Montana Environmental Laboratory
About 75 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples · Walk-in
- Arsenic
- Coliform Bacteria
- Full Homeowner Panel
- Hardness
- Iron and Manganese
- Lead
- Nitrate / Nitrite
About 3,200 people in Glacier County, 24% of residents, get their water from a private well. Nobody tests that water unless the owner does.
Well figures: USGS estimate, 2010, and state well records. Labs and contractors: state certification and license lists.
The U.S. Geological Survey's 2010 estimate puts the number of Glacier County residents on private wells at about 3,200, or 24%, close to the Montana figure of 29%. State well records list 311 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990, with a median depth of 100 feet. Nobody tests, treats or inspects that water unless the owner does.
The rules that apply in Glacier County are set at the state level in Montana. The state does not require a test on a new well, and nothing is required at sale. Some counties and townships add permits or setbacks of their own, so check locally before drilling. The state's own recommendations are below.
No state water test. A home well needs a water right filing with DNRC (Form 602I Notice of Intent, $400, then Form 602) and a driller licensed by the Board of Water Well Contractors, who files the well log with GWIC within 60 days. Some counties, such as Missoula, issue their own well permits.
No state requirement. Buyers often ask for a bacteria and nitrate test, and some lenders require one. The State Environmental Laboratory runs a HUD/FHA test for $90.
Every year: coliform bacteria and nitrate, ideally in spring. First test: a full panel with arsenic, uranium, manganese, fluoride, selenium, lead, copper, hardness and total dissolved solids (MSU Extension). See the full list by region below.
No free statewide program. MSU Well Educated runs reduced cost testing through county Extension offices (for example, a full panel for $125 in Park County), and the State Environmental Laboratory tests bacteria for $25.
No state-certified lab sits within 40 miles of Glacier County, which is common in rural Montana. To give you options anyway, the list below shows the 6 closest certified labs, 75 to 134 miles away, with the distance on each one. The nearest that takes samples from homeowners is Montana Environmental Laboratory in Kalispell, about 75 miles away. At that distance a mail-in kit is the practical route: the lab ships bottles, you sample at the cold kitchen tap and send them back the same day with an ice pack.
6 certified labs, the closest to this county (none within 40 miles)
About 75 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples · Walk-in
About 104 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples · Walk-in
About 112 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples · Mail-in kits · Walk-in
About 131 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples · Walk-in
About 134 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples · Walk-in
About 134 miles away, outside the 40-mile range. Ask about mail-in sample kits.
Homeowner samples · Walk-in
Licensed help in Glacier County includes 406 Water Wells, LLC and Allwest Drilling (Evensix, Inc.) and 6 others. Every listing was matched to the Montana license list; the "verify" link on each profile opens the state lookup.
8 licensed contractors
In state well records, the median household well in Glacier County is 100 feet deep, and the middle half run 70 to 160 feet (311 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990). Contaminants worth testing for in this part of Montana include coliform bacteria, arsenic, manganese, and uranium. A first full panel tells you which of them apply to your well.
Household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990. "Most wells" is the middle half.
Neighboring counties: Pondera County, Toole County, Teton County, Flathead County.
Installed costs are national 2026 ranges; local quotes vary with depth, access and materials. Sources, checked September 2026: HomeGuide cost guides, Angi: cost to shock a well.
The U.S. Geological Survey estimates about 3,200 people, 24% of residents, in 2010. That is the most recent county-level estimate. The 1990 Census was the last time every household was asked where its water comes from, so newer figures are modeled from census housing data. State well records add a second view: 311 household wells in the Montana Ground Water Information Center (GWIC) drilled since 1990.
Montana Environmental Laboratory in Kalispell, about 75 miles from the county's population center. It says it accepts samples from homeowners. Nothing is closer than 40 miles, so ask about mail-in kits.
No state water test. A home well needs a water right filing with DNRC (Form 602I Notice of Intent, $400, then Form 602) and a driller licensed by the Board of Water Well Contractors, who files the well log with GWIC within 60 days. Some counties, such as Missoula, issue their own well permits.
Bacteria tests cost about $10 to $60 at state, county and university labs, nitrate about $10 to $80, and a broad panel with metals about $85 to $450. Mail-in kits cost about the same as walking in.