Montana county well guide

Well Water in Flathead County, MT: Testing, Contractors and Rules

About 32,700 people in Flathead County, 36% of residents, get their water from a private well. Nobody tests that water unless the owner does.

36%of residents on a private well
Share on private wells
Flathead County36%
Montana29%
23licensed contractors serve the county
3 mito the nearest certified lab that takes homeowner samples, Montana Environmental Laboratory
Nostatewide test required when a home is sold

Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.

The U.S. Geological Survey's 2010 estimate puts the number of Flathead County residents on private wells at about 32,700, or 36%, above the Montana figure of 29%. State well records list 13,093 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990, with a median depth of 220 feet. Nobody tests, treats or inspects that water unless the owner does.

Local rules for wells in Flathead County

The rules that apply in Flathead County are set at the state level in Montana. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.

At a glance

Water test for a new wellNot required statewide

No state water test. A home well needs a water right filing with DNRC (Form 602I Notice of Intent, $400, then Form 602) and a driller licensed by the Board of Water Well Contractors, who files the well log with GWIC within 60 days. Some counties, such as Missoula, issue their own well permits.

Water test when a home is soldNot required statewide

No state requirement. Buyers often ask for a bacteria and nitrate test, and some lenders require one. The State Environmental Laboratory runs a HUD/FHA test for $90.

What the state recommends

Every year: coliform bacteria and nitrate, ideally in spring. First test: a full panel with arsenic, uranium, manganese, fluoride, selenium, lead, copper, hardness and total dissolved solids (MSU Extension). See the full list by region below.

Free or low-cost testingAvailable

No free statewide program. MSU Well Educated runs reduced cost testing through county Extension offices (for example, a full panel for $125 in Park County), and the State Environmental Laboratory tests bacteria for $25.

Getting your water tested near Flathead County

The nearest certified lab that takes samples from homeowners is Montana Environmental Laboratory in Kalispell, about 3 miles from the county's population center. 1 certified lab is within 40 miles in all. One of them says it takes samples from homeowners.

Licensed well contractors serving Flathead County

Licensed help in Flathead County includes Ace Drilling and Allwest Drilling (Evensix, Inc.) and 21 others. Every listing was matched to the Montana license list; the "verify" link on each profile opens the state lookup.

Well depth and water chemistry

In state well records, the median household well in Flathead County is 220 feet deep, and the middle half run 150 to 340 feet (13,093 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990). Contaminants worth testing for in this part of Montana include coliform bacteria, arsenic, manganese, and uranium. A first full panel tells you which of them apply to your well.

Typical well depth
Median well220 ft
Most wells150 to 340 ft
Based on13,093 wells

Household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990. "Most wells" is the middle half.

Contaminants to test for
  • Coliform bacteriaAbout 1 in 4 well samples
  • ArsenicNaturally occurring
  • ManganeseNaturally occurring
  • UraniumNaturally occurring
  • NitrateSeptic systems and farming
  • Fluoride
  • Selenium
  • Iron and iron bacteria
  • Sulfate and total dissolved solidsEastern plains

Neighboring counties: Lake County, Sanders County, Lincoln County, Mineral County.

Typical well costs: national price ranges

Bacteria test (coliform and E. coli)$10 to $60state, county and university lab fees
Nitrate test$10 to $80varies by lab; ask when you order
Broad panel (metals and minerals)$85 to $450state and university lab packages
Well inspection$250 to $550$350 to $900 with water testing
Submersible pump replacement$1,000 to $2,500installed; deep wells cost more
Pressure tank replacement$800 to $1,500installed
One treatment unit$700 to $3,500softener, iron filter or UV, installed
Multi-stage whole-house treatment$2,500 to $10,000+several units or whole-house RO, installed
New well, complete$6,000 to $16,000typical 200 ft well with pump; drilling alone about $20 to $30 per foot; deeper wells cost more
Shock chlorination$80 to $200by a contractor; under $30 to do yourself

Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: HomeGuide cost guides, Angi: cost to shock a well.

Questions Flathead County well owners ask

How many people in Flathead County use a private well?

The U.S. Geological Survey estimates about 32,700 people, 36% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 13,093 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990.

Where is the closest certified lab to Flathead County?

Montana Environmental Laboratory in Kalispell, about 3 miles from the county's population center. It says it accepts samples from homeowners.

Do I need a permit to drill a well in Flathead County?

No state water test. A home well needs a water right filing with DNRC (Form 602I Notice of Intent, $400, then Form 602) and a driller licensed by the Board of Water Well Contractors, who files the well log with GWIC within 60 days. Some counties, such as Missoula, issue their own well permits.

What does a well test cost near Flathead County?

Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Mail-in kits cost about the same as walking in.