Anatek Labs (Moscow)
- Certification
- State certified list checked October 8, 2026
- Tests listed
- 1 Coliform Bacteria
- Homeowner samples
- Call to ask not listed on the record
About Anatek Labs (Moscow)
Anatek Labs (Moscow) is a commercial laboratory in Moscow, ID (Latah County). It is on the Montana drinking water program's list of certified laboratories, and we last checked the list on October 8, 2026.
The record does not say whether it takes samples from homeowners. Some certified labs only work with public water systems, so call before you collect a sample.
Before you go: Certified by the Montana DPHHS Laboratory Certification Program to test drinking water (microbiology). Call before sending a private well sample to confirm prices, bottles and shipping.
This profile is built from the official state list of certified drinking water laboratories, checked on October 8, 2026. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.
Certification and services
- Certified by
- Montana drinking water program
- Certified for
- Drinking water: microbiology
- Lab type
- Commercial
- Last verified
- October 8, 2026
Listed on the official state certified laboratory list.
How to test your water here
How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.
Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Prices at this lab may differ.
- 1
Call for the right bottles
Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.
- 2
Collect from a cold tap before treatment
Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.
- 3
Keep it cold and deliver within 24 hours
Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.
- 4
Read the report against the standards
Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.
Tests this lab is listed for
From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.
Coliform Bacteria
Total coliform and E. coli. The test the CDC recommends every year for every private well. Learn more
Location
1282 Alturas Drive, Moscow, ID 83843
Lab address
Questions about Anatek Labs (Moscow)
Is Anatek Labs (Moscow) state certified?
Yes. It is on the Montana list of laboratories certified for drinking water testing, last checked October 8, 2026.
What can Anatek Labs (Moscow) test well water for?
Its listing covers coliform bacteria. Call to confirm prices and which tests it runs for private well owners.
Can I bring my own well water sample?
The listing does not say. Some certified labs only test for public water systems, so call before collecting a sample.
How do I contact Anatek Labs (Moscow)?
Call (208) 883-2839 and visit the lab's website. The address is 1282 Alturas Drive, Moscow, ID 83843.

