Chemtech – Ford Laboratories
- Certification
- State certified list checked September 29, 2026
- Certificate
- UT00027 Colorado program
- Tests listed
- 7 Arsenic and more
- Homeowner samples
- Yes Mail-in
About Chemtech – Ford Laboratories
Chemtech – Ford Laboratories is a commercial laboratory in Sandy, UT (Salt Lake County). It is on the Colorado drinking water program's list of certified laboratories (certificate UT00027), and we last checked the list on September 29, 2026.
The lab takes samples from homeowners and ships mail-in sample kits.
Certified by the Colorado Department of Public Health and Environment (certification UT00027). Listed by CDPHE as accepting outside samples. Certified analytes: Nitrite-N, Nonafluoro-3,6-dioxaheptanoic acid, Uranium, Bromoacetic Acid, Nickel, Chlorite, Vinyl Chloride, Endrin, Barium, Thallium, Cadmium, 1H,1H, 2H, 2H-Perfluorooctane sulfonic acid, 1H,1H, 2H, 2H-Perfluorodecane sulfonic acid, 9-Chlorohexadecafluoro-3-oxanonane-1-sulfonic acid, 1H,1H, 2H, 2H-Perfluorohexane sulfonic acid, Perfluoroundecanoic acid, Nitrate-N, Copper, Selenium, Bromoform, Perfluoroheptanoic acid, Perfluorooctanoic acid, Dichloroacetic Acid, Perfluorodecanoic acid, Trichloroacetic Acid, 11-Chloroeicosafluoro-3-oxaundecane-1-sulfonic acid, Trichloroethylene, Perfluorobutanoic acid, Mercury, Beryllium, Bis-(2-ethylhexyl) Phthalate, t-1,2-Dichloroethylene, Styrene, Perfluorododecanoic acid, Dibromoacetic Acid, Chromium, Toxaphene, Bis-(2-ethylhexyl) Adipate, Perfluoro(2-ethoxyethane)sulfonic acid, Antimony, 1,1,1-Trichloroethane, Dichloromethane, 1,2-Dichloropropane, Chlorodibromomethane, Heptachlor, Perfluoro-4-methoxybutanoic acid, Perfluorohexanesulfonic acid, 2,4,5-TP (Silvex), 2,4-D, Oxamyl (Vydate), Carbofuran, Arsenic, Perfluorobutanesulfonic acid, Simazine, Gamma-BHC (Lindane), 1,1-Dichloroethylene, Methoxychlor, Heptachlor Epoxide, Perfluoropentanoic acid, Perfluorononanoic acid, Perfluoro-3-methoxypropanoic acid, Total Cyanide, 1,2,4-Trichlorobenzene, Total Xylenes, 1,2-Dichlorobenzene, Hexachlorocyclopentadiene, Perfluorooctanesulfonic acid, Picloram, Benzo(a)pyrene, Ethylbenzene, Lead, Toluene, Total Organic Carbon, Turbidity, 1,1,2-Trichloroethan.
This profile is built from the official state list of certified drinking water laboratories, checked on September 29, 2026. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.
Certification and services
State certified- Certification number
- UT00027
- Certified by
- Colorado drinking water program
- Certified for
- Chemical
- Lab type
- Commercial
- Last verified
- September 29, 2026
Listed on the official state certified laboratory list.
How to test your water here
How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.
Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Prices at this lab may differ.
- 1
Call for the right bottles
Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.
- 2
Collect from a cold tap before treatment
Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.
- 3
Keep it cold and deliver within 24 hours
Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.
- 4
Read the report against the standards
Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.
Tests this lab is listed for
From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.
Arsenic
Natural in some bedrock, with no taste or smell. The EPA limit is 0.010 mg/L. Learn more
Lead
Usually from plumbing and older well parts. EPA says there is no safe level. Learn more
Nitrate / Nitrite
From fertilizer, manure and septic systems. The EPA limit is 10 mg/L as nitrogen. Learn more
Pesticides
Farm and lawn chemicals that can reach shallow wells.
PFAS
Forever chemicals. EPA set limits of 4 parts per trillion for PFOA and PFOS. Learn more
Uranium
Natural in granite and some other rock. The EPA limit is 0.030 mg/L. Learn more
Volatile Organic Compounds
Fuel and solvent chemicals from spills and leaking tanks. Learn more
Location
Sandy, UT
Approximate location
Questions about Chemtech – Ford Laboratories
Is Chemtech – Ford Laboratories state certified?
Yes. It is on the Colorado list of laboratories certified for drinking water testing, last checked September 29, 2026.
What can Chemtech – Ford Laboratories test well water for?
Its listing covers arsenic, lead, nitrate / nitrite, pesticides, pfas, uranium and volatile organic compounds. Call to confirm prices and which tests it runs for private well owners.
Can I bring my own well water sample?
Yes, the listing says it takes homeowner samples and ships mail-in kits. Get the right bottle from the lab first, especially for bacteria.
How do I contact Chemtech – Ford Laboratories?
Call (801) 262-7299 and visit the lab's website.

