Private well guide

Well Water in Florida: Testing, Rules, Labs and Licensed Contractors

About 1,928,000 people in Florida get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

902Licensed contractorschecked against state records
63Certified labsfrom the state certified list
67Counties covered
1,928,000People on private wells10% of residents (USGS, 2010)

The short version: About 1.9 million Floridians, 10% of residents, drink from a private well (USGS estimate, 2010). That is one of the largest well populations in the country. Florida watches the drilling closely and tests wells near known contamination for free. Everywhere else, the water is left to the owner.

Florida at a glance
Permit to drill a home well Yes, always, from your water management district or the county health department acting for it
Who can drill it A water well contractor licensed through one of the water management districts
Water test for a new well Not required statewide. Required inside delineated contamination areas, and 12 counties have local rules that require testing
Water test when a home sells Not required statewide (some lenders ask for one)
Most common failed test Coliform bacteria and nitrate, mostly in shallow surficial wells
Typical household well depth Varies widely across the state. Logs of nearby wells are the best guide
Where to test Your county health department, or a lab certified by the Department of Health

Who is in charge of a Florida well

The Department of Environmental Protection writes the rules, but it hands the day-to-day work to others. Here’s who does what:

Agency What it handles
Department of Environmental Protection (DEP) Writes the well rules and hands the day-to-day work to the five water management districts
The five water management districts Issue the construction permit every new, repaired or abandoned well needs, license the contractor who drills it and keep the completion report. In counties like Hillsborough, Pinellas, Polk and Sarasota, the county health department does this for the district
Department of Health (DOH) and the county health departments Certifies the labs, sells bacteria and nitrate tests through the county health departments, and samples private wells near known contamination through its Well Surveillance Program

If your well is in one of the delineated areas under Chapter 62-524, mostly old farmland with ethylene dibromide or industrial plumes, the health department is also the permitting office. There, the water is sampled before you are allowed to use it.

What is required, and what is left to you

Florida keeps a close eye on how a well is built. Every new well needs:

  • A permit before drilling. It comes from your water management district or, where the district has delegated the job, the county health department.
  • A licensed water well contractor. The contractor normally pulls the permit too.
  • Construction to the state standards. Chapter 62-532 covers grouted casing and disinfection, and Department of Health Rule 64E-8 keeps the well 75 feet from a septic system.
  • A completion report filed by the driller with the district.

Outside the delineated areas, the state doesn’t sample a new well, and no test is required when a home is sold. A few counties go further: Brevard, Broward, Citrus, Duval, Flagler, Highlands, Hillsborough, Osceola, Palm Beach, Pinellas, Sarasota and Volusia have local rules that require testing for new wells or repairs. After a hurricane or a flood that reached the wellhead, disinfect the well and test again before drinking from it. Here’s where the state stands:

At a glance

Water test for a new wellNot required statewide

No statewide water test for a new well. What is required is a well construction permit from your water management district (or the county health department where the district has delegated permitting) before drilling, a licensed water well contractor, construction to the Chapter 62-532 standards (grouted casing, disinfection) with the Department of Health setback of 75 feet from a septic system (Rule 64E-8) and a completion report from the driller. The exception is a delineated area under Chapter 62-524: where groundwater is known to be contaminated, a new drinking water well needs a permit through the county health department and the water is sampled and cleared before the well is used.

Water test when a home is soldNot required statewide

No statewide requirement. Some lenders require a water test before closing, and buyers of homes in delineated contamination areas should ask the county health department for the well's file.

What the state recommends

The Florida Department of Health recommends a coliform bacteria and nitrate test at least once a year and a lead test every three years, plus arsenic, ethylene dibromide and naturally occurring radionuclides where the county health department advises it. Add hardness, iron, sulfide, sodium and chloride on a first test, and test again after flooding, a hurricane, repairs or any change in taste, color or smell.

Free or low-cost testingAvailable

The Department of Health's Well Surveillance Program samples private wells near known contamination sites free of charge and notifies owners of the results; if your well is inside a delineated area you may already be on the list. Elsewhere, county health departments give out bottles and instructions and test bacteria and nitrate for about $20 to $30 a sample, or $30 to $40 more if staff collect it.

What the water is like in each part of Florida

Most of Florida draws from the Floridan aquifer, but not all of it. Find your area below.

Region What to expect
North and central Florida (Floridan aquifer) A thick limestone that gives plenty of hard water, with a sulfur smell in many places.
Central Florida phosphate belt and former farmland The phosphate belt adds radium and radon. Former citrus and cattle land adds arsenic and ethylene dibromide, and arsenic also shows up near old cattle dip vats and golf courses.
Panhandle, Suwannee valley and southwest coast (surficial aquifer) Shallow wells with softer water, but iron and tannins, and the bacteria and nitrate that fail most tests. The nitrate problem is worst in the springs country along the Suwannee.
Southeast Florida (Biscayne aquifer under Miami-Dade, Broward and Palm Beach) Shallow and porous, which is why the region has so many delineated areas.

Depth varies widely across the state, and logs of nearby wells are the best guide. Your water management district keeps the completion reports, and our well record lookup points you to them. Every coastal county also has wells that turn salty as they are pumped. A broad first test sorts out which of these problems applies to you.

What to test for

This combines the Department of Health schedule with testing advice from UF/IFAS Extension.

Test How often Who needs it
Coliform bacteria and nitrate At least once a year Every well
Lead Every 3 years Every well
Hardness, iron, sulfide, sodium and chloride With the first test Every new well, and any well you just bought
Arsenic, ethylene dibromide and naturally occurring radionuclides When your county health department advises it Former citrus, cattle and farm land, and the central Florida phosphate district
Chloride, sodium and total dissolved solids When the water tastes salty or pipes corrode Coastal wells
Fuel components and VOCs With the first test, or if the water smells like fuel Wells near gas stations, buried tanks, landfills or factories
Nitrate right away Early in a pregnancy, before a baby comes home and during the baby’s first 6 months Homes with a pregnancy or an infant
Bacteria retest 5 to 10 days after you shock chlorinate Any well that tested positive
Full retest After a hurricane, flooding, repairs, or a change in taste, color or smell Every well

Why local contamination gets top billing: since 2005, the Well Surveillance Program has sampled more than 54,500 wells near known or suspected contamination, and more than 5,700 of them came in above state or federal standards. That’s about 1 in 10. Ask your county health department what’s been found near you, and for ethylene dibromide the test is free if the county thinks it was used near your property. If a result comes back bad, our coliform bacteria guide, arsenic guide and shock chlorination calculator walk you through the next steps.

FDOH-certified labs and county health departments

You have three ways to get tested in Florida:

Option Best for Cost
County health department The yearly bacteria and nitrate check. Staff hand out bottles and send the sample to a certified lab About $20 to $30 a sample, or $30 to $40 more if staff collect it
Certified commercial lab A first-time panel, arsenic, radium, EDB or PFAS Varies by lab
Well Surveillance Program Wells near known contamination, including delineated areas Free

The Well Surveillance Program samples private wells near known contamination sites and tells owners the results. If your well is inside a delineated area, you may already be on the list. For everything else, your county health department can explain how to collect the sample, where to send it and what the result means. UF/IFAS Extension’s Florida Well Owner Network also holds free screenings at county workshops now and then.

Florida certifies environmental labs through the Department of Health’s Environmental Laboratory Certification Program, which is part of the national NELAP system. The labs below hold current drinking water certification for at least the tests a well owner needs, and most of the commercial labs mail bottles anywhere in the state.

See all 63 certified labs in Florida

Licensed water well contractors

Three things to know before you hire in Florida:

  • Florida licenses the person, not the company. Each contractor holds a state water well contractor license issued through one of the water management districts.
  • The license doesn’t cover pumps. It covers drilling, repair and abandonment of wells. The same companies do pump work, but it isn’t part of the state license.
  • Check for restrictions. Some licenses carry a restriction on the state record, and those are flagged on the profile.

Every contractor below is a person holding a current state water well contractor license, shown under the business they work for where the state record names one.

See all 902 licensed contractors in Florida

By county

Well use swings hard across the state:

  • Almost nobody: about 1% of residents in Pinellas and Broward counties, and 2% in Miami-Dade
  • About one in five: Highlands (20%), Bay (22%) and Franklin (22%) counties
  • Two in three or more: Suwannee (67%), Baker (69%), Dixie (72%), Lafayette (78%) and Gilchrist (82%) counties

Each county page carries its well population, the nearest certified labs and the licensed contractors based there.

Florida well water questions

Do I need a permit to drill a well in Florida?

Yes, always. The permit comes from your water management district or, where the district has delegated the job, the county health department. Your licensed contractor normally pulls it. Drilling without one is a violation for the contractor and can leave you with a well the county will not accept.

Is a water test required when I sell my house in Florida?

No. Florida has no statewide requirement. Some lenders require a water test before closing. If the home is in a delineated contamination area, ask the county health department for the well’s file.

How often should I test my well in Florida?

The Department of Health recommends coliform bacteria and nitrate at least once a year and lead every 3 years. Add arsenic, ethylene dibromide or radionuclides if your county health department advises it. Test again after a hurricane, flooding, repairs or any change in taste, color or smell.

What is a delineated area?

A mapped area where groundwater is known to be contaminated, usually by ethylene dibromide from old farmland or by an industrial plume. Inside one, a new drinking water well needs a permit through the county health department, the water is tested before use, and the state may require a filter or a connection to public water instead. The Department of Health’s Well Surveillance Program tests existing wells in these areas for free.

How do I find the record for my well?

Well completion reports are filed with the water management district that permitted the well. Each district has an online permit search. Start from the FDEP well permitting page, pick your district and search by address or parcel. Wells drilled before the 1980s often have no record.

Which lab should I use?

Any lab on the FDOH certified list with drinking water scope. Use the county health department for the yearly bacteria and nitrate check and a commercial lab for the wider panel.