Mohave Environmental Labs (Holbrook)
Homeowner samples
- Arsenic
- Coliform Bacteria
- Full Homeowner Panel
- Hardness
- Lead
- Nitrate / Nitrite
About 13,900 people in Navajo County, 13% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.
Private wells serve a minority in Navajo County: about 13,900 people, 13% of residents, by the U.S. Geological Survey's 2010 estimate, well above the Arizona figure of 4%. State well records list 2,147 household wells in the ADWR Well Registry drilled since 1990, with a median depth of 380 feet. If yours is one of them, testing and upkeep are up to you.
The rules that apply in Navajo County are set at the state level in Arizona. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
No state water test. ADWR requires a Notice of Intention to Drill ($100 for most home wells) and a licensed driller, and on lots of 5 acres or less the county or local health department signs off on the notice.
No state requirement. The standard real estate well addendum has the buyer's inspector test the water only if water quality matters to the buyer, and escrow files the change of well ownership with ADWR. Some lenders require a test.
New wells: arsenic, coliform bacteria, fluoride, lead, nitrate, total dissolved solids and uranium. Every year: coliform bacteria and nitrate. Every 5 years: arsenic, fluoride and uranium (ADHS). See the full list by region below.
No statewide free program. Testing is done by ADHS licensed commercial labs; a bacteria test runs about $55 at one lab.
The nearest certified lab that takes samples from homeowners is Mohave Environmental Labs (Holbrook) in Holbrook, about 4 miles from the county's population center. 2 certified labs are within 40 miles in all. One of them says it takes samples from homeowners.
2 certified labs within 40 miles of this county
Homeowner samples
Licensed help in Navajo County includes A to Z Drilling & Pump Service, LLC and Copperstate Drilling & Supply, Inc and 2 others. Every listing was matched to the Arizona license list; the "verify" link on each profile opens the state lookup.
4 licensed contractors
License 12 Active
License 41 Active
License 780 Active
License 453 Active
In state well records, the median household well in Navajo County is 380 feet deep, and the middle half run 280 to 480 feet (2,147 household wells in the ADWR Well Registry drilled since 1990). Contaminants worth testing for in this part of Arizona include arsenic, fluoride, uranium, and nitrate. A first full panel tells you which of them apply to your well.
Household wells in the ADWR Well Registry drilled since 1990. "Most wells" is the middle half.
Neighboring counties: Apache County, Gila County, Coconino County, Yavapai County.
Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 13,900 people, 13% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 2,147 household wells in the ADWR Well Registry drilled since 1990.
Mohave Environmental Labs (Holbrook) in Holbrook, about 4 miles from the county's population center. It says it accepts samples from homeowners.
No state water test. ADWR requires a Notice of Intention to Drill ($100 for most home wells) and a licensed driller, and on lots of 5 acres or less the county or local health department signs off on the notice.
Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Mail-in kits cost about the same as walking in.