Montana county well guide

Well Water in Cascade County, MT: Testing, Contractors and Rules

About 8,600 people in Cascade County, 11% of residents, get their water from a private well. Nobody tests that water unless the owner does.

11%of residents on a private well
Share on private wells
Cascade County11%
Montana29%
6licensed contractors serve the county
<1 mito the nearest certified lab that takes homeowner samples, Great Falls Water Treatment Plant Laboratory
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.

Most of Cascade County is on public water, but a 2010 U.S. Geological Survey estimate counts about 8,600 residents (11%) on private wells, one of the lowest shares in Montana. State well records list 2,736 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990, with a median depth of 210 feet. If yours is one of them, testing and upkeep are up to you.

Local rules for wells in Cascade County

Private wells in Cascade County follow Montana's statewide rules, administered by the Montana Board of Water Well Contractors. No water test is required by the state when a new well is completed. There is no statewide test requirement when a home is sold, though some lenders ask for one. The cards below show the details and the official sources.

At a glance

Water test for a new wellNot required statewide

No state water test. A home well needs a water right filing with DNRC (Form 602I Notice of Intent, $400, then Form 602) and a driller licensed by the Board of Water Well Contractors, who files the well log with GWIC within 60 days. Some counties, such as Missoula, issue their own well permits.

Water test when a home is soldNot required statewide

No state requirement. Buyers often ask for a bacteria and nitrate test, and some lenders require one. The State Environmental Laboratory runs a HUD/FHA test for $90.

What the state recommends

Every year: coliform bacteria and nitrate, ideally in spring. First test: a full panel with arsenic, uranium, manganese, fluoride, selenium, lead, copper, hardness and total dissolved solids (MSU Extension). See the full list by region below.

Free or low-cost testingAvailable

No free statewide program. MSU Well Educated runs reduced cost testing through county Extension offices (for example, a full panel for $125 in Park County), and the State Environmental Laboratory tests bacteria for $25.

Getting your water tested near Cascade County

For a homeowner test, start with Great Falls Water Treatment Plant Laboratory in Great Falls (close to where most people in the county live), the closest certified lab that accepts private well samples. The cards below list every certified lab within 40 miles and which tests each is certified for.

Licensed well contractors serving Cascade County

6 licensed contractors list Cascade County as a home base or service area, including 406 Water Wells, LLC and AAAA Water Well, Inc. Each profile carries the state license number and the date we checked it, and the filters below sort them by drilling, pump work or treatment.

Well depth and water chemistry

In state well records, the median household well in Cascade County is 210 feet deep, and the middle half run 100 to 400 feet (2,736 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990). Contaminants worth testing for in this part of Montana include coliform bacteria, arsenic, manganese, and uranium. A first full panel tells you which of them apply to your well.

Typical well depth
Median well210 ft
Most wells100 to 400 ft
Based on2,736 wells

Household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990. "Most wells" is the middle half.

Contaminants to test for
  • Coliform bacteriaAbout 1 in 4 well samples
  • ArsenicNaturally occurring
  • ManganeseNaturally occurring
  • UraniumNaturally occurring
  • NitrateSeptic systems and farming
  • Fluoride
  • Selenium
  • Iron and iron bacteria
  • Sulfate and total dissolved solidsEastern plains

Neighboring counties: Teton County, Chouteau County, Judith Basin County, Pondera County.

Typical well costs: national price ranges

Bacteria test (coliform and E. coli)$10 to $60state, county and university lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: HomeGuide cost guides, Angi: cost to shock a well.

Questions Cascade County well owners ask

How many people in Cascade County use a private well?

The U.S. Geological Survey estimates about 8,600 people, 11% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 2,736 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990.

Where is the closest certified lab to Cascade County?

Great Falls Water Treatment Plant Laboratory in Great Falls, close to the county's population center. It says it accepts samples from homeowners.

Do I need a permit to drill a well in Cascade County?

No state water test. A home well needs a water right filing with DNRC (Form 602I Notice of Intent, $400, then Form 602) and a driller licensed by the Board of Water Well Contractors, who files the well log with GWIC within 60 days. Some counties, such as Missoula, issue their own well permits.

What does a well test cost near Cascade County?

Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Mail-in kits cost about the same as walking in.