Home Land Labs – Towson
Homeowner samples
- Arsenic
- Coliform Bacteria
- Lead
- Nitrate / Nitrite
About 57,500 people in Baltimore County, 7% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010. Labs and contractors: state certification and license lists.
Private wells serve a minority in Baltimore County: about 57,500 people, 7% of residents, by the U.S. Geological Survey's 2010 estimate, one of the lowest shares in Maryland. If yours is one of them, testing and upkeep are up to you.
The rules that apply in Baltimore County are set at the state level in Maryland. New wells must be tested before use, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
Yes. A well construction permit from the county health department is required before drilling, the well must be built by a Maryland licensed well driller to COMAR 26.04.04 (grouted casing, 100 ft from a septic tank or drainfield, or 50 ft where the well draws from a confined aquifer, minimum yields by use), and before the house can be occupied the county issues a certificate of potability based on a sample from an MDE-certified lab that passes the county's potability tests, usually bacteria plus a chemical panel. Several counties add tests (Anne Arundel, for example, requires two consecutive passing bacteria tests, one chemical test, and radionuclide, arsenic and cadmium tests where applicable). The driller files the well completion report with the county.
No statewide requirement. Maryland's residential disclosure asks about the water supply and known problems, and a few counties require a bacteria test or a yield test when a property on a well changes hands (check the county health department). Some lenders require a water test before closing.
University of Maryland Extension and MDE recommend testing a private well every year for coliform bacteria and nitrate, and every three years for pH, hardness, iron, manganese, lead, copper and total dissolved solids. Add arsenic and radium in the Coastal Plain (the Aquia and Patuxent aquifers under Anne Arundel, Calvert, Prince George's and the Eastern Shore), radon and uranium in the Piedmont, PFAS near Patuxent River, Fort Meade and other airfields, chloride and sodium on the lower Eastern Shore, and test again after flooding, well work or a change in taste, color or smell.
No free program. The county health departments do not run labs but will tell you which certified labs serve the county, and several commercial labs on the MDE list (Water Testing Labs of MD, Home Land Labs, Fredericktowne Labs, Certified Water Testing, Chesapeake Environmental) are built around homeowner samples and run the potability panel. University of Maryland Extension's Wells and Septic Systems program runs periodic free screening clinics.
The nearest certified lab that takes samples from homeowners is Home Land Labs – Towson in Towson, about 3 miles from the county's population center. 15 certified labs are within 40 miles in all. 8 of them say they take samples from homeowners.
15 certified labs within 40 miles of this county
Homeowner samples
Licensed help in Baltimore County includes Carroll Water LLC and Caswell Testing & Water Systems and 5 others. Every listing was matched to the Maryland license list; the "verify" link on each profile opens the state lookup.
7 licensed contractors
License MWD553, JWD417, PI0074, WCI050 Active
License MWD590, PI0188, WCI179 Active
License WCI085 Active
License MWD458 Active
License MWD161, MGD173, JGD122, MGD175 Active
License MSD163 Active
License MWD421 Active
We have no county-level well records for Baltimore County yet. Statewide, depth varies widely across the state: fractured crystalline rock in the Piedmont (Montgomery, Howard, Baltimore, Carroll and eastern Frederick counties), where yields are modest and a dry hole is possible; stacked sand aquifers in the Coastal Plain of the Eastern Shore and Southern Maryland; limestone and sandstone in the Hagerstown Valley and the western mountains. Logs of nearby wells, held by the county health department, are the best guide. Contaminants worth testing for in this part of Maryland include coliform bacteria, nitrate, arsenic, and radium. A first full panel tells you which of them apply to your well.
Varies by location. Check the state well record search for logs of nearby wells.
Neighboring counties: Howard County, Harford County, Anne Arundel County, Carroll County.
Lab fees: Maryland state lab fees; a county health department may add a collection fee ($50 in Frederick County). Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: Maryland Department of Health lab fees, Frederick County Health Department, HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 57,500 people, 7% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data.
Home Land Labs – Towson in Towson, about 3 miles from the county's population center. It says it accepts samples from homeowners.
Yes. A well construction permit from the county health department is required before drilling, the well must be built by a Maryland licensed well driller to COMAR 26.04.04 (grouted casing, 100 ft from a septic tank or drainfield, or 50 ft where the well draws from a confined aquifer, minimum yields by use), and before the house can be occupied the county issues a certificate of potability based on a sample from an MDE-certified lab that passes the county's potability tests, usually bacteria plus a chemical panel. Several counties add tests (Anne Arundel, for example, requires two consecutive passing bacteria tests, one chemical test, and radionuclide, arsenic and cadmium tests where applicable). The driller files the well completion report with the county.
Published lab fees in Maryland: $41 for a bacteria test and $18 for nitrate (Maryland Department of Health lab fees, Frederick County Health Department). Mail-in kits cost about the same as walking in.