State-certified labTakes homeowner samples

Mohave Environmental Labs (Holbrook)

Holbrook, AZ · Navajo CountyCommercial laboratory

Certification
State certified
list checked October 8, 2026
Certificate
AZ0037
Arizona program
Tests listed
6
Arsenic and more
Homeowner samples
Yes
Drop-off

About Mohave Environmental Labs (Holbrook)

Mohave Environmental Labs (Holbrook) is a commercial laboratory in Holbrook, AZ (Navajo County). It is on the Arizona drinking water program's list of certified laboratories (certificate AZ0037), and we last checked the list on October 8, 2026.

The lab takes samples from homeowners.

Before you go: This is the Holbrook location of Mohave Environmental Labs, licensed under the same ADHS license as the Bullhead City lab. Prices are from the lab's Residential Water Testing page, checked October 2026.

This profile is built from the official state list of certified drinking water laboratories, checked on October 8, 2026. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.

Certification and services

State certified
Certification number
AZ0037
Certified by
Arizona drinking water program
Certified for
Drinking water
Lab type
Commercial
Turnaround
Rush results in as little as 72 hours
Pricing
Residential well tests on the lab's website: bacteria (total coliform and E. coli) $55; Tier 1 well test $175; Tier 2 $275 (adds lead and arsenic); FHA/VA loan test $140 to $160.
Last verified
October 8, 2026

Listed on the official state certified laboratory list.

How to test your water here

How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.

Homeowner samplesYou can collect and drop off your own sample
Mail-in kitsNot listed, call to confirm
Walk-in drop offNot listed, call to confirm
PricesResidential well tests on the lab's website: bacteria (total coliform and E. coli) $55; Tier 1 well test $175; Tier 2 $275 (adds lead and arsenic); FHA/VA loan test $140 to $160.
TurnaroundRush results in as little as 72 hours

Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Prices at this lab may differ.

  1. 1

    Call for the right bottles

    Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.

  2. 2

    Collect from a cold tap before treatment

    Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.

  3. 3

    Keep it cold and deliver within 24 hours

    Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.

  4. 4

    Read the report against the standards

    Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.

Tests this lab is listed for

From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.

Arsenic

Natural in some bedrock, with no taste or smell. The EPA limit is 0.010 mg/L. Learn more

Coliform Bacteria

Total coliform and E. coli. The test the CDC recommends every year for every private well. Learn more

Full Homeowner Panel

A broad package that usually covers bacteria, nitrate, metals and minerals. Learn more

Hardness

Calcium and magnesium. You need this number to size a water softener. Learn more

Lead

Usually from plumbing and older well parts. EPA says there is no safe level. Learn more

Nitrate / Nitrite

From fertilizer, manure and septic systems. The EPA limit is 10 mg/L as nitrogen. Learn more

Location

200 N. 2nd Street Suite B., Holbrook, AZ 86025

Lab address

Questions about Mohave Environmental Labs (Holbrook)

Is Mohave Environmental Labs (Holbrook) state certified?

Yes. It is on the Arizona list of laboratories certified for drinking water testing, last checked October 8, 2026.

What can Mohave Environmental Labs (Holbrook) test well water for?

Its listing covers arsenic, coliform bacteria, full homeowner panel, hardness, lead and nitrate / nitrite. Call to confirm prices and which tests it runs for private well owners.

Can I bring my own well water sample?

Yes, the listing says it takes homeowner samples. Get the right bottle from the lab first, especially for bacteria.

How do I contact Mohave Environmental Labs (Holbrook)?

Call (928) 754-8101 and visit the lab's website. The address is 200 N. 2nd Street Suite B., Holbrook, AZ 86025.

Other certified labs nearby