Private well guide

Well Water in Montana: Testing, Rules, Labs and Licensed Contractors

About 282,000 people in Montana get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

104Licensed contractorschecked against state records
28Certified labsfrom the state certified list
56Counties covered
282,000People on private wells29% of residents (USGS, 2010)

The short version: About 282,000 Montanans, 29% of residents, drink from a private well (USGS estimate, 2010). The state never tests that water for you. Montana licenses the people who drill wells and tracks every well log, but the water is your job. In MSU’s Well Educated program, about 1 in 4 well samples had coliform bacteria.

Montana at a glance
Permit to drill a home well No state drilling permit. A water right filing with DNRC: a Notice of Intent (Form 602I, $400) since January 1, 2026, then a Notice of Completion (Form 602)
Who can drill it A water well contractor or driller licensed by the Board of Water Well Contractors, or the landowner with a Board permit
Water test for a new well Not required by the state
Water test when a home sells Not required by the state (lenders and buyers often ask for one)
Most common problem Coliform bacteria, followed by arsenic and manganese
Typical household well depth Varies by county: medians run from about 40 feet in Yellowstone County to about 550 feet in Fallon County (state well records, Montana GWIC)
Where to test A lab certified by the Montana Department of Public Health and Human Services (DPHHS)

Who is in charge of a Montana well

Four state offices deal with home wells. None of them checks the water unless you send it in.

Agency What it handles
Board of Water Well Contractors (part of DNRC) Licenses water well contractors, drillers and monitoring well constructors, and enforces the well construction standards
DNRC Water Resources Division Water rights. A home well is a groundwater right, filed on Forms 602I and 602
Montana Bureau of Mines and Geology (MBMG) Runs the Ground Water Information Center (GWIC), which holds the well logs drillers file for every new well
DPHHS Certifies drinking water labs and runs the State Environmental Laboratory, which tests private wells

The Department of Environmental Quality steps in only for public water systems. A well serving your own home isn’t one of those.

What is required, and what is left to you

Montana’s well rules focus on who drills the well and how water rights are filed. Here is what applies to a typical home well:

  • File for the water right. A home well that pumps 35 gallons per minute or less and uses no more than 10 acre-feet a year doesn’t need a full water use permit. Since January 1, 2026, you file a Notice of Intent (Form 602I, $400) with the DNRC regional office for your county. Once DNRC authorizes it, you have five years to put the water to use and file a Notice of Completion (Form 602).
  • Hire a licensed driller. Montana licenses people, not companies. A landowner can drill a well on their own farm, ranch or home property, but only with a permit from the Board and only if the well meets the Board’s construction standards.
  • Mind the setbacks. A new well has to be at least 50 feet from a septic tank and 100 feet from a drainfield, seepage pit or cesspool. The Board also recommends 10 feet from property lines.
  • Get the well log. Your driller files it with GWIC within 60 days of finishing the well and sends you a copy. It records the depth, the water level and what the drill went through.

Some counties add their own rules on top of the state’s. Missoula, for one, issues well permits through its health department, so call your county before you drill.

Testing the water is up to you. Here’s where the state stands:

At a glance

Water test for a new wellNot required statewide

No state water test. A home well needs a water right filing with DNRC (Form 602I Notice of Intent, $400, then Form 602) and a driller licensed by the Board of Water Well Contractors, who files the well log with GWIC within 60 days. Some counties, such as Missoula, issue their own well permits.

Water test when a home is soldNot required statewide

No state requirement. Buyers often ask for a bacteria and nitrate test, and some lenders require one. The State Environmental Laboratory runs a HUD/FHA test for $90.

What the state recommends

Every year: coliform bacteria and nitrate, ideally in spring. First test: a full panel with arsenic, uranium, manganese, fluoride, selenium, lead, copper, hardness and total dissolved solids (MSU Extension). See the full list by region below.

Free or low-cost testingAvailable

No free statewide program. MSU Well Educated runs reduced cost testing through county Extension offices (for example, a full panel for $125 in Park County), and the State Environmental Laboratory tests bacteria for $25.

What the water is like in each part of Montana

The Continental Divide splits Montana into two very different kinds of water country, and the plains in the east are a third.

Region Typical household well What to expect
Northwest valleys (Flathead, Lake, Lincoln, Sanders, Missoula, Mineral and Ravalli counties) Median about 95 ft in Ravalli County to 220 ft in Flathead, Lake and Sanders counties Glacial sand and gravel, and usually plenty of water. Iron is a common nuisance, and the DNRC publishes a guide to iron bacteria, which leave red slime and a swampy smell.
Southwest valleys (Gallatin, Madison, Beaverhead, Jefferson, Broadwater, Lewis and Clark, Park and Silver Bow counties) Median about 105 ft in Gallatin and Beaverhead counties to 240 ft in Jefferson County Mountain valleys filled with gravel, and generally good yields. Arsenic and manganese occur naturally, and nitrate is worth watching where homes on septic systems sit close together.
Central Montana and the Hi-Line (Cascade, Fergus, Teton, Hill, Blaine, Phillips and nearby counties) Median about 70 ft in Teton County to 210 ft in Cascade County Shallow river gravels in some places and deeper bedrock in others, so depth and yield swing widely. Around Great Falls, in Cascade County, only about 11% of residents use a well.
Eastern plains (Fallon, Powder River, Prairie, Carter, Custer, Wibaux, Musselshell and nearby counties) Median about 275 to 550 ft, deepest in the state Wells reach down into sandstone and coal beds. Test sulfate, sodium and total dissolved solids before you choose any treatment.

Depth depends on where you are. State well records in GWIC put the county median for household wells drilled since 1990 at about 40 feet in Yellowstone County, where many wells tap shallow gravel along the river, and about 550 feet in Fallon County. Each county page below shows the local number.

What to test for

This follows the advice from Montana State University Extension and its Well Educated program, which has worked with more than 10,000 Montana well owners since 2005.

Test How often Who needs it
Coliform bacteria (total coliform and E. coli) and nitrate Every year, ideally in spring when the ground is wet Every well
A full panel: bacteria, nitrate, arsenic, uranium, manganese, fluoride, selenium, lead, copper, hardness and total dissolved solids Once, the first time you test Every new well, and any well you just bought
Arsenic, uranium and manganese Again if the first test was close to a limit Every well, since arsenic and uranium occur naturally in parts of Montana
Sulfate, sodium and total dissolved solids With the first test Eastern plains wells, and before you buy a water treatment system
Iron bacteria and sulfur bacteria When the water smells or leaves slime Wells with red or black stains, or a rotten egg smell
Bacteria and nitrate right away Before a pregnancy, or when a baby under 6 months starts drinking the water Homes with an infant
Bacteria retest After flooding, well or pump work, or a change in taste, color or smell Every well

Why bacteria gets top billing: MSU’s Well Educated program has found total coliform in about 25% of private well samples and E. coli in about 3%. Nitrate came in over the drinking water limit in about 3%, and arsenic and manganese topped health limits in about 10% of wells. You can’t taste or smell any of them. If a result comes back high, our arsenic guide, uranium guide and shock chlorination calculator walk you through the next step.

Certified labs

You have three good routes in Montana, depending on how much you want tested:

Option Best for Cost
The State Environmental Laboratory in Helena A yearly bacteria and nitrate check by mail or courier, plus metals and uranium screens $25 for bacteria, $55 for bacteria plus nitrate, $135 for the metals screen with arsenic and uranium
A certified lab near you Bacteria samples you can drive in the same day, and home loan tests Varies by lab, so call for a quote
MSU Well Educated A full panel with results explained, through your county Extension office Reduced cost clinics, such as $125 for a full panel in Park County

Bacteria samples don’t keep, so most labs want them back within a day of sampling. Call ahead before a Friday drop off, since some labs charge extra for bacteria samples at the end of the week. Well Educated is great for understanding your water. For a home sale or a loan, use a certified lab.

The labs below are on the DPHHS list of certified drinking water labs, checked October 2026. Montana labs are in Helena, Billings, Bozeman, Kalispell, Missoula, Great Falls, Lewistown and Ravalli. Out-of-state labs on the list are included too, and each profile shows what it is certified to test.

See all 28 certified labs in Montana

Licensed well drillers

Three things to know before you hire in Montana:

  • The license belongs to the person. A water well contractor can run the business and drill. A water well driller drills too. A monitoring well constructor only builds environmental monitoring wells, so that license alone won’t get you a home well.
  • Licenses renew every June 30. Each licensee needs a $25,000 bond and 4 hours of continuing education a year, and a license not renewed by August 1 is revoked.
  • Look at the track record. Every new well log goes into GWIC. Each profile below shows how many household wells the company has logged there since 2010 and the counties it works in most.

The profiles come from the Board’s licensee list dated August 25, 2026, with well counts from GWIC. We left out firms whose people hold only monitoring well licenses, along with government agencies. Firms based in nearby states are included when they’re licensed in Montana and have drilled here.

See all 104 licensed contractors in Montana

By county

The share of residents on a well changes a lot from county to county:

  • Very few residents: Toole (4%), Cascade (11%), Yellowstone (11%) and Silver Bow (12%) counties, where most people are on city water
  • A quarter to a third: Missoula (25%), Lewis and Clark (32%) and Flathead (36%) counties. Flathead and Missoula have the most well users in the state, about 32,700 and 27,400 people.
  • Most residents: Prairie (76%), Garfield (65%), McCone (65%), Mineral (64%) and Ravalli (64%) counties

Each county page has its well population, the typical depth of household wells from GWIC, and the certified labs and licensed drillers nearby.

Montana well water questions

Do I need a permit to drill a well in Montana?

Not a drilling permit from the state. You do need a water right. For a home well of 35 gallons per minute or less, file a Notice of Intent (Form 602I, $400) with DNRC, then a Notice of Completion (Form 602) once the water is in use. Check with your county too, since some issue their own well permits.

Can I drill my own well in Montana?

Yes, on land you own or lease and use as your home or for farming or ranching. You need a permit from the Board of Water Well Contractors first, and the well has to meet the Board’s construction standards.

What changed for exempt wells in 2026?

Starting January 1, 2026, you file a Notice of Intent on Form 602I before you put the water to use. Before that, you only filed Form 602 within 60 days after the well went into use. Once DNRC authorizes the notice, you have five years to finish and file Form 602.

Is a water test required when I sell my house in Montana?

No, the state doesn’t require one. Buyers often ask for a bacteria and nitrate test, and some lenders require one before closing. The State Environmental Laboratory offers a HUD/FHA test for $90.

Where do I get my well water tested in Montana?

At a lab certified by DPHHS. The State Environmental Laboratory in Helena takes private well samples by mail, by courier or in person, at (406) 444-2642. The list above shows every certified lab, and MSU’s Well Educated program runs reduced cost testing through county Extension offices.

How often should I test my well in Montana?

MSU Extension says every year for coliform bacteria and nitrate, plus a full panel the first time you test. Test sooner after a flood, well work, an illness that might come from the water, or when someone pregnant or a baby will be drinking it.

How deep are wells in Montana?

It depends on the county. State well records in GWIC put the median household well drilled since 1990 at about 40 feet in Yellowstone County, the shallowest. Fallon County is the deepest, at about 550 feet. Logs of nearby wells are the best guide to yours.

How do I find the log for my well?

Search the Ground Water Information Center at MBMG by location, owner name or GWIC ID. The log shows the depth, casing, water level and yield the driller recorded. Our well record finder links straight to it.