State-certified labTakes homeowner samples

SGS North America Inc. – Dayton

Dayton, NJ · Middlesex CountyCommercial laboratory

Certification
State certified
list checked June 11, 2024
Certified in
3 states
PA, CO and AZ
Tests listed
4
Arsenic and more
Homeowner samples
Yes
Mail-in

About SGS North America Inc. – Dayton

SGS North America Inc. – Dayton is a commercial laboratory in Dayton, NJ (Middlesex County). It is on the Pennsylvania, Colorado and Arizona drinking water programs' list of certified laboratories, and we last checked the list on June 11, 2024.

The lab takes samples from homeowners and ships mail-in sample kits.

Accredited by the Pennsylvania Department of Environmental Protection Bureau of Laboratories (lab ID 68-00408) for drinking water analysis. Accredited analytes: .

This profile is built from the official state list of certified drinking water laboratories, checked on June 11, 2024. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.

Certification and services

State certified
Certified by
Pennsylvania, Colorado and Arizona drinking water programs
Lab type
Commercial
Last verified
June 11, 2024

Certifications

  • Pennsylvania: No. 68-00408 · chem · checked Jun 11, 2024 source
  • Colorado: No. NJ00141 · chem · checked Sep 29, 2026 source
  • Arizona: No. AZ0786 · Drinking water · checked Oct 8, 2026 source

Listed on the official state certified laboratory list.

How to test your water here

How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.

Homeowner samplesYou can collect and drop off your own sample
Mail-in kitsBottles shipped to you, sample shipped back
Walk-in drop offNot listed, call to confirm

Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Prices at this lab may differ.

  1. 1

    Call for the right bottles

    Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.

  2. 2

    Collect from a cold tap before treatment

    Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.

  3. 3

    Keep it cold and deliver within 24 hours

    Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.

  4. 4

    Read the report against the standards

    Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.

Tests this lab is listed for

From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.

Arsenic

Natural in some bedrock, with no taste or smell. The EPA limit is 0.010 mg/L. Learn more

Lead

Usually from plumbing and older well parts. EPA says there is no safe level. Learn more

PFAS

Forever chemicals. EPA set limits of 4 parts per trillion for PFOA and PFOS. Learn more

Volatile Organic Compounds

Fuel and solvent chemicals from spills and leaking tanks. Learn more

Location

2235 US Route 130, Dayton, NJ 08810

Lab address

Questions about SGS North America Inc. – Dayton

Is SGS North America Inc. – Dayton state certified?

Yes. It is on the Pennsylvania, Colorado and Arizona list of laboratories certified for drinking water testing, last checked June 11, 2024.

What can SGS North America Inc. – Dayton test well water for?

Its listing covers arsenic, lead, pfas and volatile organic compounds. Call to confirm prices and which tests it runs for private well owners.

Can I bring my own well water sample?

Yes, the listing says it takes homeowner samples and ships mail-in kits. Get the right bottle from the lab first, especially for bacteria.

How do I contact SGS North America Inc. – Dayton?

Call (732) 329-0200 and visit the lab's website. The address is 2235 US Route 130, Dayton, NJ 08810.

Other certified labs nearby