper, pH, corrosion index and hardness | From a first flush sample after the water sits in the pipes overnight | Homes with naturally soft or treated water |
| Methane, plus a baseline panel | Before nearby oil or gas drilling starts | Wells near oil and gas fields in the eastern counties |
| PFAS | Where local conditions call for it | Homes near a known source |
| Bacteria and nitrate retest | After flooding, any work on the well or pump, or a change in taste, color or smell | Every well |
Why bacteria and nitrate get top billing: bacteria is the test that decides whether a new Ohio well gets approved, and both ODH and OSU Extension put bacteria and nitrate at the top of the yearly list. Arsenic deserves a one-time look too. When the USGS sampled 57 domestic wells in Preble, Miami and Shelby counties in 2002 to 2003, 37% were over the 10 ppb standard. Skip the lab test for a rotten egg smell, though. Hydrogen sulfide escapes from the sample on the way to the lab. If a result comes back bad, our shock chlorination calculator, arsenic guide and treatment planner walk you through the next step.
You have two ways to get tested in Ohio:
| Option | Best for | Cost |
|---|---|---|
| Health district lab (Erie, Logan, Mahoning and Canton City among them), or a district that sells bottles from a certified lab | The yearly bacteria and nitrate check | Sold at cost, usually the cheapest route |
| Ohio EPA certified commercial lab | Arsenic, metals, a full panel, or a lender’s test | Varies by lab |
Ohio has no statewide free testing program. Call the lab first and ask about bottles, hold times and price. Samples need to reach the lab quickly, kept cold and in the dark, and some labs won’t take samples on Fridays or weekends. OSU’s Well Water Interpretation Tool can help you read the report.
Ohio EPA certifies laboratories for public drinking water, and the same labs run private well samples. The list below comes from the Ohio EPA certified laboratory list dated September 2026 and marks the labs that OSU Extension (fact sheet AEX-315) confirms will take a homeowner sample. For the rest, call first.
39 certified labs
Homeowner samples · Mail-in kits
Homeowner samples
Homeowner samples
Three things to know before you hire in Ohio:
The profiles below come from the ODH Contractor Activity Status Report dated 08/31/2026 and show each contractor’s registration number and declared activities, plus out-of-state drillers who are registered to work in Ohio.
606 licensed contractors
License 4814 Active
License 9999-PWSC-26-000337 Active
License 9999-PWSC-26-000312 Active
License 9999-PWSC-26-000001 Active
License 9999-PWSC-26-000098 Active
License 9999-PWSC-26-000350 Active
Well use swings hard from county to county:
Each county page carries its well population, the nearest certified labs and the registered contractors based there.
Yes. The local health district issues a private water system permit before a well is drilled, deepened or replaced, and most districts also require an alteration permit for work such as replacing a pump or adding treatment, so check with yours. The contractor doing the work must be registered with ODH for that activity.
No statewide test is required. Health districts offer a real estate evaluation on request, typically a visual inspection plus a bacteria and nitrate sample, and some lenders ask for one. Ask your county health district for its fee and turnaround.
Search the ODNR well log database by county, township or address. Logs filed since 1945 show the depth, the casing, the static water level and the driller. Wells drilled before that, or never reported, will not be on file.
Mostly in the glacial aquifers of northwest and central Ohio, where it can exceed the 10 ppb standard in a meaningful share of wells. A one-time arsenic test is cheap, and a reverse osmosis unit at the kitchen tap is the usual fix.
Every year for total coliform and nitrate, as ODH recommends, and OSU Extension adds pH and total dissolved solids to that yearly test. Test arsenic, iron, manganese, hardness and sulfate at least once. Retest after flooding, any work on the well or pump, or a change in taste, color or smell.