Private well guide

Well Water in Michigan: Testing, Rules, Labs and Licensed Contractors

About 2,439,000 people in Michigan get their water from a private well, by the U.S. Geological Survey's estimate. Here is what the state requires, where to get it tested, and who is licensed to work on it.

571Licensed contractorschecked against state records
55Certified labsfrom the state certified list
83Counties covered
2,439,000People on private wells25% of residents (USGS, 2010)

The short version: About 2.4 million Michiganders, 25% of residents, drink from a private well (USGS estimate, 2010). That is one of the largest well populations in the country, and Michigan inspects new wells. Your local health department permits the well and requires a water sample before it goes into service. After that, testing is up to you.

Michigan at a glance
Permit to drill a home well Yes, from your local health department, under Part 127 of the Public Health Code
Who can drill it An EGLE registered well drilling contractor. Pumps are set by a registered pump installer
Water test for a new well Required. A coliform bacteria sample before a new or repaired well goes into service
Water test when a home sells Not required statewide, but several counties run time-of-sale programs
Biggest natural concern Arsenic in the southeast and the Thumb
Typical household well depth Varies by county. Logs for most wells drilled since 2000 show the depth on Wellogic
Where to test One of eight county health department labs, or a mail-in kit from the EGLE Drinking Water Laboratory ($23 for bacteria)

Who is in charge of a Michigan well

The state writes the rules, and your county does most of the hands-on work:

Agency What it handles
Local health department Issues the well permit, inspects the work, requires the water sample before the well is approved, keeps copies of well records and helps you read test results
EGLE, Water Well Construction program Runs the Part 127 well construction code, registers drillers and pump installers, and keeps the Wellogic database of well logs, where most wells drilled since 2000 show their depth, casing and yield
EGLE Drinking Water Laboratory Sells mail-in test kits to well owners statewide (517-335-8184)
Michigan Department of Health and Human Services (MDHHS) Sets the recommended testing schedule. A toxicologist will talk you through your results at 800-648-6942

Once the first sample passes, nobody checks your water again unless you ask.

What is required, and what is left to you

Part 127 of the Public Health Code is the well construction code. Every well must have:

  • A permit and an inspection. Your local health department issues the permit and checks the construction.
  • A registered contractor. Drillers and pump installers register separately with EGLE and renew every year.
  • A clean bacteria sample. A coliform sample has to be collected before a new or repaired well is placed into service.
  • A well record. State law requires the driller to give you one, with the depth, pumping rate, static water level and the rock layers drilled through. Your health department can supply a copy.
  • A wellhead above ground. State law prohibits buried wellheads, so keep the casing at least 12 inches above the ground when you landscape.

Testing after that is left to you. Here’s where the state stands:

At a glance

Water test for a new wellRequired

Michigan requires new wells to be tested at installation under the well construction code (Part 127 of the Public Health Code). Local health departments issue the permit and require the sample.

Water test when a home is soldNot required statewide

No statewide requirement, but several counties run time-of-sale or point-of-sale well and septic evaluation programs. Check the county page.

What the state recommends

EGLE recommends testing for coliform bacteria, nitrate and nitrite, fluoride, chloride, sulfate, sodium, hardness, and metals including arsenic, lead, iron, manganese, copper, uranium and others. Bacteria and nitrate yearly; a full chemistry panel every few years or when water changes.

Free or low-cost testingAvailable

Eight county health departments run their own onsite labs (Washtenaw, Oakland, Kalamazoo, Saginaw, Luce, Mackinac, Alger, Schoolcraft). Residents elsewhere can order a mail-in test through the EGLE Drinking Water Laboratory.

What the water is like in each part of Michigan

Michigan wells draw from glacial drift near the surface or from sandstone and limestone bedrock below it. Here’s what that means by region.

Region Typical household well What to expect
Southeast Michigan (around Oakland County) Glacial drift, or bedrock such as the Marshall Sandstone and Coldwater Shale Arsenic in every major aquifer. In Oakland County it rarely shows up in very shallow drift wells under 40 feet.
The Thumb Bedrock aquifers Naturally occurring arsenic that can run well above the 10 ppb federal limit. Bedrock groundwater is badly depleted from the southern state line to the Thumb.
Central Lower Peninsula The Saginaw and Marshall sandstones Hard water. Toward the center of the basin the Marshall turns to brine, the Saginaw is salty in places, and salt layers can affect supplies around Midland.
Western Upper Peninsula Igneous rock Problems with both water quality and how much water a well can find.

Nitrate from farm fertilizer is the other regional problem. It shows up in shallow wells across the agricultural counties and can cause serious illness in babies under 6 months old. Neither nitrate nor arsenic has a taste or smell. To see how deep your own well is, look up its log on Wellogic.

What to test for

This follows the MDHHS testing schedule and the EGLE list of standard private well tests.

Test How often Who needs it
Coliform bacteria and E. coli, nitrate and nitrite Every year Every well
Arsenic Every 3 to 5 years Every well, and especially in the southeast and the Thumb
Lead and PFAS At least once Every well. PFAS matters most near known contamination sites
A full chemistry panel: fluoride, chloride, sulfate, sodium, hardness, iron, manganese, copper and uranium Every few years, or when the water changes Every well
The yearly tests, right away When someone in the home is pregnant, or an infant or young child lives there Homes with a baby or young child
Bacteria retest After well repairs, flooding near the well, or a change in taste, color or smell Every well

Why arsenic gets top billing: when the USGS mapped 1,988 well samples in Oakland County, 663 of them, about 33%, were over the 10 ppb limit, and the highest reading was 221 ppb. EGLE says not to drink or cook with well water over that limit. Water softeners and carbon filters don’t remove it. If your result is high, our arsenic guide and treatment planner walk you through the fixes, and a positive bacteria test is a job for the shock chlorination calculator.

County health department labs and the EGLE lab

You have three ways to get tested in Michigan:

Option Best for Cost
County health department lab (Washtenaw, Oakland, Kalamazoo, Saginaw, Luce, Mackinac, Alger, Schoolcraft) Testing close to home, with the health department that permitted your well Set by each county
EGLE Drinking Water Laboratory mail-in kit Everyone else, for bacteria, nitrate, arsenic, metals or PFAS $23 for coliform and E. coli, $41 for nitrate and nitrite, $66 for partial chemistry, $15 for arsenic, $81 for partial metals, $320 for PFAS. Metals and partial chemistry add a $13 prep fee
Certified commercial lab A full panel or a lender’s test on a deadline Varies by lab

To order from EGLE, call 517-335-8184. Ask about turnaround time when you order. Use only the bottle the lab sends. The lab mails results but doesn’t interpret them, so call your local health department or MDHHS if something looks off. In the western Upper Peninsula, White Water Associates Laboratory also tests well water.

In 2023 the state put $5 million into free test kits, and more than 15,000 well owners asked for one within a week. That money has run out, so plan to pay for your own test.

Pick a lab near you below.

See all 55 certified labs in Michigan

Registered drillers and pump installers

Three things to know before you hire in Michigan:

  • Two registrations, renewed every year. Michigan registers well drilling contractors and pump installers separately, so check that the company holds the one for your job.
  • No registration, no work. If a company is not on the EGLE list, they are not allowed to drill or set a pump in Michigan.
  • Get your well record. The driller is required by law to give you one. If your builder hired the driller, ask the builder or the health department for a copy.

The list below is built from the EGLE registered contractor directory, so every name comes with its registration type.

See all 571 licensed contractors in Michigan

By county

Well use swings hard from county to county. These shares come from the same USGS 2010 estimate:

  • The fewest: almost nobody in Wayne County, 4% of residents in Macomb and 14% in Oakland and Ingham.
  • Just over half: Mason (56%), Ionia (55%), Gratiot (54%) and Shiawassee (54%) counties.
  • The most: Lake (93%), Oscoda (93%), Montmorency (92%) and Crawford (88%) counties.

Health department rules and time-of-sale programs also vary by county. Start with yours.

Michigan well water questions

Does Michigan require a well test when I sell my home?

Not statewide. Several counties run time-of-sale or point-of-sale evaluation programs that cover both the well and the septic system, so check the county page before you list a property.

How do I find the well log for my house?

Search Wellogic, EGLE’s statewide well record database, by address or parcel. Logs for wells drilled since 2000 are usually there. For an older well, ask your local health department.

Is arsenic in well water a real risk in Michigan?

Yes in some areas. Testing is the only way to know, because arsenic has no taste, color or smell. If your result is over 10 ppb, a point-of-use reverse osmosis unit or a whole-house adsorption system fixes it, and the county pages list treatment installers.

Who inspects a new well in Michigan?

Your local health department. They issue the permit, check the construction and require the bacteria sample before the well is approved for use.

How often should I test my well in Michigan?

Every year for coliform bacteria, E. coli, nitrate and nitrite, as MDHHS recommends. Test for arsenic every 3 to 5 years, and for lead and PFAS at least once. Retest after repairs, flooding near the well or any change in the water.