State-certified lab

Microbac Laboratories, Inc. – Pittston

Pittston, PA · Luzerne CountyCommercial laboratory

Certification
State certified
list checked June 11, 2024
Certificate
35-05082
Pennsylvania program
Tests listed
4
Coliform Bacteria and more
Homeowner samples
Call to ask
not listed on the record

About Microbac Laboratories, Inc. – Pittston

Microbac Laboratories, Inc. – Pittston is a commercial laboratory in Pittston, PA (Luzerne County). It is on the Pennsylvania drinking water program's list of certified laboratories (certificate 35-05082), and we last checked the list on June 11, 2024.

The record does not say whether it takes samples from homeowners. Some certified labs only work with public water systems, so call before you collect a sample.

Accredited by the Pennsylvania Department of Environmental Protection Bureau of Laboratories (lab ID 35-05082) for drinking water analysis. Accredited analytes: Turbidity, Aluminum, Barium, Boron, Cadmium, Calcium, Chromium, Copper, Iron, Magnesium, Manganese, Molybdenum, Nickel, Potassium, Sodium, Vanadium, Zinc, Cyanide, Nitrate as N, Nitrite as N, Phosphorus, total, Orthophosphate as P, 1,1,1,2-Tetrachloroethane, 1,1,1-Trichloroethane, 1,1,2,2-Tetrachloroethane, 1,1,2-Trichloroethane, 1,1-Dichloroethane, 1,1-Dichloropropene, 1,2,3-Trichlorobenzene, 1,2,3-Trichloropropane (1,2,3-TCP), 1,2,4-Trichlorobenzene, 1,2,4-Trimethylbenzene, 1,2-Dichloroethane, 1,2-Dichloropropane, 1,3,5-Trimethylbenzene, 1,3-Dichloropropane, 2,2-Dichloropropane, 2-Chlorotoluene, 4-Chlorotoluene, Benzene, Bromobenzene, Bromochloromethane, Bromodichloromethane, Bromoform, Carbon tetrachloride, Chlorobenzene, Chloroethane, Chloroform, Dibromochloromethane, Dibromomethane, Dichlorodifluoromethane (Freon 12), Ethylbenzene, Isopropylbenzene (Cumene), Methyl bromide (Bromomethane), Methyl chloride (Chloromethane), Methyl tert-butyl ether (MTBE), Methylene chloride (Dichloromethane), Naphthalene, Styrene, Toluene, Total trihalomethanes (TTHMs), Trichlorofluoromethane (Freon 11), Vinyl chloride (Chloroethene), Xylenes, total, cis-1,2-Dichloroethene, cis-1,3-Dichloropropene, n-Butylbenzene, n-Propylbenzene, p-Isopropyltoluene (4-Isopropyltoluene), sec-Butylbenzene, tert-Butylbenzene, trans-1,2-Dichloroethene, trans-1,3-Dichloropropene, Chemical oxygen demand (COD), Color, Odor, Acidity as CaCO3, Alkalinity as CaCO3, Conductivity, Residue, total, Residue, filterable (.

This profile is built from the official state list of certified drinking water laboratories, checked on June 11, 2024. Well Water Insider does not rate or endorse labs. Run this lab? Claim the profile to add prices, turnaround times, hours and a description.

Certification and services

State certified
Certification number
35-05082
Certified by
Pennsylvania drinking water program
Certified for
Microbiological, Chemical
Lab type
Commercial
Last verified
June 11, 2024

Listed on the official state certified laboratory list.

How to test your water here

How this lab takes samples, based on its listing. Call to confirm hours, bottles and prices.

Homeowner samplesNot listed, call to confirm
Mail-in kitsNot listed, call to confirm
Walk-in drop offNot listed, call to confirm

Published lab fees in Pennsylvania: $40 for a bacteria test and $15 for nitrate (Penn State drinking water testing). Prices at this lab may differ.

  1. 1

    Call for the right bottles

    Bacteria samples need a sterile bottle from the lab. Chemistry samples usually take a clean container the lab supplies.

  2. 2

    Collect from a cold tap before treatment

    Skip softeners and filters. Remove the aerator, run the water 3 to 5 minutes, then fill without touching the inside of the cap.

  3. 3

    Keep it cold and deliver within 24 hours

    Bacteria samples are time-sensitive. Use a cooler with ice packs and hand it in or ship it the same day.

  4. 4

    Read the report against the standards

    Compare results with EPA drinking water limits. If anything is over, our problem pages explain what it means and how to treat it.

Tests this lab is listed for

From the state certification list and the lab's own listing. Ask which ones it runs for homeowners.

Coliform Bacteria

Total coliform and E. coli. The test the CDC recommends every year for every private well. Learn more

Iron and Manganese

The cause of orange and black stains. EPA guidelines are 0.3 and 0.05 mg/L. Learn more

Nitrate / Nitrite

From fertilizer, manure and septic systems. The EPA limit is 10 mg/L as nitrogen. Learn more

Volatile Organic Compounds

Fuel and solvent chemicals from spills and leaking tanks. Learn more

Location

428 Route 315 Highway, Pittston, PA 18640

Lab address

Questions about Microbac Laboratories, Inc. – Pittston

Is Microbac Laboratories, Inc. – Pittston state certified?

Yes. It is on the Pennsylvania list of laboratories certified for drinking water testing, last checked June 11, 2024.

What can Microbac Laboratories, Inc. – Pittston test well water for?

Its listing covers coliform bacteria, iron and manganese, nitrate / nitrite and volatile organic compounds. Call to confirm prices and which tests it runs for private well owners.

Can I bring my own well water sample?

The listing does not say. Some certified labs only test for public water systems, so call before collecting a sample.

How do I contact Microbac Laboratories, Inc. – Pittston?

Call (570) 348-0775 and visit the lab's website. The address is 428 Route 315 Highway, Pittston, PA 18640.

Other certified labs nearby